Philips Hts3020 User Manual

							21
   
 
 
 
  
 
 
 
 
 
 
1  Connect a USB storage device to the   
 
 
(USB) 
 socket.
 
 
 
 
2 Press  USB 
.
   
 
 
A contents menu is displayed.   »
 
 
 
 
 
 
3 Select a fi le to play, then press   
.
   
 
 
Play star ts.   »
 
 
 
 
 
 
4  To stop play, press   
 or remove the USB 
device.
  Note
 
If the device does not fi t into the USB jack , connec t it   •through a USB ex tension cable.
   
If you connec t a multiple USB card/device reader,   •only one card/device can be accessed. 
   
Digital camer as that need PC sof tware or use PTP   •protocol are not suppor ted.
 
 
 
 
 
 
Play from radio
 
 
Check if the FM antenna has been connected 
to this Home Theater System. If not, connect 
the supplied FM antenna to the  FM75  
 
 
 jack 
and fi x its ends to the wall.
 
 
 
  
/
FM 
(75 Ω) 
ANTENNA
  Button  Action
 
  
Skips to the previous photo.
   
 
Skips to the nex t photo.
   
 
Rotates the photo clock wise.
   
 
Rotates the photo anti-
clockwise.
   
ZOOM 
Zooms in or out of the 
picture.
   
Play pause in zoom mode.
   
 
Stops play.
 
 
 
 
 
Play musical slideshow
 
 
Play MP3/ WMA music fi les and JPEG 
photo fi les simultaneously to create musical 
slideshow. The MP3/ WMA and JPEG fi les 
must be stored on the same disc or USB 
device.
   
 
 
1  Play MP3/ WMA music. 
 
 
 
 
2  Navigate to the photo folder/album and 
press  OK 
 to star t slideshow play.
   
 
 
Slideshow begins and continues till the    »
end of the photo folder or album. 
   
 
 
Audio continues to play till the end of    »
the disc.
   
 
 
 
 
 
 
To stop slideshow play, press   • 
 
.
   
 
 
To stop music play, press   • 
 
 again.
 
 
 
 
 
 
 
 
Play from USB device
 
 
This Home Theater System plays/views MP3, 
WMA, DivX (Ultra) or JPEG fi les on the 
following USB devices:
   
 
 
fl ash drive • 
   
 
 
memory card reader • 
   
 
 
HDD (ex ternal power source needed) • 
Play
English
EN
1_hts3020-05_en.indd   Sec1:211_hts3020-05_en.indd   Sec1:211/13/2009   9:10:46 AM1/13/2009   9:10:46 AM
 
						

							22
   
 
 
 
Reinstall all the radio stations
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2  Press and hold  PROGRAM 
 for more than 
5 seconds.
   
 
 
All previously stored radio stations are    »
replaced.
  Note
 
Check the r adio antenna connec tion if no stereo   •signal is detec ted or less than 5 stations are detec ted 
during r adio installation.
   
 
 
 
Search and store radio stations 
individually
   
 
 
1 Press  RADIO 
.
 
 
 
 
2 Press   
 /   
.
   
 
 
It star ts searching until a radio station    »
is detected.
   
 
 
 
 
3  Repeat step 2 until you tune to the radio 
station you wish to store.
   
 
 
To  fi netune the radio frequency,  • 
press  
   /   
.
 
 
 
 
 
 
4 Press  PROGRAM 
.
   
 
 
The preset station number blinks.   »
   
 
 
If no action is carried out within 20    »
seconds after the above step, it exits 
the preset mode.
   
 
 
 
 
5 Press   
 /   
 (or the  Numeric buttons 
) to 
select a preset number to store.
   
 
 
6 Press  PROGRAM 
 to confi rm.
 
Tip
 
For bet ter FM stereo reception, connec t an ex ternal   •FM antenna (not supplied).
   
Position the antenna as far away as possible from   •your T V, VCR or other r adiation source to prevent 
interference.
   
 
 
 
First time tuning
 
 
When you access radio mode for the fi rst 
time, follow the instructions to install the radio 
stations. 
   
 
 
1 Press  RADIO 
.
   
 
 
‘AUTO INSTALL ... PRESS PLAY’ is    »
displayed. 
   
 
 
 
 
2 Press   
.
   
 
 
All detected radio stations are stored.   »
   
 
 
Once complete, it tunes to the fi rst    »
preset radio station.
   
 
 
 
 
 
 
To stop auto tuning, press   • 
 
.
 
Note
 
This Home Theater System can store up to a   •maximum of 40 r adio stations.
   
If auto installation is not ac tivated or less than 5 r adio   •stations are stored, you will be prompted to install 
the r adio stations again.
   
 
 
 
Listen to radio
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2  Use the remote control to control the 
radio. 
  Button  Action
 
  
  
Selects a preset radio station.
   
 
  
Tunes the radio frequency up or 
down.
   
 
Press and hold this button to 
erase the current radio station 
from the preset list.
   
The preset number for other 
radio stations remain unchanged.
EN
1_hts3020-05_en.indd   Sec1:221_hts3020-05_en.indd   Sec1:221/13/2009   9:10:47 AM1/13/2009   9:10:47 AM
 
						

							23
Select a preset sound
   
  
 
 
 
 
1 Press  SOUND 
 repeatedly to select the 
sound effect that most suitable for the 
video or music you play.
  Video/Music   Description
 
 
ACTION 
 / 
  ROCK  Enhance low and 
high range for 
great sounding 
movie effects and 
atmosphere. Great 
for action movies and 
rock/pop music.
   
CONCERT 
/ 
  CLASSIC  Flat and pure sound 
mode. Ideal for 
listening to classical 
music and watching 
live concer t disc.
   
DRAMA 
 / 
  JAZZ  Clear mid and high 
range. Recreates the 
atmosphere of a live 
club with the ar tist 
just in front of you. 
Good for jazz music 
and watching dramas.
   
SPORTS 
Moderate mid range 
and surround effects 
for clear vocals and 
the atmosphere of a 
live spor ts venue. It 
is also ideal for video 
gaming.
   
NIGHT 
Dynamically 
controlled sound 
mode suitable 
for watching 
movies at night or 
for nonintrusive 
background music.
   
 
 
 
 
 
 
 
6 Adjust sound
 
 
 
 
Control the volume
 
 
 
 
1 Press  VOL +/- 
 to increase or decrease 
the volume.
   
 
 
To mute, press   • 
 
.
   
 
 
To restore the volume, press   • 
 
 again 
or press  VOL + 
.
 
 
 
 
 
 
 
 
 
Select surround sound
 
 
  
 
 
 
 
1 Press  SURR 
 repeatedly to select the best 
surround output that’s available on the 
disc.
  Option   Description
 
 
5 CH 
STEREO  Enhances the stereo 
channel output by 
duplicating the sound 
output to the centre 
and rear speakers. 
Ideal for par ty music.
   
MULTI-
CHANNEL 
 
 
/  
 
DPLII  Multi-channel 
surround output: 
Dolby Digital and 
Dolby Pro Logic II.
   
STEREO 
Stereo sound
   
 
 
 
Adjust sound
English
EN
1_hts3020-05_en.indd   Sec1:231_hts3020-05_en.indd   Sec1:231/13/2009   9:10:47 AM1/13/2009   9:10:47 AM
 
						

							24
   
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in the   •following pages.
 
 
 
 
 
[Disc Lock] 
   
Sets play restriction for specifi c discs. 
Before you star t, place the disc in the disc 
compar tment (maximum 40 discs can be 
locked).
   
 
 
  • [Lock] 
 – Restricts access to the current 
disc. Once activated, a password is 
needed to unlock and play the disc. 
   
 
 
  • [Unlock] 
 – Plays all discs.
 
Tip
 
You can set or change the password (see ‘Adjust   •set tings’ > ‘Preferences’ >  [Password] 
).
 
 
 
 
 
[Display Dim] 
   
Changes the brightness level of the display 
panel on this Home Theater System.
   
 
 
  • [10 0%]  
– Normal brightness.
   
 
 
  • [70%]  
– Medium brightness.
   
 
 
  • [4 0%] 
 – Dimmest display.
 
 
 
 
  
 
 
 
 
 
[OSD Language] 
   
Selects the default on-screen menu language.
 
 
  
 
 
 
 
 
[Screen Saver] 
   
Turns off or on the screen saver mode. Helps 
to protect the T V screen from being damaged 
due to over exposure to a static image for too 
long.
   
 
 
  • [On] 
 – Sets the screen saver to appear 
af ter 15 minutes of inactivity (for 
example, in pause or stop mode).
   
 
 
  • [Of f ] 
 – Disables screen saver mode.
 
 
 
 
  
 
 
 
 
 
 
 
 
 
 
 
7 Adjust settings
 
 
You can customise various kinds of settings as 
you prefer. Refer to the following instructions to 
navigate through the setup menus. 
  Symbol  Options
 
 
 
 
[General Setup]
 
 
 
 
[Audio Setup]
 
 
 
 
[Video Setup]
 
 
 
 
[Preferences]
 
Note
 
If the setup option is greyed out, it means the set ting   •cannot be changed in the current state.
 
 
 
 
 
General setup
 
 
 
  
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
.
Screen Saver
DivX(R) VOD Code Sleep Timer Display Dim Disc Lock
OSD Language
General Setup
EN
1_hts3020-05_en.indd   Sec1:241_hts3020-05_en.indd   Sec1:241/13/2009   9:10:48 AM1/13/2009   9:10:48 AM
 
						

							25
  Note
 
See the explanations of the above options in the   •following pages.
 
 
 
 
 
[Speakers Volume] 
   
Sets the volume level of each speaker to get 
the ideal audio balance.
  1) To star t, press  OK 
.
   
2) Select a speaker in the menu, then press  
 
 to adjust the volume level.
   
3) Press  OK 
 to confi rm and exit.
 
Note
 
The test tone is emit ted from the speaker which you   •adjust.
 
 
 
 
 
[Speakers Delay] 
   
Sets the delay time for the centre and rear 
speakers if they are placed closer to the 
listening position, so that the sound output 
from all speakers reaches the listening position 
at the same time. 
  1) To star t, press  OK 
.
   
2) Select a speaker in the menu, then press  
 
 to set the delay time.
   
3) Press  OK 
 to confi rm and exit.
 
Note
 
Allow 1ms set ting for ever y 1 foot distance between   •the speaker and the listening position.
 
 
 
 
 
[Night Mode] 
   
Makes loud sound level sof ter and sof t sound 
level louder so that you can watch the DVD 
movies at a low volume, without disturbing 
others.
   
 
 
  • [On] 
 – Enjoy quiet viewing at night.
   
 
 
  • [Of f ] 
 – Enjoy surround sound with a full 
dynamic range.
  Note
 
Applicable only to Dolby Digital encoded discs.  •
[Sleep Timer] 
   
Switches to standby automatically af ter the 
preset time.
   
 
 
  • [15 mins] 
,  [30 mins] 
,  [45 mins] 
,  [60 mins] 
 
– Selects the count down time before 
the Home Theater System switches to 
standby.
   
 
 
  • [Of f ] 
 – Disables sleep timer mode.
 
 
 
 
  
 
 
 
 
 
[DivX(R) VOD Code] 
   
Displays the DivX® registration code.
 
Tip
 
Enter this Home Theater System DivX registr ation   •code when you rent or purchase a video from w w w.
div x.com/vod. The DivX videos rented or purchased 
through the DivX® VOD ( Video On Demand) 
ser vice can be played only on the device to which it 
is registered.
   
 
 
 
 
Audio setup
 
 
 
  
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Audio Setup] 
, then 
press  
  .
 
 
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
CD UpsamplingCD Upsampling
Speakers Delay Speakers Volume
Night Mode
Audio Setup
Adjust settings
English
EN
1_hts3020-05_en.indd   Sec1:251_hts3020-05_en.indd   Sec1:251/13/2009   9:10:48 AM1/13/2009   9:10:48 AM
 
						

							26
[TV Display] 
   
Selects one of the following display formats:
 
 
 
 
 
 
 
  • [4:3 Pan Scan] 
 – For 4:3 screen T V: full-
height display with the trimmed sides.
   
 
 
  • [4:3 Let ter Box] 
 – For 4:3 screen T V: 
wide-screen display with black bars on 
the top and bottom of the screen.
   
 
 
  • [16:9 Wide Screen] 
 – For wide-screen 
T V: display ratio 16:9.
   
 
 
  
 
 
 
 
 
[Picture Setting] 
   
Selects a predefi ned set of picture color 
settings or customize the personal setting.
   
 
 
  • [Standard] 
 – Original color set ting.
   
 
 
  • [Bright] 
 – Vibrant color set ting.
   
 
 
  • [Soft] 
 – Warm color set ting.
   
 
 
  • [Personal] 
 – Customizes the color set ting. 
Set the level of brightness, contrast, 
sharpness/tint and color saturation, then 
press  OK 
.
 
 
 
 
  
4:3 Letter Box (LB) 4:3 Pan Scan (PS)
16:9 (Wide Screen)
   
 
 
 
 
 
 
 
 
 
 
Video setup
 
 
 
  
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Video Setup] 
, then 
press  
  .
 
 
 
 
3  Select an option, then press  OK 
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in the   •following pages.
 
 
 
 
 
[TV System] 
   
Change this setting if the video does not 
appear correctly. By default, this set ting 
matches the most common setting for T Vs in 
your country.
   
 
 
  • [PAL] 
 – For PAL-system T V.
   
 
 
  • [NTSC] 
 – For NTSC-system T V.
   
 
 
  • [Multi] 
 – For T V that is compatible with 
both PAL and NTSC .
   
 
 
  
 
 
 
 
 
Video Setup
Picture Setting TV Display TV System
EN
1_hts3020-05_en.indd   Sec1:261_hts3020-05_en.indd   Sec1:261/13/2009   9:10:49 AM1/13/2009   9:10:49 AM
 
						

							27
  Note
 
If the language you have set is not available on the   •disc, the disc uses its own default language.
   
For some discs, the subtitle/audio language can only   •be changed from the disc menu.
   
To selec t the languages that are not listed in the   •menu, selec t  [Others] 
. Then check the Language 
Code list at the back of this user manual and enter 
the respec tive 4 -digit language code.
   
 
 
 
[Parental] 
   
Restricts access to discs that are unsuitable 
for children. These types of discs must be 
recorded with ratings.
  1) Press  OK 
.
   
2) Select a rating level, then press  OK 
.
   
3) Press the  Numeric buttons 
 to enter the 
password.
  Note
 
Rated discs above the level you set in    •[Parental] 
 
require a password to be played.
   
The r atings are countr y-dependent. To allow all discs 
  •to play, selec t ‘ 8 
’.
   
Some discs have r atings printed on them but are not   •recorded with r atings. This func tion has no ef fec t on 
such discs.
  Tip
 
You can set or change the password (see   •‘Preferences’ >  [Password] 
).
 
 
 
 
 
[PBC] 
   
Turns off or on the content menu of VCDs/
SVCDs with PBC (playback control) feature.
   
 
 
  • [On] 
 - Displays index menu when you 
load a disc for play.
   
 
 
  • [Of f ] 
 - Skips the menu and star t play 
from the fi rst title.
 
 
 
 
  
 
 
 
 
 
[MP3/JPEG Display] 
   
Selects to display the folders or display all the 
fi les.
   
 
 
  • [View Folders] 
 – Displays the folders of 
MP3/WMA fi les.
   
 
 
  • [View Files] 
 – Displays all the fi les.
 
 
 
 
 
 
 
 
 
 
Preferences
 
Note
 
Stop disc play before you can access to   • 
[Preferences] 
.
 
 
 
 
  
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Preferences] 
, then 
press  
  .
 
 
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in the   •following pages.
 
 
 
 
 
[Audio] 
   
Selects the default audio language for disc play.
 
 
  
 
 
 
[Subtitle] 
   
Selects the default subtitle language for disc 
play.
   
  
 
 
 
[Disc Menu] 
   
Selects the language for disc menu.
Parental
MP3/JPEG Display PBC SubtitleAudio
Preferences
Disc Menu
DivX Subtitle Password
Adjust settings
English
EN
1_hts3020-05_en.indd   Sec1:271_hts3020-05_en.indd   Sec1:271/13/2009   9:10:49 AM1/13/2009   9:10:49 AM
 
						

							28
  Note
 
Ensure that the subtitle fi le has the exac t same fi le   •name as the movie fi le. If for example the fi le name 
of the movie is ‘Movie.avi’, then you will need to 
name the tex t fi le ‘Movie.sub’ or ‘Movie.sr t’. 
 
 
 
 
 
[Version Info.] 
   
Displays the sof tware version of this Home 
Theater System.
  Tip
 
This infor mation is required when you want to fi nd   •out if a newest sof tware ver sion is available at the 
Philips website that you may download and install on 
this Home Theater System.
   
 
 
 
[Default] 
   
Resets all the settings of this Home Theater 
System to factor y default, except for  [Disc 
Lock] 
,  [Password] 
 and  [Parental] 
 settings.    
 
 
 
[Password] 
   
Sets or changes the password for locked discs 
and play restricted DVDs.
   
  
 
1) Press the  Numeric buttons 
 to enter 
‘136900’ or the last set password at  [Old 
Password] 
 fi eld.
   
2) Enter the new password at  [New 
Password] 
 fi eld.
   
3) Enter the new password again at  [Confi rm 
Password] 
 fi eld.
   
4) Press  OK 
 to exit the menu.
 
Note
 
If you forget the password, enter ‘13690 0’ before you   •set a new password.
 
 
 
 
 
[DivX Subtitle] 
   
Selects a character set that suppor ts the DivX 
subtitle.
   
[Standard] 
English, Irish, Danish, Estonian, 
Finnish, French, German, Italian, 
Por tuguese, Luxembourgish, 
Nor wegian (Bokmål and 
Nynorsk), Spanish, Swedish, 
Tu r k i s h
   
[Central 
Europe]  Polish, Czech, Slovak, Albanian, 
Hungarian, Slovene, Croatian, 
Serbian (Latin script), Romanian
   
[Cyrillic] 
Belarusian, Bulgarian, Ukrainian, 
Macedonian, Russian, Serbian
   
[Greek] 
Greek
Old Password
New Password
Confirm Password
OK Change Password
EN
1_hts3020-05_en.indd   Sec1:281_hts3020-05_en.indd   Sec1:281/13/2009   9:10:49 AM1/13/2009   9:10:49 AM
 
						

							29
  Note
 
Do not remove the CD-R or USB when sof tware   •updating is in progress.
 
 
 
 
 
 
8  Disconnect the power cord for a few 
seconds and connect again to reboot the 
system.
   
 
 
 
 
 
 
Care
 
Caution
 
Never use solvents such as benzene, thinner,   •cleaner s available commercially or anti-static spr ays 
intended for discs.
   
 
Clean discs 
   
Wipe the disc with a micro fi bre cleaning cloth 
from the centre to the edge in a straight line 
movement.
   
  
 
 
 
Clean main unit screen 
   
Wipe the screen surface with a micro fi bre 
cleaning cloth.
   
 
 
 
 
 
8 Additional 
Information
   
 
 
Update software
 
 
To check for new updates, compare the current 
software version of your Home Theater System 
with the latest software version (if available) at 
the Philips website.
   
 
  
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
 
 
 
 
2 Select  [Preferences] 
 >  [Version Info.] 
, 
then press  OK 
.
 
 
 
 
3  Write down the version number, then 
press  
   
 SETUP 
 to exit the menu.
 
 
 
 
4  Go to w w w.philips.com/suppor t to check 
the latest sof tware version available for 
this Home Theater System.
   
 
 
5  If the latest sof tware version is higher 
than the sof tware version of this Home 
Theater System, download it and store 
onto a CD-R or USB fl ash drive.
 
 
 
 
6  Inser t the CD-R or USB fl ash drive to this 
Home Theater System.
   
 
 
7 Press  DISC 
 or  USB 
, then follow the 
instruction on the T V to confi rm update 
operation.
   
 
 
Once software update is complete,    »
this Home Theater System turns off to 
standby automatically.
MP3/JPEG Display
DivX Subtitle Password ParentalDisc Menu
Preferences
PBC
Default Version Info.
Additional Information
English
EN
1_hts3020-05_en.indd   Sec1:291_hts3020-05_en.indd   Sec1:291/13/2009   9:10:49 AM1/13/2009   9:10:49 AM
 
						

							30
Radio 
   
 
 
Tuning range: FM 87. 5 –108 MHz (50 kHz) • 
   
 
 
26 dB quieting sensitivity: FM 22 dBf • 
   
 
 
IF rejection ratio: FM 50 dB • 
   
 
 
Signal-to-noise ratio: FM 30 dB • 
   
 
 
Harmonic distor tion: FM 3% • 
   
 
 
Frequency response: FM 180 Hz~10 kHz  • 
/ ±3 dB
   
 
 
Stereo separation: FM 26 dB (1 kHz) • 
   
 
 
Stereo Threshold: FM 23.5 dB • 
 
 
 
 
  
 
 
 
 
 
USB 
   
 
 
Compatibility: USB • 
   
 
 
Class suppor t: UMS (USB Mass Storage  • 
Class)
   
 
 
File s ys te m: FAT12 , FAT16 , FAT 32 • 
 
 
 
 
  
 
 
 
 
 
Main Unit 
   
 
 
Power supply: 220~240 V; ~50 Hz • 
   
 
 
Power consumption: 50 W  • 
   
 
 
Standby power consumption: < 1 W  • 
   
 
 
Dimensions ( WxHxD): 360 x 48 x 332  • 
(m m)
   
 
 
Weight: 2.64 kg • 
 
 
 
 
  
 
 
 
 
 
Speakers  
   
 
 
System: full range satellite • 
   
 
 
Speaker impedance: 8 ohm (centre), 4  • 
ohm (Front/Rear)
   
 
 
Speaker drivers: 3” full range  • 
   
 
 
Frequency response: 150 Hz - 20 kHz • 
   
 
 
Dimensions (WxHxD): • 
   
 
 
Centre: 100 x 100 x 75 (mm) • 
   
 
 
Front /Rear: 100 x 100 x 75 (mm) • 
   
 
 
 
 
Weight :  • 
   
 
 
Centre: 0.38 kg • 
   
 
 
Front /Rear: 0.38 kg/each • 
 
 
 
 
 
 
  
 
 
 
 
 
Subwoofer 
   
 
 
Impedance: 8 ohm • 
   
 
 
Speaker drivers: 165 mm (6.5”) woofer • 
   
 
 
Frequency response: 45 Hz ~ 150 Hz • 
   
 
 
Dimensions ( WxHxD): 122.6 x 309. 5 x  • 
369 (mm)
   
 
 
Weight: 3. 54 kg • 
 
 
 
 
 
 
9 Specifications
 
Note
 
Specifi cation and design are subjec t to change   •without notice
 
 
 
 
Playback media 
   
 
 
DVD -Video, DVD+R /+RW, DVD - R /- • 
RW, DVD+R DL, CD-R /CD-RW, Audio 
CD, Video CD/SVCD, Picture CD, MP3-
CD, WMA-CD, DivX-CD, USB fl ash 
drive
   
 
 
  
 
 
 
 
 
Amplifi er  
   
 
 
Total output power: • 
   
 
 
Home Theatre mode: 200 W • 
   
 
 
 
 
Frequency response: 63 Hz~14 kHz /  • 
±3 dB
   
 
 
Signal-to-noise ratio: > -60 dB  • 
(A-weighted)
   
 
 
Input sensitivity: • 
   
 
 
AUX: 500 mV • 
   
 
 
SCART TO T V: 500 mV • 
   
 
  • 
 
 
 
 
 
 
  
 
 
 
 
 
Disc 
   
 
 
Laser Type: Semiconductor • 
   
 
 
Disc diameter: 12 cm / 8 cm • 
   
 
 
Video decording: MPEG1/ MPEG2 / DivX  • 
/ DivX Ultra
   
 
 
Video DAC: 12 bits, 108 MHz • 
   
 
 
Signal system: PAL / NTSC • 
   
 
 
Video S/N: 56 dB  • 
   
 
 
Audio DAC: 24 bits / 96 kHz • 
   
 
 
Frequency response:  • 
   
 
 
4 Hz–20 kHz (44.1 kHz) • 
   
 
 
4 Hz–22 kHz (48 kHz) • 
   
 
 
4 Hz– 44 kHz (96 kHz) • 
   
 
 
 
 
PCM: IEC 60958 • 
   
 
 
Dolby Digital: IEC 60958, IEC 61937 • 
 
 
 
 
  
 
 
 
 
 
EN
1_hts3020-05_en.indd   Sec1:301_hts3020-05_en.indd   Sec1:301/13/2009   9:10:49 AM1/13/2009   9:10:49 AM