Philips Hts3152 User Manual
Here you can view all the pages of manual Philips Hts3152 User Manual. The Philips manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.
Page 11
11 English Remote Control (c o n t i n u e d ) n DISC MENU – For DVD, enters or exits disc contents menu. – For VCD/SVCD, enters digest menu. o OK – Confi rms an entry or selection. p v V b B – DISC: selects movement direction in the menu. – DISC: press left or right for fast forward and backward search. – RADIO: press up or down to tune the radio frequency. – RADIO: press left or right to start auto search. q TITLE 2 – For DVD, go back to the previous menu. – For VCD version 2.0 only;...
Page 12
12 English Remote Control (c o n t i n u e d ) Using the remote control A Open the battery compartment. B Insert two batteries type R03 or AAA, following the indications (+-) inside the compartment. C Close the cover. D Point the remote control directly at the remote sensor (iR) on the front panel. E Select the source you wish to control by pressing the DISC/USB, RADIO, TV, AUX/DI or MP3 LINE-IN button on the remote control. F Then select the desired function (for example í, ë). CAUTION! – Remove...
Page 13
13 English Basic Connections Step 1: Placing the speakers The Philips Home Theatre System is simple to install. However, proper system placement is critical to ensure an optimum sound experience. A Place the front left and right speakers at equal distances from the TV and at an angle of approximately 45 degrees from the listening position. B Place the centre speaker above the TV or the main unit such that the centre channel’s sound is localised. C Place the rear speakers at normal listening ear...
Page 14
14 English SPEAKERSAM/ MW Step 2: Connecting to TV This connection enables you to view the video playback from this unit. You only need to choose one of the options below to make the video connection. – For a standard TV, follow option 1. – For a progressive scan TV, follow option 2. Helpful Hints: – It is important to connect this unit directly to the TV in order to enjoy optimum video quality. – To hear the TV channels through this unit, connect the AUDIO IN jacks to the corresponding...
Page 15
15 English SPEAKERSAM/ MW Basic Connections (c o n t i n u e d ) Step 3: Connecting speakers and subwoofer z Connect all the speakers and subwoofer to the matching sockets at the rear of the main unit, Make sure that the colours of the plugs and sockets are matched. Helpful Hint: – To prevent unwanted noise, never place the speakers too close to the main unit, subwoofer, AC power adapter, TV or any other radiation sources.REAR LEFTREAR RIGHTSUBWOOFER FRONT CENTRE FRONT LEFT FRONT RIGHT
Page 16
16 English AM/ MW 1 2 Basic Connections (c o n t i n u e d ) FM antenna AM/MW antenna fi x the claw into the slot Step 4: Connecting the FM and AM/MW antennas A Connect the supplied AM/MW loop antenna to the AM/MW socket. Place the AM/MW loop antenna on a shelf, or attach it to a stand or wall. B Connect the supplied FM antenna to the FM 75 Ω socket. Extend the FM antenna and fi x its ends to the wall. For better FM stereo reception, connect an external FM antenna (not supplied). Helpful...
Page 17
17 English Optional Connections Connecting audio from TV When connecting the audio output from your TV to this Home Theatre System, you can have the sound of the TV output on all the speakers. It enables you to enjoy the multi-channel surround sound capabilities. z Connect an audio cable (red/white - not supplied) from the AUDIO IN-TV sockets on the main unit to the AUDIO OUT sockets on the TV. To listen to the sound, press TV on the remote control as the sound source that you want to listen...
Page 18
18 EnglishFinding the correct viewing channel A Press SOURCE button on the main unit until ‘DISC’ appears on the display panel (or DISC/USB on the remote control). B Turn on the TV and switch it to the correct video-in channel.
Page 19
19 English Setting language preferences The language options are different depending on your country or region. It may not correspond to the illustrations shown on the user manual. On-screen display (OSD) language The OSD (On-Screen Display) language for this unit remains as you have set it, regardless of the changes made to the DVD disc language. A In disc mode, press SETUP on the remote control.
Page 20
20 EnglishIf the language you want is not available in the list, select { Others }. Use the numeric keypad (0-9) on the remote control to enter the 4-digit language code ‘XXXX’ (see page 4) and press OK to confi rm. E Repeat steps C ~ D for other settings. Helpful Hints: – During DVD playback, you can switch the audio and subtitle languages by pressing the AUDIO and SUBTITLE buttons on the remote control. However, this does not change the default settings you have made here. – For some DVDs, the...