Philips Hts 7140 User Manual
Have a look at the manual Philips Hts 7140 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
19 Set up network 1 Press ( Home). 2 Select [Setup] , then press OK . 3 Select [Network] , then press OK . 4 Select and adjust the following set tings: [Network Installation] : Star ts wired (Ethernet) setup. Follow the instructions to set up the network connection. [ View Network Settings] : Displays the current network set tings. [Net TV User Location] : Selects the location for accessing Net T V content and ser vices. [Clear Net TV Memory] : Clears Net T V memor y, delete the temporar y downloaded les (e.g., cookies) of the Net T V browser. 5 Press OK to con rm your choice. Note Net T V feature only available in Latin America. Set up EasyLink 1 Press ( Home). 2 Select [Setup] , then press OK . 3 Select [EasyLink] , then press OK . 4 Select and adjust the following set tings: [EasyLink] : Enables or disables EasyLink. [One Touch Play] : Enables or disables One Touch Play. If enabled, you can use the remote control to star t disc play in the home theater and the T V switches automatically to the correct channel. [One Touch Standby] : Enables or disables One Touch Standby. If enabled, the home theater can be switched off to standby by a remote control from the T V or other connected HDMI CEC devices. [Blu-ray 3D video] : Selects the 3-dimensional video output when you play a 3D video on your home theater. The home theater must be connected to a 3D T V through HDMI. [Picture Settings] : Selects a prede ned color setting. 5 Press OK to con rm your choice. Note The best set ting is automatically selected for the T V. If you change the set ting, ensure that the T V suppor ts the new set ting. For set tings related to HDMI, the T V must be connected through HDMI. For set tings related to progressive or component video, the T V must be connected through Component Video. Change audio settings 1 Press ( Home). 2 Select [Setup] , then press OK . 3 Select [Audio] , then press OK . 4 Select and adjust the following set tings: [Night Mode] : Selects quiet or full dynamic sound. Night mode decreases the volume of loud sounds and increases the volume of sof t sounds such as speech. [HDMI Audio] : Selects HDMI audio format or disables HDMI audio output for the T V. [Ambisound Setup] : Sets up Ambisound to give the best surround sound effect. Follow the instructions on the T V to complete the setup. 5 Press OK to con rm your choice. Note For set tings related to HDMI, the T V must be connected through HDMI. Night mode is available for Dolby encoded DVD and Blu-ray discs (for models suppor t Blu-ray playback). English EN
20 [Change Password] : Sets or changes a PIN code to play a restricted disc. Enter ‘ 0000’ if you do not have a PIN or if you have forgot ten your PIN. [Display Panel] : Changes the brightness of the display panel. [Auto St andby] : Enables or disables auto standby. If enabled, the home theater switches to standby af ter 30 minutes of inactivity (for example, in pause or stop mode). [VCD PBC] : Displays or skips the content menu for VCD and SVCD discs. [Sleep Timer] : Sets a sleep timer to switch the home theater to standby af ter a speci c time. 5 Press OK to con rm your choice. Note If your preferred disc language is not available, you can select [Other] from the list and enter the 4-digit language code which can be found at the back of this manual. If you select a language that is not available on a disc, the home theater uses the default language of the disc. Change advanced settings 1 Press ( Home). 2 Select [Setup] , then press OK . 3 Select [Advanced] , then press OK . 4 Select and adjust the following set tings: [BD-Live Security] : Restricts or allows access to BD-Live. [Software Update] : Selects to update sof tware from the network or from USB storage device. [Clear memory] : Clears local memor y, delete the BD-Live les that you previously downloaded. If using an USB storage device, the local storage folder is ‘BUDA’. [System Audio Control] : Enables or disables System audio control. If enabled, follow the instructions on the T V to map the connected devices correctly to the audio connectors of the home theater. The home theater switches automatically to the audio source of the connected device. [Audio Input Mapping] : Updates audio input mapping if there are new devices connected. 5 Press OK to con rm your choice. Note The connected devices must be connected through HDMI and switched on. Change preference settings 1 Press ( Home). 2 Select [Setup] , then press OK . 3 Select [Preference] , then press OK . 4 Select and adjust the following set tings: [Menu language] : Selects the on-screen display menu language. [Audio] : Selects audio language for video. [Subtitle] : Selects subtitle language for video. [Disc Menu] : Selects menu language for video disc. [Parental Control] : Restricts access to discs that are recorded with ratings. To play all discs irrespective of the rating, select level ‘8’. [Screen Saver] : Enables or disables screen saver mode. If enabled, the screen enters idle mode af ter 10 minutes of inactivity (for example, in pause or stop mode). [Auto Subtitle Shift] : Enables or disables shift subtitle. If enabled, it adjusts the subtitle position automatically to t the TV screen. EN
21 6 Update software To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. Check software version 1 Press ( Home). 2 Select [Setup] , then press OK . 3 Select [Advanced] > [Version Info.] , then press OK . » The software version is displayed. Update software from the network 1 Prepare the internet connection (s e e ‘Connect to the Internet’ on page 10 ). 2 Press ( Home ) and select [Setup] . 3 Select [Advanced] > [Software Update] > [Network] . » If an upgrade media is detected, you are prompted to star t or cancel the update. 4 Follow the instruction on the T V to con rm the update. » When complete, the home theater automatically switches off and restar ts. If not, disconnect the power cord for a few seconds and then reconnect it. Note If the home theater is unable to connect to the Philips ser ver, press ( Home), select [Setup] > [Network] > [Network Installation] to set up the network. [DivX ® VOD Code] : Displays the DivX VOD registration code for the home theater. [Version Info.] : Displays the sof tware version for the home theater. [Restore default settings] : Resets the home theater to the default set tings programmed at the factory. 5 Press OK to con rm your choice. Note You cannot restrict internet access on commercial Blu-ray discs. Before you purchase DivX videos and play them on the home theater, register the home theater on w w w.div x.com using the DivX VOD code. You cannot reset parental control set ting to its default value. English EN
22 6 Unzip the downloaded le in the root director y of the USB storage device. » A le named ‘ HTSxxxxeDFU.zip’ i s extracted in the ‘\UPG’ folder of your USB storage device, ‘xxxx’ being the model number of your home theater. 7 Disconnect the USB storage device from the PC , and connect it to the home theater. 8 Press ( Home). Ensure that there is no disc inside the disc compar tment of your home theater and it is closed. 9 Press [3] , [3] , [8] on the remote control. » Software update star ts. When complete, the home theater automatically switches off and restar ts. 10 When complete, disconnect the USB storage device from the home theater. Caution Do not turn off the power or remove the USB storage device during the update. If power failure occurs during the update, do not remove the USB ash drive from the home theater. The home theater continues the update as soon as the power is restored. If an error occurs during the update, retr y the procedure. If the error reoccurs, contact Philips Consumer Care. Update software from a USB 1 Check for the latest software version on www.philips.com/support. Search for your model and click on ‘software and drivers’. 2 Create a folder named ‘UPG’ in the root director y of your USB storage device. 3 Download the sof tware into the ‘\UPG’ folder of the USB storage device. 4 Unzip the sof tware in the ‘\UPG’ folder. 5 Connect the USB storage device to the home theater. 6 Press ( Home ) and select [Setup] . 7 Select [Advanced] > [Software Update] > [USB] . 8 Follow the instructions on the T V to con rm the update. » When complete, the home theater automatically switches off and restar ts. If not, disconnect the power cord for a few seconds and then reconnect it. Caution Do not turn off the power or remove the USB storage device when the sof tware update is in progress because you might damage the home theater. Update electronic user manual 1 Check the current version of the electronic user manual installed in your home theater (see ‘Check software version’ on page 21 ). 2 Inser t a USB storage device into your PC . 3 In your web browser, navigate to w w w. philips.com/suppor t, and nd your product. 4 Click on ‘Sof tware and drivers’ in the lef t panel, and then locate the ‘Electronic Manual’. The electronic user manual is compressed into a *.zip archive. 5 If the *.zip le at the Philips Suppor t website is a later version than the le in your home theater, download the le in the root director y of your USB storage device. EN
23 • Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) • Input sensitivity: AUX: 1500 mV MP3 LINK: 750 mV Video • Signal system: PAL / NTSC • Component video output: 480i/576i, 480p/576p, 720p, 1080i • HDMI output: 480i/576i, 480p/576p, 720p, 1080 i, 1080 p, 1080 p24 Audio • S/PDIF Digital audio input: Coaxial: IEC 60958-3 Optical: TOSLINK • Sampling frequency: MP3: 32 kHz, 44.1 kHz, 48 kHz WMA: 44.1 kHz, 48 kHz • Constant bit rate: MP3: 112 kbps - 320 kbps WMA: 48 kbps - 192 kbps Radio Tuning range: Europe/China: FM 87. 5-108 MHz (50 kHz) Asia Paci c/Russia/Latin America/India: FM 87. 5-108 MHz (50/100kHz) Signal-to-noise ratio: FM 55 dB Frequency response: FM 60 Hz-12. 5 kHz / ±3dB USB • Compatibility: Hi-Speed USB (2.0) • Class suppor t: UMS (USB Mass Storage Class) • File system: NTFS, FAT16, FAT32 • Maximum memor y suppor t: < 160GB Main Unit • Power supply: Europe/Russia/China/India: 220 -240V, ~50Hz Asia Paci c/Latin America: 110 -127 V/ 2 2 0 -24 0 V; ~50-60Hz switchable • Power consumption: 115 W • Standby power consumption: < 0.22 W 7 Product specifications Note Speci cation and design are subject to change without notice. Region code The type plate on the back or bottom of the home theater shows which regions it suppor ts Playback media • AVCHD, BD-RE, BD-Video, DVD -Video, DVD+R /+RW, DVD -R /-RW, DVD+R /-R DL, CD-R /CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX (Ultra)-CD, USB storage device File Format • Audio: .mp3, .wma, .mka • Video: .avi, .asf, .div x, .mk v, .mpg, .mpeg, .wmv • Picture: .jpg, .gif, .png • Ampli er • Total output power : 500W RMS, 10% THD • Frequency response: 40 Hz-20 kHz / ±3dB Country DVD BD Europe, United Kingdom Korea Latin America Australia, New Zealand Russia, India China AAAACCCC Asia Pacific, Taiwan, English EN
24 8 Troubleshooting Warning Risk of electric shock . Never remove the casing of the product. To keep the warranty valid, never tr y to repair the product yourself. If you have problems using this product, check the following points before you request ser vice. If you still have a problem, register your product and get suppor t at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back or bottom of your product. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Main unit The buttons on this home theater do not work. • Disconnect the home theater from the power outlet for a few minutes, then reconnect. Picture No picture. • Ensure that the T V is switched to the correct source for the home theater. No picture on HDMI connection. • Change the HDMI video set ting or wait for 15 seconds for auto recover. • Check if the HDMI cable is faulty. Replace with a new HDMI cable. No picture on the Component (Y Pb Pr) connection. • If the HDMI video connection is set to [Auto] or [10 8 0p/24Hz] , there is no video output through the component connection. Change the HDMI video set ting or remove the HDMI connection. No high-de nition video signal on the TV. • Ensure that the disc contains high-de nition video. • Ensure that the TV suppor ts high-de nition video. Sound No sound. • Ensure that the audio cables are connected and select the correct input source (for example, SOURCE / AUDIO SOURCE ) for the device you want to play. • Center speaker: Speaker impedance: 4 ohm Speaker driver: 2 x 64 mm (2. 5”) full range Frequency response: 150 Hz-20 kHz • Front/Rear speakers: Speaker impedence: 6 ohm Speaker drivers: 4 x 64 mm (2. 5”) full range Frequency response: 150 Hz-20 kHz • Dimensions ( WxHxD): 955 x 155 x 96 mm • Weight: 6.4 kg Subwoofer • Impedance: 4 ohm • Speaker driver: 165 mm (6. 5”) woofer • Frequency response: 20 Hz-150 Hz • Dimensions (WxHxD): 196 x 397 x 342 (mm) • Weight: 6.03 kg Wall Mount • Dimensions (WxHxD): 682 x 108 x 17 (mm) • Weight: 1.3 kg Laser Speci cation • Laser Type : InGaN/AIGaN (BD), InGaAIP (DVD), AIGaAs (CD) • Typical Waveleng th: 405 nm (BD), 660 nm (DVD), 783 nm (CD) • Output power (Max. ratings): 20 mW (BD), 130 mW (DVD), 160 mW (CD) EN
25 • Ensure that the USB storage device is format ted with a le system that is suppor ted by the home theater. ‘No entry’ or ‘x’ sign appears on the TV. • The operation is not possible. EasyLink feature does not work. • Ensure that the home theater is connected to a Philips brand EasyLink T V and that EasyLink is on . I do not want my home theater to be switched on when I switch on my TV. • This is the correct behavior for Philips EasyLink (HDMI-CEC). To make the home theater work independently, switch off EasyLink . I cannot access BD-Live features. • Check the network connection (s e e ‘Connect to the Internet’ on page 10 ) or ensure that the network has been set up (see ‘Set up network ’ on page 10 ). • Clear memory storage (see ‘Change advanced set tings’ on page 20 ). • Ensure that the Blu-ray disc suppor ts BD-Live feature. The video (movies, photos, video clips, etc.) contents of the iPod/iPhone do not display on TV. • Video and photo browsing is not suppor ted, you can only browse the video and photo contents on the iPod/iPhone itself. Cannot see pictures from my iPod/iPhone on the TV. • Connect a yellow composite cable from the dock to the T V. • Switch the T V to the AV/ V I D E O source (corresponding to the yellow composite cable). • Press PLAY on the iPod or iPhone to star t the slideshow. The audio is interrupted when I play music from my iPod or iPhone in the docking station. • Ensure that you have installed the latest rmware on your iPod or iPhone. For more information, refer to the suppor t website of your iPod or iPhone. My 3D video plays in 2D mode. • Ensure that your home theater is connected to your 3D T V through HDMI. • Ensure that your disc is a Blu-ray 3D disc. • Ensure that the [Blu-ray 3D video] set ting is turned on (see ‘Change video set tings’ on page 18 ). I see black video on my TV screen. • Ensure that your home theater is connected to the T V through HDMI. • Switch to the correct HDMI source on your T V. No sound on HDMI connection. • You might not hear any sound if the connected device is not HDCP (High- bandwidth Digital Content Protection) compliant or only DVI compatible. Use an analog or digital audio connection. • Ensure that the [HDMI Audio] is enabled . No sound from TV program. • Connect an audio cable from the audio input on the home theater to the audio output on the T V, then press SOURCE / AUDIO SOURCE repeatedly to select the correct audio source. Distorted sound or echo. • Ensure that the TV volume is muted or set to minimum if you are playing audio through the home theater. Audio and video are not synchronized. • 1) Press SOUND SETTINGS / (Sound OPTIONS ) . 2) Press the Navigation buttons (left/right) repeatedly until AUDIO SYNC is displayed, then press OK . 3) Press the Navigation buttons (up/down) to sync the audio with the video. Play Disc cannot be played. • Clean the disc. • Ensure that the home theater suppor ts the disc (see ‘Product speci cations’ on page 23 ). • Ensure that the home theater suppor ts the region code of the disc. • For DVD±RW or DVD±R , ensure that the disc is nalized. DivX video les cannot be played. • Ensure that the DivX le is encoded according to the ‘Home Theater Pro le’ with the DivX encoder. • Ensure that the DivX video le is complete. DivX subtitles do not display correctly. • Ensure that the subtitle le name is the same as the movie le name. • Select the correct character set: 1) Press OPTIONS / ( OPTIONS). 2) Select [Character Set] . 3) Select the suppor ted character set. 4) Press OK . The contents of a USB storage device cannot be read. • Ensure that the format of the USB storage device is compatible with the home theater (see ‘Product speci cations’ on page 23 ). English EN
26 F le formats23 H HDMI CEC (see Easylink)17 I Internet BD-Live 13 connect 10 iPod play 17 slideshow 17 L language audio 14 ,20 disc menu 20 on-screen display 20 subtitle 14 ,20 M MP3 play 17 N Net TV15 network set up 10 O one-touch play17 ,19 one-touch standby17 ,19 overview connectors 7 main unit 4 remote control 4 P password (PIN code)20 picture OPTIONS 15 rotate 15 slide show 15 ,15 troubleshooting 24 9 Index 3 3D video14 A ampli er23 audio connection 9 language 20 synchronize with video 12 audio input mapping17 ,19 B BD-Live access 13 set up 10 Bonus View13 Browse Net T V 15 C care2 change settings18 chapter14 connect audio from T V 9, 17 guide 7 other devices 9 TV 8 connectors7 contact us24 D disc play 12 suppor ted discs 23 disposal of your product3 DivX character set 14 E EasyLink settings 17 ,19 EN
27 T time search video14 title14 troubleshooting24 TV audio from T V 9, 17 connect 8 U USB play 14 software update 22 V video OPTIONS 14 synchronize with audio 12 picture-in-picture 2nd audio language 13 2nd subtitle language 13 enable 13 play 2D video 14 3D video 14 disc 12 MP3 player 17 OPTIONS 12 radio 16 troubleshooting 25 USB storage device 14 product care2 product speci cations23 R radio play 16 program 16 tune 16 recycle3 region code23 remote control4 repeat14 ,12 rotate pictures15 S safety2 settings EasyLink 19 parental control 20 preferences 20 slideshow animation 15 duration 15 play from iPod/iPhone 17 play musical slideshow 15 software update 21 version 21 sound auto volume 11 mode 12 surround 12 treble and bass 12 troubleshooting 24 subtitle language 14 ,20 subtitle shift14 ,20 system audio control17 English EN