Philips Hts3154 User Manual

11
English
Remote Control (c o n t i n u e d )
n DISC MENU
–  For DVD, enters or exits disc contents 
menu.
–  For VCD/SVCD, enters digest menu.
o OK
– Confi rms an entry or selection.
p v V b  B
–  DISC: selects movement direction in the 
menu.
–  DISC: press left or right for fast forward 
and backward search.
–  RADIO: press up or down to tune the 
radio frequency.
–  RADIO: press left or right to start auto 
search.
q TITLE 2
–  For DVD, go back to the previous menu.
–  For VCD version 2.0 only;...

12
English
Remote Control (c o n t i n u e d )
Using the remote control
A Open the battery compartment.
B Insert two batteries type R03 or AAA,
following the indications (+-) inside
the compartment.
C Close the cover.
D  Point the remote control directly at the 
remote sensor (iR) on the front panel.
E Select the source you wish to control by 
pressing the DISC/USB, RADIO, TV, 
AUX/DI or MP3 LINE-IN button on the 
remote control.
F Then select the desired function (for 
example í, ë). CAUTION!
–  Remove...

13
English
Basic Connections
Step 1:  Placing the speakers
The Philips Home Theatre System is 
simple to install. However, proper system 
placement is critical to ensure an 
optimum sound experience.
A Place the front left and right speakers at 
equal distances from the TV and at an 
angle of approximately 45 degrees from 
the listening position.
B Place the centre speaker above the TV or 
the main unit such that the centre 
channel’s sound is localised.
C Place the rear speakers at normal 
listening ear...

14
English
AUDIO IN SPEAKERS
VIDEO OUT
AUX
Pr
Pb
SCART
YL
RAM/
MW
Step 2: Connecting to TV
This connection enables you to view the 
video playback from this unit. You only 
need to choose one of the options 
below to make the video connection.
–  For a standard TV, follow option 1.
–  For a progressive scan TV, follow 
option 2.
Helpful Hint:
–  It is important to connect this unit directly 
to the TV in order to enjoy optimum video 
quality.
Option 1: Using the Scart socket
z  Connect the scart cable...

15
English
AUDIO IN SPEAKERS
VIDEO OUT
AUX
Pr
Pb
SCART
YL
RAM/
MW
VIDEO OUT
Pr
PbY
Basic Connections (c o n t i n u e d )
Option 2: Connecting to a 
Progressive Scan TV or component 
video input
The progressive scan video quality is 
only available when using Y Pb Pr 
connection and a progressive scan TV is 
required. It provides superior picture 
quality when watching DVD movies.
A Connect the component video cables 
(red/ blue/green - not supplied) from the 
Y Pb Pr sockets on the main unit to the...

16
English
AUDIO IN SPEAKERS
VIDEO OUT
AUX
Pr
Pb
SCART
YL
RAM/
MW
Basic Connections (c o n t i n u e d )
Step 3:  Connecting speakers 
and subwoofer
z Connect all the speakers and subwoofer 
to the matching sockets at the rear of the 
main unit, Make sure that the colours of 
the plugs and sockets are matched.
Helpful Hints:
–  To prevent unwanted noise, never place 
the speakers too close to the main unit, 
subwoofer, AC power adapter, TV or any 
other radiation sources.REAR LEFT
REAR RIGHTSUBWOOFER...

17
English
AUDIO IN
VIDEO OUT
AUXPr
Pb
SCARTYL
RAM/
MW
1
2
Basic Connections (c o n t i n u e d )
FM 
antenna
AM/MW 
antenna
fi x the claw 
into the slot
Step 4:  Connecting the 
FM and AM/MW 
antennas
A Connect the supplied AM/MW loop 
antenna to the AM/MW socket. Place 
the AM/MW loop antenna on a shelf, or 
attach it to a stand or wall.
B Connect the supplied FM antenna to the 
FM 75 
Ω socket. Extend the FM antenna 
and fi x its ends to the wall.
For better FM stereo reception, connect 
an external...

18
English
RFS-VIDEOOUTINAUDIO
R             L VIDEOTO TV
ANTENNA-INTV-OUT~MAINS
TO TV - I/OEXT1AUX - I/OEXT2
AUDIO IN SPEAKERS
VIDEO OUT
AUX
Pr
Pb
SCART IN/OUT
YL
RAM/
MW
EXT 1 EXT 2
AUDIO IN
AUX L
R
CB
A A
Optional Connections
Connecting to cable box/
satellite receiver and 
recorder/VCR
You can connect the audio output from 
an analogue audio/video device (e.g. VCR, 
Cable/Satellite Box or TV) to this Home 
Theatre Audio System in order to enjoy 
the multi-channel surround sound 
capabilities  
Note:...

19
English
Finding the correct viewing 
channel
A Press SOURCE button on the main unit 
until ‘DISC’ appears on the display panel 
(or DISC/USB on the remote control).
B Turn on the TV and switch it to the 
correct video-in channel.  

20
EnglishSetting language preferences
The language options are different 
depending on your country or region. It 
may not correspond to the illustrations 
shown on the user manual.
On-screen display (OSD) language
The OSD (On-Screen Display) language 
for this unit remains as you have set it, 
regardless of the changes made to the 
DVD disc language.
A In disc mode, press SETUP on the 
remote control.