Philips 58pfl9956t User Manual

							6.4Picture and sound
No  picture•   Check   if  the   antenna  is  connected   properly.•   Check   if  the   correct   device   is  selected  and  connected   properly.
•   Check   the   contrast   or  brightness   setting  in  h > Setup > TVsettings > Picture > Contrast  or Brightness.
The   picture  is   poor•   Bad   weather  can   influence   the   picture   quality.•   Check   if  the   antenna  is  connected   properly.•   Non -earthed   audio   devices,   neon   lights,   high   buildings   ormountains   can   influence   the   picture   quality.   Try  to  improve   thepicture   by   changing   the   position   of   the   antenna  or  placing  devicesaway  from  the   TV.
•   Check   that  the   correct   TV   system   is  chosen  in   the   Manualinstallation  menu.•   If   only  a  certain  channel  is  poor,  try   to  fine  tune  this   channelwith   the   Fine   tune  menu.Read Help > Setup > Channels > Manual  installation  -  Analogue.
The   picture  has  poor  colour
•   Check   the   colour  settings   in  h > Setup > TV  settings. Or
press  r  OPTIONS  to  select  a Smart   picture  setting.
Picture  delay  when  a  game  console   is   connected
•   To   prevent   picture   delay,  press  r  OPTIONS,  select Smartpicture > Game.
The   TV  does   not   remember   my  settings   when  I   switch   it  backon
•   Check   whether   the   TV   is  set   to  the  Home  location.   Press  h> Setup > TV  settings > Preferences > Location.
The   picture  does   not   fit   the  screen
•   Press  r  OPTIONS, Picture  format  and  select Auto   fill.
The   picture  position   on   screen   is   not   correct
•   To   correct   a  shifted   picture,   press  r  OPTIONS  and  selectPicture  shift.  Use  the   navigation   keys   to  adjust   the   pictureposition.  Press  OK  to  stop   Picture   shift.
•   If   distorted  screen  edges   are   visible,  press  h > Setup > TVsettings > Picture > Screen  edges  and  use  the   slider   bar   toenlarge   the   picture   slightly.
There   is   a  picture  but  no   sound•   Check   the   volume   is  not   set   to  0.
•   Check   the   sound   has   not   been  muted  with  m.•   Check   that  all   cables   are   connected   properly.•   If   no   sound   signal  is  detected,  the   TV   automatically  switches  offsound.   This   is  proper   operation   and  is  not   a  malfunction.
The   sound   is   poor
•   Try  any   Smart  sound   setting,   press  r  OPTIONS, Smartsound.•   Check   that  the   sound   is  set   to  Stereo.
The   sound   comes  from  one  speaker   only
•   Check   the   Balance  setting.   Press  h > Setup > TV  settings >Sound > Balance.  Use  the   slider   bar   to  set   the   balance.
Sound  delay•   If   there  is  an   audio   to  video   sync   mismatch   when   sound   comesfrom  a  Home  Theatre  System,  an   audio   sync   delay   needs  to  beset   up.  Read  more   about   Audio  to  Video  sync   in  Help > Setup> Devices > Audio   to  Video   sync.
Troubleshooting   /   Picture   and  sound71
 
						

							6.5Devices
HDMI  connections•   The  HDMI -HDCP  procedure  might  take  a  few  seconds   beforethe   picture   from  a  device   appears.•   If   the   TV   does  not   recognise   the   device   and  there  is  nopicture,   try   switching   from  one  device   to  another  and  back   againto  restart  the   HDCP  procedure.   Or   switch   the   device   off   andback   on   again.
•   If   sound   interruptions   occur  persistently,   see  the   user  manual   ofthe   device   to  check   the   output  settings.  If   that  does  not   help,connect   an   additional  audio   cable.•   If   a  DVI  to  HDMI   adaptor   is  used,   check   that  an   additionalaudio   connection   is  in   place   to  complete   the   DVI  connection.
EasyLink  HDMI-CEC•   Check   if  the   connected   device   supports  the   HDMI -CECstandard   and  is  properly  set   up.  Read  the   user  manual   that  comeswith   the   device.•   Check   if  the   HDMI   cable   is  properly  connected.
•   Check   if  EasyLink   on   the   TV   and  device   is  switched   on.•   Make   sure  that  the   System   audio   control   in   your   HDMI -CECaudio   devices  is  properly  set   up.  Read  the   user  manual   thatcomes   with   your   audio   device.
PC  display•   The  refresh   rate  of   a  PC  connected   to  the   TV   with   VGA  orDVI  to  HDMI   adapter  should   set   to  60Hz.•   Check   that  the   correct   resolution   mode  is  selected  on   yourPC.   See  the   list   in  Help > Specifications > Display   resolutions.
72Troubleshooting   /   Devices
 
						

							6.6Videos, photos and music
The   files  on   my  USB  device   are  not   shown•   Set   your   device   (camera)  to  ‘Mass  Storage  Class’  compliant.•   The  USB   device   may   need  specific   driver   software.Unfortunately,   this   software   cannot   be  downloaded   to  your   TV.
•   Not   all   audio   and  picture   files   are   supported.  See  the   list   inHelp > Specifications > Multimedia.
Files  from  a  USB  device   do  not   play   back  smoothly•   The  transfer  performance   of   the   USB   device   limits  the   transferrate.
The   files  on   my  PC  are  not   shown•   To   look   for   files   on   your   home   network   with   Browse   PC,your   PC  media   server  software   should   be  set   up  to  share  thefiles   with   the   TV.   See  the   list   of   compatible  Media   serversoftware   in  Help > Specifications > Multimedia.
Troubleshooting   /   Videos,  photos  and  music73
 
						

							6.7Network
Wireless   network   not   found  or   distorted•   Microwave  ovens,   Dect   phones  or  other   WiFi  11b  devices  inyour   neighbourhood   might  disturb   the   wireless  network.•   Make   sure  that  the   firewalls  in   your   network   allow   access   tothe   TV   wireless  connection.
•   If   the   wireless  network   does  not   work   properly  in   your   home,try   the   wired  network   installation.   Read Help > Setup >Network > Wired  installation.
Net   TV  does   not   work•   If   the   connection   to  the   router   is  OK,  check   the   routerconnection   to  the   Internet.
Browse  PC  or   Net   TV  work   slow•   Look  in   your   wireless  routers   user  manual   for   information  onindoor   range,  transfer  rate  and  other   factors   of   signal  quality.•   You   need  a  high -speed  (broadband)   Internet  connection   foryour   router.
74Troubleshooting   /   Network
 
						

							7
7.1
Specifications
Software
Software version
To   view   the   current  TV   software   version,  press  h > Setup >Software   settings  and  press  OK.  Select  Current  software  infoand  read Version:.
Open source software
This   television  contains open   source   software.  Philips  herebyoffers  to  deliver,   upon   request,   a  copy  of   the   completecorresponding   source   code   for   the   copyrighted   open   sourcesoftware   packages   used   in   this   product  for   which  such  offer   isrequested   by   the   respective  licences.
This   offer   is  valid  up  to  three  years   after   product  purchase   toanyone  in   receipt   of   this   information.   To   obtain   the   source   code,please  contact  [email protected]   you   prefer   not   to  use  email   or  if  you   do   not   receive   aconfirmation   receipt   within   a  week  after   mailing   to  this   emailaddress,   please  write   in   English  to . . .
Open  Source   Team,   Philips  ElectronicsIntellectual  Property   and  StandardsP.O.  Box   2205600  AE   EindhovenThe   Netherlands
Read  the   Open  Source  Licences  in  Help > Getting   started >Open  Source   Licences.
Specifications  /   Software75
 
						

							7.2Environmental
EU Energy Label
EU  Energy  labelThe  European  Energy  Label  informs   you   on   the   energy  efficiencyclass  of   this   product.   The  greener   the   energy  efficiency   class  ofthis   product  is,   the   lower   the   energy  it   consumes.
On  the   label,  you   can   find  the   energy  efficiency   class,   the   averagepower   consumption  of   this   product  in   use  and  the   averageenergy  consumption  for   1   year.   You   can   also  find  the   powerconsumption  values   for   this   product  on   the   Philips  website   foryour   country  atwww.philips.com/TV
Energy saving
76Specifications  /   Environmental
 
						

							Light  sensorTo   save   energy,   the   built -in   ambient   light   sensor  lowers   thebrightness   of   the   TV   screen  when   the   surrounding  light   darkens.
Energy  savingThe  energy  saving  Smart  picture   setting,   combines  several   TVsettings   that  result   in   saving  energy.
Low  standby  powerThe  class-leading   and  highly  advanced   power   circuitry  brings  downthe   power   consumption  of   the   TV   to  an   extremely   low  level,without   losing  out   on   the   constant  Standby   functionality.
Power  managementThe  advanced   power   management  of   this   TV   ensures  the   mostefficient   use  of   energy.   You   can   check   how  your   personal  TVsettings,  the   level  of   brightness   in   current  onscreen   pictures,   andthe   surrounding  light   conditions   determine   the   relative  powerconsumption.
To   check   the   relative   power   consumption,   press  h > Setup
and  press  W.  Select  Watch  demos > Active   control  and  pressOK.  Select   a  Smart  setting  to  check   the   corresponding   values.
End of use
Disposal  of   your  old   product   and  batteriesYour   product  is  designed  and  manufactured   with   high   qualitymaterials   and  components,  which  can   be recycled  and  reused.
When   this   crossed-out   wheeled  bin  symbol   is  attached   to  aproduct  it   means  that  the   product  is  covered  by   the   EuropeanDirective  2002/96/EC.
Please  inform   yourself   about   the   local  separate  collection  systemfor   electrical  and  electronic   products.
Please  act   according  to  your   local  rules  and  do   not   dispose   ofyour   old   products   with   your   normal  household  waste.   Correctdisposal  of   your   old   product  helps   to  prevent   potential  negativeconsequences   for   the   environment  and  human   health.
Your   product  contains  batteries   covered  by   the   EuropeanDirective  2006/66/EC,   which  cannot   be  disposed   with   normalhousehold  waste.
Please  find  out   for   yourself   about   the   local  rules  on   separatecollection  of   batteries   because   correct   disposal  will   help   toprevent   negative  consequences   for   the   environment  and  humanhealth.
Specifications  /   Environmental77
 
						

							7.3Power and reception
Power
Product  specifications  are   subject  to  change  without   notice.   Formore   specification  details   of   this   product,   seewww.philips.com/support.
Power•   Mains   power   :  AC   220 -240V  +/ -10%•   Ambient  temperature   :  5°C   to  35°C•   Standby   power   consumption  :  <  0.15W•   Power   saving  features  :  Light  sensor,  Eco   mode,   Picture   mute(for   radio),  Auto   switch -off   timer,   Eco   settings   menu.
The  power   rating   stated   on   the   product  typeplate   is  the   powerconsumption  for   this   product  during  normal  household  use  (IEC62087   Ed.2).  The  maximum   power   rating,   stated   betweenbrackets,  is  used   for   electrical  safety  (IEC   60065   Ed.  7.2).
Reception
•   Aerial   input  :  75  ohm   coaxial   (IEC75)•   Tuner   bands  :  Hyperband,   S -Channel,  UHF,   VHF•   DVB  :  DVB-T   (terrestrial,   antenna)  COFDM   2K/8K,  DVB-T2  :only  for   TV   types  .  .  .  T/12,   DVB-C   (cable)   QAM
•   Analogue   video   playback  :  NTSC,   SECAM,   PAL•   Digital   video   playback  :  MPEG2  SD/HD   (ISO/IEC   13818 -2),MPEG4  SD/HD   (ISO/IEC   14496 -10)•   Digital   audio   playback  (ISO/IEC   13818 -3)•   See  selected  countries   on   the   TV   type   plate
78Specifications  /   Power   and  reception
 
						

							7.4Display and sound
Display   /   Picture•   Diagonal  size  :-  58PFL9956  :  147   cm  /   58•   3D   Max•   Picture   enhancement  :-  Perfect  Pixel  HD   Engine-  Wide  Colour  Gamut-  Scanning  backlight
•   Display   type   :  LED   Pro   Full  HD,  LED   backlight•   Panel  resolution   :  2560  x   1080p•   Colour  processing  :  2250  trillion  colours  17bit  RGB•   Brightness   :  500   cd/m2•   Dynamic   contrast   :-  10.000.000   :  1•   Response   time  (typical)   :  0.5  (BEW   equiv.)   ms
Sound•   Output   power   (RMS)   :  40W   @30%THD•   Dolby  Digital,  Dolby  Digital   Plus,   Dolby  Pulse   -  Dolby  and  thedouble -D  symbol   are   registered  trademarks   of   DolbyLaboratories.
Specifications  /   Display   and  sound79
 
						

							7.5Display resolutions
Video   formatsResolution   —  Refresh   rate•   480i   -  60  Hz•   480p   -  60  Hz•   576i   -  50  Hz•   576p   -  50  Hz•   720p   -  50  Hz,  60  Hz•   1080i  -  50  Hz,  60  Hz•   1080p  -  24  Hz,  25  Hz,  30  Hz•   1080p  -  50  Hz,  60  Hz
Computer   formatsResolutions   (amongst  others)•   640   x   480p   —  60  Hz•   800   x   600p   —  60  Hz•   1024  x   768p   —  60  Hz•   1280  x   768p   —  60  Hz•   1360  x   765p   —  60  Hz•   1360  x   768p   —  60  Hz•   1280  x   1024p  —  60  Hz  •   1920  x   1080i  —  60  Hz•   1920  x   1080p  —  60  Hz
80Specifications  /   Display   resolutions