Philips Bdl4221v User Manual

 
3.3.3.2 AUTO ADJUST 
Command: AA 
Function: Automatically adjust the picture’s geometry (horizontal and vertical 
position), phase, and pixel clock of PC analog input. 
Data Range: 
 No data is required for this command. 
 This command works only when the input source is PC analog. 
  
Model
Source PAL NTSC AP CHINA 
PC ANALOG • • • • 
PC DIGITAL 
(DVI)     
HDCP     
TV TUNER     
COMPOSITE     
S VIDEO     
EXT     
HDTV     
 
 
 
 
3.3.3.3 COLOR SETTING  
Command: CO 
Function: Change the color...

 
Function: Control the color level of tuner/ Ext/ CVBS/ S-video & DTV input. 
Data Range: 
 [00h] to [CEh] 
 
 Once this command is executed, the smart picture setting is switched to \
“PERSONAL” automatically and the brightness/ contrast/ color/ sharpness 
of the “PERSONAL” smart picture setting will be set to the values \
of the 
current setting. 
  
Model
Source PAL NTSC AP CHINA 
PC ANALOG     
PC DIGITAL 
(DVI)     
HDCP • • • • 
TV TUNER • • • • 
COMPOSITE • • • • 
S VIDEO • • • • 
EXT • • • •...

 
TV TUNER • • • • 
COMPOSITE • • • • 
S VIDEO • • • • 
EXT • • • • 
HDTV • • • • 
 
 
 
  
 
3.3.3.6 PIP VIDEO SOURCE 
Command: PV 
Function: Change the video source of PIP. 
Data Range: 
 For PAL / VIDEO / BASIC models: 
 
 [00h] – Tuner 
 [01h] – Composite 
 [02h] – S-video  
 [03h] – Ext  
 
  
Model
Source PAL NTSC AP CHINA 
TV TUNER • • • • 
COMPOSITE • • • • 
S VIDEO • • • • 
EXT • • • • 
 
 
 
  
 
2838   100   05424
 
 
 
[ NAME ] 
                      Philips 
 21 14023
 

 
3.3.3.7 CHANNEL SELECTION 
Command: CH 
Function: Output the selected channel. 
Data Range: 
 For PAL, AP, and CHINA models: 
 [01h] to [64h] – channel number, from 1 to 100 
 
 For NTSC model: 
 [01h] to [45h] – channel number, from 1 to 69 in air broadcast 
 [01h] to [7Dh] – channel number, from 1 to 125 in cable transmission \
  
 Even if the video source is not TV TUNER, the selected channel is output 
but the video source will not automatically switch to TV TUNER. 
  
Model
Source PAL NTSC AP...

 
  
 
 
3.3.4.2 VOLUME 
Command: VO 
Function: Control the volume of the monitor. 
Data Range: 
 [00h] to [64h] – volume level 
  
Model
Source PAL NTSC AP CHINA 
PC ANALOG • • • • 
PC DIGITAL 
(DVI) • • • • 
HDCP • • • • 
TV TUNER • • • • 
COMPOSITE • • • • 
S VIDEO • • • • 
EXT • • • • 
HDTV • • • • 
 
 
 
3.3.4.3 MUTE 
Command: MU 
Function: Mute on/off. 
Data Range: 
 [00h] – Mute OFF  
 [01h] – Mute ON  
 “Mute ON” means the target monitor has no sound output. 
  
Model
Source PAL NTSC AP CHINA...

Connecting to Your PC, TV Antenna, DVD/VCR etc.
Connecting to Your PC, TV Antenna, DVD/VCR etc. 
Product Description • Accessory Pack • Connecting to Your PC, TV Antenna, DVD/VCR etc. • Getting Started • 
Optimizing Performance
Accessory Pack
Unpack all the parts 
Power cableRemote control & batteries
   
DVI-D cable VGA signal cable
   
 
E-DFU pack  
 
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/INSTALL/CONNECT.HT\
M (1 of 9)2005-11-07 12:55:26 PM 

Connecting to Your PC, TV Antenna, DVD/VCR etc.
Base Screw pack 
2x10 W Detachable Speakers   
 
RETURN TO TOP OF THE PAGE 
Setting up and connecting your monitor/TV
CAUTION: Ensure that the power to the monitor/TV is switched off before the 
installation.
- Connecting the monitor/TV
l     Connect the cables to the rear of your monitor/TV according to the numbe\
rs:
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/INSTALL/CONNECT.HT\
M (2 of 9)2005-11-07 12:55:26 PM 

Connecting to Your PC, TV Antenna, DVD/VCR etc.
TV model
 
RETURN TO TOP OF THE PAGE 
- Connect to PC 
l     Connect the cables to the back of your computer by following step 1~5.
l     If your monitor displays the computer image the installation has been co\
mpleted successfully.
l     If installation was not successful, see the Troubleshooting section.
l     For installation of the monitor driver for Microsoft Windows®, see th\
e Monitor Driver Installation section 
(Getting Started)....

Connecting to Your PC, TV Antenna, DVD/VCR etc.
RETURN TO TOP OF THE PAGE 
- Connect to DVD/VCD/VCRConnect to DVD/VCR/VCD through S-VIDEO
l     Connect to DVD/VCR/VCD through S-VIDEO
 
l     Connect to DVD/VCR /VCD through SCART (for Europe only)
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/INSTALL/CONNECT.HT\
M (4 of 9)2005-11-07 12:55:26 PM 

Connecting to Your PC, TV Antenna, DVD/VCR etc.
 
 
l     Connect to DVD/VCR /VCD through composite video (CVBS)
 
 
l     Connect to DVD/VCR /VCD through component video (YPbPr)
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/INSTALL/CONNECT.HT\
M (5 of 9)2005-11-07 12:55:26 PM