Philips Hts3367 User Manual

							51
English
Other Features
Turning on the sleep timer
The sleep timer enables the unit to switch 
to standby mode automatically after the 
selected preset time.
z Press SLEEP repeatedly until it reaches 
the desired preset turn-off time (in 
minutes):  
OFF > 60 > 45 > 30 > 15 > OFF ....
To check or change the setting
z Press SLEEP once to show the 
remaining time before switching off.  
To change the setting, press SLEEP 
repeatedly until the time is displayed.
To cancel the sleep timer
z Press SLEEP repeatedly until ‘OFF’ is 
displayed or turn off this unit to standby.
Installing the latest software
Philips provides software upgrades to 
make sure that this unit is compatible 
with the newest formats.  To check the 
updates, compare the current software 
version of this unit with the latest 
software version available at the Philips 
website.
A Press OPTIONS to select 
{ Preferences } menu.  
B Select { Version Info }, and press OK to 
check the software version of this unit.
Press OPTIONS to exit menu
DivX Subtitle
Default Parental Disc Menu
PBC
MP3/JPEG Nav
Password
Preferences
Version Info
C Write down the version number, then 
press OPTIONS to exit the menu.
D Go to www.philips.com/support to check 
the latest software version available for 
this unit.
E If the latest software version is higher 
than the software version of this unit, 
download it and store onto a CD-R or 
USB fl ash drive
F Insert the CD-R or USB fl ash drive to 
this unit and confi rm upgrade operation.
Note: 
Never unplug or turn off this unit 
during the upgrade.
G Once complete, this unit turns off to 
standby mode automatically.
 
						

							52
English
Tr o u b l e s h o o t i n g
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Never open the system as there is a risk of electric shock.
If a fault occurs, fi rst check the points listed below before taking the system for repair. 
If you are unable to solve a problem by following these instructions, consult your dealer or
Philips for help.
No picture.
Completely distorted picture 
or black/white picture.
No sound or distorted sound.
No surround sound effect 
from the speakers.–  Refer to your TVs manual for correct Video In 
channel  selection. Change the TV channel until you 
see the DVD screen.
–  Press DISC to select disc mode.
–  If this happens when you turn on the progressive scan 
feature, wait for 15 seconds for the auto recover or 
switch to the default mode as below:
  1)  Press ç to open the disc tray.
  2)  Press W on the remote control.
  3)  Press AUDIO SYNC on the remote control. 
–  If this happens when you change the HDMI video 
setting, wait for 15 seconds for the auto recover or 
switch to the default mode as below:
  1)  Press ç to open the disc tray.
  2)  Press W on the remote control.
  3)  Press ZOOM on the remote control.  
–  Check the video connection.
–  Sometimes a small amount of picture distortion may  
 appear. This is not a malfunction.
–  The disc is dirty. Clean the disc.
–  Adjust the volume.
–  Check the speaker connections and settings.
–  Make sure that the audio cables are connected and 
press the correct source button (for example, AUX
(MP3 LINK)) to choose the device that you want to 
hear through this unit.
–  Press SURROUND to select a correct surround 
sound setting.
–  Make sure that the source you are playing is recorded 
or broadcast in surround sound (DTS, Dolby Digital, 
etc).  Problem (General)  Solution
 
						

							53
EnglishThe remote control does not 
function properly.
The unit does not start 
playback.
The aspect ratio of the screen 
cannot be changed even 
though you have set the TV 
display.
Cannot activate some features 
e.g. Angles, Subtitles, or 
multi-language Audio.
Not able to select some items 
in the setup/system menu.
Unable to play DivX
® movies.
Radio reception is poor.–  Select the source you want to play (for example, 
DISC, USB or RADIO) before pressing the function 
button (u, í / ë).
–  Reduce the distance between the remote control and 
this unit.
–  Batteries are weak, replace the batteries.
–  Point the remote control directly toward the IR sensor.
–  Load a readable disc with the playback side facing 
down. The DVD+R/CD-R must be fi nalised.
–  Make sure the disc is not scratched or warped. 
–  Press OPTIONS to turn off the system setup menu  
 screen.
–  You may need to enter the password in order to 
unlock the disc for playback.
–  Moisture may have condensed inside this unit. 
Remove the disc and leave this unit turned on for 
about an hour.
–  The aspect ratio is fi xed on the DVD disc.
–  Depending on the TV, it may not be possible to 
change the aspect ratio.
–  The features may not be available on the DVD.
–  Changing the language for the sound or subtitle is  
 prohibited on this DVD.
– Press x twice before selecting the system setup 
menu.
–  Depending on the disc availability, some menu items 
cannot be selected.
–  Ensure that the DivX® fi le is encoded according to the  
 ‘Home Theatre Profi le’ with the DivX® encoder.
–  Check that the DivX® movie download is a complete 
fi le.
–  If the signal is too weak, adjust the antenna or 
connect an external antenna for better reception.
–  Increase the distance between this unit and your TV 
or VCR.
–  Tune in to the correct frequency.
–  Place the antenna further away from any equipment 
that may be causing the interference.
 Problem (Playback)  Solution
Tr o u b l e s h o o t i n g  (c o n t i n u e d )
 
						

							54
English Problem (USB/HDMI)  Solution
Tr o u b l e s h o o t i n g  (c o n t i n u e d )
The contents of the USB fl ash 
drive cannot be read.
Slow operation of the USB 
fl ash drive.
No audio output from HDMI 
connection.
No video output from HDMI 
connection. 
 –  The USB fl ash drive format is not compatible with this 
unit.
–  Drive is formatted with a different fi le system which is 
not supported by this unit (e.g. NTFS).
–  Large fi le size or high memory USB fl ash drive takes 
longer time to read and display on the TV.
–   You will not hear any sound from the HDMI output if 
the source device is only DVI/HDCP (High-bandwidth 
Digital Content Protection)-compatible.
–   It is not possible to output SACD or copy-controlled 
DVD-Audio sources from the HDMI connection.
–   Make sure that the audio output setting is not turned 
off. See ‘Setup Menu Options - { Audio Setup - HDMI 
Audio }’ for details.
–  HDMI connection can only be made to HDMI-
equipped devices with HDCP (High Bandwidth Digital 
Content Protection).  If you wish to connect to a DVI 
connector (equipped with HDCP), you will need a 
separate adaptor (DVI to HDMI).
–   Make sure the resolution of this unit matches the 
device you have connected using the HDMI.  See 
‘Setup Menu Options - { Video Setup - HDMI Setup - 
HDMI Video }’ for details.  
 
						

							55
English
AMPLIFIER Total output power:
- Home Theatre mode: 600 W 
Frequency Response:  180 Hz – 18 kHz / ±3 dB
Signal-to-Noise Ratio: > 60 dB (A-weighted)
Input Sensitivity 
- AUX:  400 mV
- SCART TO TV: 200 mV
- MP3 LINK: 400 mV
RADIO Tuning Range:    FM 87.5–108 MHz (50 kHz)
26 dB Quieting 
Sensitivity:        FM 22 dBf
IF Rejection Ratio:    FM 60 dB
Signal-to-Noise Ratio: FM 50 dB
Harmonic Distortion: FM Mono 3%
            FM Stereo 3%
Frequency Response  FM 180 Hz–10 kHz / ±6 dB
Stereo Separation  FM 26 dB (1 kHz)
Stereo Threshold  FM 29 dB
DISCLaser Type      Semiconductor
Disc Diametre  12cm / 8cm
Video Decoding  MPEG-1 / MPEG-2 /   
              / DivX 3/4/5/6, Ultra 
Video DAC      12 Bits
Signal System    PAL / NTSC
Video Format   4:3 / 16:9
Video S/N      56 dB
Composite Video 
Output         1.0 Vp-p, 75Ω
Frequency Response  4 Hz–20 kHz (44.1 kHz)
              4 Hz–22 kHz (48 kHz)
              4 Hz–44 kHz (96 kHz)
PCM         IEC 60958
Dolby Digital    IEC 60958, IEC 61937
DTS            IEC 60958, IEC 61937
USBCompatibility    Hi-Speed USB (2.0)
Class Support   UMS (USB Mass    
            Storage Class),
               MTP (Media Transfer   
            Protocol)
MAIN UNITPower Supply Rating:  220 - 240V; 50Hz
Power Consumption: 100 W
Dimensions:     435 x 58 x 360 (mm)
              (w x h x d)
Weight:         3.7  kg
FRONT SPEAKERSSystem:         Full range satellite 
Impedance:     3 Ω
Speaker drivers:  3” full range speaker
Frequency response:  150 Hz – 20 kHz
Dimensions:     103 x 202 x 71(mm)
                       (w x h x d)
Weight:            0.45 kg
REAR SPEAKERSSystem:         Full range satellite 
Impedance:     3 Ω
Speaker drivers:  3” full range speaker
Frequency response:  150 Hz – 20 kHz
Dimensions:     262 x 1199 x 264 (mm)
                       (w x h x d)
Weight:           3.29 kg
CENTRE SPEAKERSystem:         Full range satellite 
Impedance:     6 Ω
Speaker drivers:  2 x 2.5” full range speaker+  
              1 x 2” tweeter
Frequency response:  150 Hz – 20 kHz 
Dimensions:     440 x 105 x 75 (mm)
              (w x h x d)
Weight:         1.29  kg
SUBWOOFER Impedance:     6 Ω
Speaker drivers:  165mm (6.5”) woofer
Frequency response:  40 Hz – 150 Hz 
Dimensions:    163 x 363 x 369 (mm)
              (w x h x d)
Weight:         4.98  kg
Specifi cations subject to change without prior 
notice.
Specifi cations
 
						

							56
English
Glossary
Analogue audio: Sound that has not been 
turned into numbers. Analogue sound is 
available if you use the AUDIO LEFT/RIGHT. 
These red and white sockets send audio 
through two channels, the left and right.
Aspect ratio: Aspect ratio refers to the 
length to height ratio of TV screens. The 
ratio of a standard TV is 4:3, while the ratio 
of a high-defi nition or wide TV is 16:9. The 
letter box allows you to enjoy a picture with 
a wider perspective on a standard 4:3 screen.
AUDIO IN sockets: Red and white 
sockets on the back of the unit that receive 
audio from another system (TV, Stereo, 
etc.).
Bit Rate: The amount of data used to hold 
a given length of music; measured in kilobits 
per second, or kbps. Or, the speed at which 
you record. Generally, the higher the bit 
rate, or the higher the recording speed, the 
better the sound quality. However, higher bit 
rates use more space on a disc.
Chapter: Sections of a picture or a music 
piece on a DVD that are smaller than titles. 
A title is composed of several chapters. Each 
chapter is assigned a chapter number 
enabling you to locate the chapter you want.
Composite video (CVBS): A single video 
signal commonly used in most consumer 
video products.
Disc menu: A screen display prepared for 
allowing a selection of images, sounds, 
subtitles, multi-angles, etc., recorded on a 
DVD.DivX®: The DivX® code is a patent-pending, 
MPEG-4 based video compression 
technology, developed by DivX
® Networks, 
Inc., that can shrink digital video to sizes 
small enough to be transported over the 
internet, while maintaining high visual quality.
Dolby Digital: A surround sound system 
developed by Dolby Laboratories containing 
up to six channels of digital audio (front left 
and right, surround left and right, centre and 
subwoofer).
Dolby Surround Pro Logic II: It is an 
improved matrix decoding technology that 
provides better spatiality and directionality 
on Dolby Surround programme material, 
provides a convincing three dimensional 
sound fi eld on conventional stereo music 
recordings and is ideally suited to bring the 
surround experience to automotive sound. 
While conventional surround programming 
is fully compatible with Dolby Surround Pro 
Logic II decoders, soundtracks will be able to 
be encoded specifi cally to take full advantage 
of Pro Logic II playback, including separate 
left and right surround channels. (Such 
material is also compatible with conventional 
Pro Logic decoders).
DTS: Digital Theatre Systems. This is a 
surround sound system, but it is different 
from the Dolby Digital. The formats were 
developed by different companies.
HDMI: High-Defi nition Multimedia Interface 
(HDMI) is a high-speed digital interface that 
can transmit uncompressed high defi nition 
video and digital multichannel audio.  It 
delivers perfect picture and sound quality, 
completely free from noise.  HDMI is fully 
backward-compatible with DVI.
As required by the HDMI standard, 
connecting to HDMI or DVI products 
without HDCP (High-bandwidth Digital 
Content Protection) will result in no Video 
or Audio output. 
 
						

							57
English
Glossary (c o n t i n u e d )
EasyLink: Philips EasyLink uses the HDMI 
CEC industry standard protocol to share 
functionalities between the unit and its 
connected devices. This feature is only 
available if you connect this unit to a HDMI 
CEC compliant TV with a HDMI cable.  
HDCP (High-bandwidth Digital Content 
Protection) is a specifi cation that provides a 
secure transmission of digital contents 
between different devices (to prevent 
unauthorised copyright).
JPEG: A very common digital still picture 
format. A still-picture data compression 
system proposed by the Joint Photographic 
Expert Group, which features small decrease 
in image quality in spite of its high 
compression ratio. Files are recognised by 
their fi le extension ‘JPG or JPEG’.
MP3: A fi le format with a sound data 
compression system. ‘MP3’ is the 
abbreviation of Motion Picture Experts 
Group 1 (or MPEG-1) Audio Layer3. By 
using the MP3 format, one CD-R or CD-RW 
can contain about 10 times more data than a 
regular CD.
MPEG: Motion Picture Experts Group. A 
collection of compression systems for digital 
audio and video.
Multi-channel: DVDs are formatted to 
have each sound track constitute one sound 
fi eld. Multi-channel refers to a structure of 
sound tracks having three or more channels.
PBC: Playback Control. A system of 
navigating a Video CD/Super VCD through 
on-screen menus recorded onto the disc. 
You can enjoy interactive playback and 
searching.
Progressive Scan: The progressive scan 
displays twice the number of frames per 
second than in an ordinary TV system. It 
offers higher picture resolution and quality.Region code: A system allowing discs to be
played only in the region designated. This 
unit will only play discs that have compatible 
region codes. You can fi nd the region code 
of your unit by looking at the product label. 
Some discs are compatible with more than 
one region (or ALL regions).
S-Video: Produces a clear picture by 
sending separate signals for the luminance 
and the colour. You can use S-Video only if 
your TV has an S-Video In socket. 
Surround: A system for creating realistic 
three dimensional sound fi elds full of realism 
by arranging multiple speakers around the 
listener.
Title: The longest section of a movie or 
music feature on DVD. Each title is assigned 
a title number, enabling you to locate the 
title you want.
WMA: Windows Media™ Audio. Refers to 
an audio compression technology developed 
by Microsoft Corporation. WMA data can be 
encoded by using Windows Media Player 
version 9 or Windows Media Player for 
Windows XP. Files are recognised by their 
fi le extension ‘WMA’.