Philips Bdl4221v User Manual

							
On Screen Display
Channel 
EditChoices to add or delete channels from available channels.
l     Press   enter Channel Edit sub-menu
l     In Channel selection, use  or  to choose the channel that 
you wish to add or delete.
l     Then, press  to next selection, use  or  to toggle 
between 
m     Activate (add)
m     Skip (delete)
l     Repeat the above two steps to add or delete other channels, or,
l     Press  to confirm and return to upper level sub-menu
l     Press  or   to adjacent sub-menu selections.
Channel 
Swap To swap channel numbers between two channels.So users can put 
preferred channels at front.
l     Users can use  to enter Manual Store sub-menu, 
l      or  to select between selections. 
l     Then,   to confirm.
Channel Swap sub-menu
From Choose a channel number to be swapped from.
l     Use  or  to select channel.
l      to confirm and return to upper level sub-menu.
To Choose a target channel number to be swapped to.
l     Use  or  to select channel.
l      to confirm and return to upper level sub-menu.
Exchange Execute channel swap.
l     Users can use  to execute the swapping move.
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/OSD/osddesc.htm (\
21 of 22)2005-11-07 12:54:53 PM 
						

							
On Screen Display
Name EditModify the channel name from a broadcaster give one to a user preferred \
one.
l     Users can use   to enter
l     Use  or  to select channel.
l     Press  to name input line. 
l     Use  or  to select from A to Z,  or  to adjacent 
alphabet.
l     Press  to confirm and return to upper level sub-menu.
Channel 
Sort Sort channel name sequence in alphabetical order, from A to Z. Those 
channels without a name will be placed at the end of the sequence 
according to their frequencies, from small to large.
l     Users can use  to enter.
l     Press  to start sorting.
RETURN TO TOP OF THE PAGE
 
 
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/OSD/osddesc.htm (\
22 of 22)2005-11-07 12:54:53 PM 
						

							
Remote Control
Remote Control
On Screen Display • Using Your Remote Control
Using Your Remote Control
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/OSD/tv_control.htm\
 (1 of 5)2005-11-07 12:54:56 PM 
						

							
Remote Control
 
1
AV source: 
l     To select TV/video source in TV and also PIP window.
l     If TV is in Standby mode, press this button to switch to ON.
2
Mode: 
Screen aspect ratio, switching between 4:3, 16: 9, wide screen, and supe\
r 
wide.
3
Numerical keys: 
l     For direct access to programs.
l     If TV is in Standby mode, press any number will switch the TV to ON 
mode.
4
Previous program: 
Jump to previous TV channel you are viewing.
5
Menu: 
To turn on or off the On-screen-display (OSD) menu
6
l     Move the cursor up in OS
l     Channel up
7
l     Move the cursor left in OSD
l     Adjust volume down
8
Switching between PC and TV mode.
9
Closed Caption:
Functions in North America and Asia Pacific models only.
10
l     Move the cursor down in OSD
l     Channel down
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/OSD/tv_control.htm\
 (2 of 5)2005-11-07 12:54:56 PM 
						

							
Remote Control
11
l     Move the cursor right in OSD
l     Adjust volume up
12
Confirm the chosen OSD function
13
Freeze: 
Freeze the screen in video mode or PIP. 
14
Status: 
Display channel number, video/PC mode, and sound mode information.
15
 Sound select: 
l     To switch between mono and stereo, or to choose between Dual I 
and Dual II for bilingual transmissions.
l     For TV sets fitted with NICAM, depends on transmission, you can 
switch between NICAM stereo and Mono, or between NICAM Dual I, 
NICAM Dual II, and Mono.
16
PIP Size: 
Adjusts Picture-in-Picture (PIP) window size between small, medium, la\
rge, 
picture-by-picture (PBP or split screen), and off.
17
PIP position: 
Changing PIP window’s location on the screen between upper right, low\
er 
right, lower left, and upper left.
18
Mute: 
Disables audio: To enable audio, press the button again.
19
Sleep Timer: 
Selects a period of time and the unit will switch off automatically.
20
Standby: 
Sets the TV to standby mode temporary.
27
Smart Sound: 
Chooses audio effects between Music, Theater, News, and Personal.
28
Smart Picture:
Choose picture settings between Sports, Movie, Weak signal, Night, 
Multimedia, and Personal.  
The following buttons are using in Teletext mode only, which are availab\
le in Europe and some 
of the Asia Pacific TV systems.
21
Teletext Enlarge: 
Enlarge teletext context to two times larger.
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/OSD/tv_control.htm\
 (3 of 5)2005-11-07 12:54:56 PM 
						

							
Remote Control
22Teletext Mix:
Teletext background become transparent, content mixes with images.
23
Teletext On/Off:
Teletext ON or OFF.
24
Teletext Hold:
Freezes the teletext page.
25
Main Index: 
Press the button to return to the main index.
26
Teletext Reveal/Conceal:
To view the concealed text information (e.g. question/answer, quiz, etc\
.) 
send by the teletext provider. Press the button can toggle between conce\
al 
and reveal mode.
These four color buttons allow you to access the item or the page indica\
ted 
by corresponding color in teletext.
 
Warning: If you are going to control the monitor TV via RS232 interface, to avoid\
 conflict, you 
need to disable the remote control first. You can enter the OSD menu, se\
lect Install, 
remote control to achieve so. After remote control is disabled, you can \
use buttons on 
the unit to enter OSD and enable it, or enable remote control via RS232 \
command.
RETURN TO TOP OF THE PAGE
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/OSD/tv_control.htm\
 (4 of 5)2005-11-07 12:54:56 PM 
						

							
Customer Care and Warranty
Customer Care & Warranty
PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR 
WARRANTY COVERAGE
WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • 
Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • 
Switzerland • Spain • United Kingdom 
EASTERN EUROPE: Czech Republic • Hungary • Poland • Russia • Slovakia • Slovenia • 
Turkey
LATIN AMERICA: Antilles • Argentina • Brasil • Chile • Colombia • Mexico • Paraguay • 
Peru • Uruguay • Venezuela
NORTH AMERICA: Canada • USA
PACIFIC: Australia • New Zealand
ASIA: Bangladesh • China • Hong Kong • India • Indonesia • Japan • Korea • Malaysia • 
Pakistan • Philippines • Singapore • Taiwan • Thailand
AFRICA: Morocco • South Africa
MIDDLE EAST: Dubai • Egypt
  
file:///D|/My%20Documents/dfu/BDL4221V/english/warranty/warranty.htm2005\
-11-07 12:54:59 PM 
						

							
Download and Print
Download and Print
Installing your LCD monitor driver • Download and Printing Instructions • Installing FPadjust 
Program 
Installing Your LCD monitor driver
System requirements: 
l     
PC running Windows® 95, Windows® 98, Windows® 2000 , Windows®\
 Me, Windows® XP 
or later
l     Find your driver .inf/.icm/.cat at : /PC/drivers/
Read the Readme.txt file before installing. 
This page provides an option to read the manual in .pdf format. PDF file\
s can be downloaded into 
your hard disk, then viewed and printed with Acrobat Reader or through y\
our browser. 
If you do not have Adobe¨ Acrobat Reader installed, click on the link\
 to install the application. 
Adobe® Acrobat Reader for PC / Adobe® Acrobat Reader for Mac.
 
Download instructions:
To download the file:
1. Click-and-hold your mouse over the icon below. (Win95/98/2000/Me/XP \
users right-click)
DownloadBDL4221V.pdf
2. From the menu that appears, choose Save Link As..., Save Target As\
... or Download Link to 
Disk.
file:///D|/My%20Documents/dfu/BDL4221V/english/download/download.htm (1\
 of 3)2005-11-07 12:55:01 PM 
						

							
Download and Print
3. Choose where you would like to save the file; click Save (if promp\
ted to save as either text or 
source, choose source).
 
Printing instructions:
To print the manual:
1. With the manual file open, follow your printers instructions and pri\
nt the pages you need.
 
RETURN TO TOP OF THE PAGE
Installing FPadjust Program 
The FP Adjust program generates alignment patterns which will help you a\
djust monitor settings 
such as CONTRAST, BRIGHTNESS, HORIZONTAL & VERTICAL POSITION, PHASE and \
CLOCK.
 
System requirements: 
l     
PC running Windows® 95, Windows® 98, Windows® 2000, Windows®\
 Me, Windows® XP 
or later
 
To install FPadjust Program:
l     
Click on the link or icon to install FPadjustment Program.
or
l     
Click-and-hold your mouse over the icon. (Win95/98/2000/Me/XP users rig\
ht-click)
file:///D|/My%20Documents/dfu/BDL4221V/english/download/download.htm (2\
 of 3)2005-11-07 12:55:01 PM 
						

							
Download and Print
Download
FP_setup04.exe 
l     
From the menu that appears, choose Save Link As..., Save Target As...\
 or Download Link 
to Disk.
l     Choose where you would like to save the file; click Save (if prompted\
 to save as either text 
or source, choose source).
l     Exit your browser and install the FPadjust Program.
 
Read the FP_Readme04.txt file before installing.
RETURN TO TOP OF THE PAGE
 
file:///D|/My%20Documents/dfu/BDL4221V/english/download/download.htm (3\
 of 3)2005-11-07 12:55:01 PM