Philips Bsure Sv2 Brilliance Projector User Manual

•Use the Zoom ring to adjust the size of the image.
•Use the Focus ring to adjust the focus of the image.
To raise:
•Keep knob A pressed and lift to raise the projector.
–The Height/Level Adjuster B will come out.
To Lower:
•Keep knob A pressed and gently lower the projector.
•Use the Focus Ring and Zoom Ring to readjust the focus and size of the image.
If projector and screen are not properly placed, the picture will be distor ted, producing a
keystoned image (picture top width larger than picture...

Computer input
The computer input is suitable for both Apple Macintosh computers (Power Book and Power Mac) as
well as for IBM compatible PCs. The projector is Microsoft (R), Windows (R) 95/98/ME/2000/XP
compatible and accepts input signals from all computers that meet following specifications:
•Multi scan VGA-SXGA
•Horizontal scan rate: 15-108 kHz
•Ver tical refresh rate: 50-120 Hz
•Bandwith: 140 MHz
•Display Data Channel DDC: 1/2B
The data output of IBM compatible PCs can be connected directly to the...

>
PC/Macintosh
1Connect the Data (out) socket of the computer to the Computer (in) socket of the
projector and secure the plugs by tightening the thumb screws.
For this, use the VGA/USB cable supplied (1a).
2Connect the USB (upstream) socket of the projector to the USB downstream por t of the
computer.
For this, use the VGA/USB cable supplied (1b).
or :
2Connect the PS/2 (out) socket of the projector to the PS/2 (in) socket of the computer.
For this, use an optional PS/2 cable (2).
•When switching...

Connecting to an external monitor
1Connect the VGA Y connector marked ‘Projector’(4a), of an optional VGA Y-cable, to the
Computer (in) socket of your projector.
2Connect the VGA cable supplied (1a) between the computer and the VGA Y connector
marked ‘Computer’(4b).
3Connect the VGA Y connector marked ‘Monitor’(4c) to the VGA cable (5) of the monitor.
4Switch on your Computer.
5Switch on the projector.
6Select ‘Computer’input, using the Source button.
–‘Computer’appears on the screen.
7Press Menu.
–The...

>
1Connect the Video (out) socket of a VCR, Laser Disc player, video camera or TV to the
Video (in) socket of the projector.
For this, use the video/audio connection cable (1a) supplied.
2Connect the Audio out L/R sockets of the VCR, Laser Disc player, video camera or TV to
the Audio (in) L/R sockets of the projector.
For this, use the audio/video connection cable supplied (1b).
1Connect the S-Video (out) socket of a S-VHS video recorder, Laser Disc player, video
camera or TV to the S-Video (in) socket...

>
Pr, Y, Pb/Cr, Y, Cb
1Connect the Component in sockets of the projector to the appropriate output sockets of
your Component- or HDTV-video equipment (Pr, Y, Pb / Cr, Y, Cb).
For this, use the audio/video connection cable supplied(1).
2If required you can connect the Audio out L/R sockets of the Component- or HDTV-video
equipment to the Audio (in) L/R sockets of the projector.
For this, use an optional audio connection cable (2).
–Audio information from the Component- or HDTV-video equipment will be...

<
RGBS
1Connect an optional Scar t/RCA Component Video adapter (1)to the Scar t connector of
your Component- or HDTV-video equipment 
2Connect the Component in sockets of the projector to the R, G and B outputs of the
adapter.
For this, use the audio/video connection cable supplied (2).
3Connect the Video input of the projector to the Y output of the adapter.
For this, use an optional audio/video connection cable (3).
4Select ‘RGBS’input by pressing the Source button.
–‘RGBS’appears on the screen.
5If...

<
1Press the Standby button to switch on the projector.
–The Standby indicator lights up orange.
–When the projection lamp is on, the Standby indicator lights up green and the star t-up
screen (when enabled) appears for several seconds.
2 Select the required source (Computer, Component, RGBS, S-Video, Video) by pressing the
Source button.
When only one input source is connected, this source will automatically be selected (Auto Source).
When more input sources are connected, the source with the highest...

>
All video and data adjustments and settings (except A/V Mute) are done via On Screen Displays
and with help of Menu, OK and Cursor Control on the projector or the remote control.
The projector is set to standard settings at the factor y. However, you can adjust these settings to
suit your own preferences.
The projector menu screens allow you to adjust the various projector settings (for both
Computer and Video). For explanation and operation see next pages.
COMPUTER MODE
Main menu Sub menu Setting...

GENERAL ADJUSTMENTS/SETTINGS
Main menu Sub menu Setting
AudioVolume Min Max
Bass Min Max
Treble Min Max
Mute Off On
SettingsLanguage
Eng.
Esp.
Deu.
Fra.
Por.
Ita.
Chi.
Keystone correction
Monitor out Off On
System information OK
Factor y reset OK
Key lock OK (3 sec.)
Star t-up screen Off On
For bSure2 Brilliance projectors onlyDefault, Off, Custom,
Load
Lamp counter OK (3 sec.)
Auto Standby Off 15 30 45 60 120
Auto Source Off On
Feedback Off OnMenu tree
Philips Multimedia Projector20English User guide...