Philips Hts3100 User Manual

11
English
Remote Control (continued)
13
14
15
16
17
18
20
21
22
23
24
25
19
m SUBTITLE
–  Selects a DVD subtitle language.
n ANGLE
–  Selects a DVD disc camera angle (if
 available).
o DISC MENU
–  For DVD, enter or exit disc contents 
menu.
–  For VCD/SVCD, enter digest menu.
p W X S T
–  DISC: selects movement direction in the 
menu.
–  TUNER: press left or right to tune the 
radio frequency.
–  TUNER: press up or down to start auto  
search.
q OK
–  Confi rms a selection.
r RETURN/TITLE
–  For DVD,...

12
English
Remote Control (continued)
Using the remote control
A Open the battery compartment.
B Insert two batteries type R03 or AAA,
following the indications (+-) inside
the compartment.
C Close the cover.
D  Point the remote control directly at the 
remote sensor (iR) on the front panel.
E Select the source you wish to control by 
pressing the DISC, TUNER, TV or 
AUX/DI button on the remote control.
F Then select the desired function (for 
example ., >).CAUTION!
–  Remove batteries if they are...

13
English
Step 1:  Placing the speakers
The Philips Home Theatre System is 
simple to install.  However, proper 
system placement is critical to ensure an 
optimum sound experience.
A Place the front left and right speakers at 
equal distances from the TV and at an 
angle of approximately 45 degrees from 
the listening position.
B Place the centre speaker above the TV or 
the DVD system so that the centre 
channel’s sound is localised.
C Place the rear speakers at normal 
listening ear level facing each...

14
English
Step 2:  Connecting to TV and 
the speakers system
IMPORTANT!
Connect the DVD system directly 
to the TV.
A Use the scart cable to connect the 
SCART socket on the DVD system to 
the corresponding SCART input socket 
on the TV.
B Connect the supplied speakers and 
subwoofer to the matching speaker 
sockets on the DVD main system.
Basic Connections (continued)
FRONT 
LEFTFRONT 
RIGHT
REAR RIGHT REAR LEFTCENTER SUBWOOFER
Helpful Hints:
– To prevent unwanted noise, do not place 
the rear speakers...

15
English
Step 3:  Connecting the FM/
MW antennas
A Connect the supplied MW loop antenna 
to the MW socket.  Place the MW loop 
antenna on a shelf, or attach it to a stand 
or wall.
B Connect the supplied FM antenna to the 
FM socket.  Extend the FM antenna and 
fi x its ends to the wall.
For better FM stereo reception, connect 
an external FM antenna (not supplied).
Helpful Hints:
–  Adjust the position of the antennas for 
optimal reception.
–  Position the antennas as far away as 
possible from your...

16
English
Optional Connections
Connecting audio from an 
analogue audio/video device
You can connect the audio output from 
an analogue audio/video device (e.g. VCR, 
Cable/Satellite Box or TV) to this Home 
Theatre Audio System in order to enjoy 
the multi-channel surround sound 
capabilities
z  Use an audio cable (red/white - not 
supplied) to connect the AUX IN 
sockets on this DVD system to the 
AUDIO OUT sockets on an analogue 
audio/video device.
To listen to the sound, press AUX/DI as 
the sound...

17
English
Step 1:   Turning on the DVD 
system
A Press STANDBY ON (2).
B
 Press the SOURCE button on the front 
panel repeatedly to select :
   DISC ¤ FM ¤ MW ¤ TV ¤ AUX 
  ¤ DISC .... 
Or
z Press DISC, TUNER, TV or AUX/DI 
on the remote control.
Turning off to Eco Power standby 
mode
z Press STANDBY ON (2).

18
EnglishStep 3:  Setting language 
preferences
The language options are different 
depending on your country or region.  It 
may not correspond to the illustrations 
shown on the user manual.
On-screen display (OSD) language
The OSD (On-Screen Display) language 
for this DVD system will remain as you 
have set it, regardless of the changes 
made to the DVD disc language.
A In ‘DISC’ mode, press SETUP on the 
remote control.

19
English
If the language you want is not 
available in the list, select { Others }.
Use the numeric keypad (0-9) on the 
remote control to enter the 4-digit 
language code ‘XXXX’ (see last page) and 
press OK to confi rm.
E Repeat steps C ~ D for other settings.
Helpful Hints:
– During DVD playback, you can switch the 
audio and subtitle languages by pressing the 
AUDIO and SUBTITLE buttons on the 
remote control.  However, this does not 
change the default settings you have made 
here.
– For some...

20
EnglishD Select one of the options and press OK 
to confi rm.