Philips 58pfl9956t User Manual

If   the   list   with   the   content   of   the   camera  does  not   appearautomatically,   your   camera  might  need  to  be  set   to  transfer  itscontent   with   PTP   (Picture   Transfer   Protocol).  Read  the   usermanual   of   the   digital   photo   camera.
Camcorder
Connect  a  camcorder   to  the   side  or  back   of   the   TV.   You   canuse  an   HDMI,  YPbPr   or  SCART  connection.  If   your   camcorderonly  has   Video  (CVBS)   and  Audio  L/R  output,   use  a Video   AudioL/R...

Keyboard and mouse
USB  keyboardYou   can   connect   a USB   keyboard  to  enter  text   on   your   TV.With   a  keyboard  connected,  you   can   type   in   a  new   channelname   or  type   in   what   you   are   looking   for   in   the   YouTube   appin   Net  TV.
InstallSwitch   the   TV   on   and  connect   the   USB   keyboard  to  one  of   theUSB   connections   on   the   side  of   the   TV.   When   the   TV   detectsthe   keyboard,   you   can   select  your   keyboard  lay -out   and...

For  use  with   Net  TV   .  .  .- Tab and Shift  Tab  =  Next   and  Previous- Home  =  scroll   to  the   top   of   the   page- End  =  scroll   to  the   bottom  of   the   page- Page  Up  =  jump  one  page  up- Page  Down  =  jump  one  page  down-  +  =  zoom   in   one  step-  -  =  zoom   out   one  step-  *   =  fit  to  width
USB  mouseYou   can   connect   a USB   mouse  to  navigate   pages  on   the   Internet.On  an   Internet  page,   you   can   select  and  click  on   links...

Use  a  DVI  to  HDMI   adapter  to  connect   the   PC  to  HDMI   and  anaudio   L/R  cable   to  connect   the   Audio  L/R  to  the   back   of   the   TV.
Ideal  TV  settingSet   the   TV   picture   format   to  Unscaled   for   the   sharpest   picture
quality.   While   watching   TV,   press  t  ADJUST,  select Pictureformat  and  select Unscaled.
For  a  list   of   supported   resolutions   see Help > Specifications >Display   resolutions.
64Connections  /   Connect  more   devices
 

5.5Network
Wireless
To   set   up  the   wireless  network   connection,  read Help > Setup >Network.
Wired
To   set   up  the  wired  network   connection,  read Help > Setup >Network
Connect  the   router   to  the   TV   with   a  network   cable.  To   fulfilEMC   regulations,  use  a  shielded  FTP  Cat.   5E  Ethernet   cable.
Connections  /   Network65
 

5.6SD card
Memory size
To   store   videos   downloaded   from  a  Video  store   on   Net  TV,   youneed  to  insert   an   SD  memory  card   into  the   TV   SD  card   slot.Once  formatted,  leave  the   card   permanently  in   the   slot.
SD  memory  card  sizeUse  a  SD  HC  (High   Capacity)   memory  card   with   at  least  4GB  ofstorage  capacity.For  high -definition  (HD)   video,  use  an   SD  card   with   at  least  8GBof   storage  capacity.   Use  a  speed  class  2   card   or...

5.7Common interface CAM
CAM
Scrambled  digital   TV   channels   can   be  decoded   with   a  ConditionalAccess   Module  (CAM).  Digital   TV   service   operators   provide  theCAM  when   you   subscribe  to  their   services.  Contact   a  digital   TVservice   operator   for   more   information  and  to  see  terms   &conditions.
Insert   a  CAMSwitch   off   the   TV   before   inserting   a  CAM.Look  on   the   CAM   for   the   correct   method  of   insertion.  Incorrectinsertion   can...

6
6.1
Troubleshooting
Contact information
If   the   advice   and  suggestions  in   Troubleshooting   do   not   helpresolve   the   problem,  try   switching   the   TV   off   and  back   on   again.
WarningIf   your   TV   breaks  down, NEVER  try   to  repair   the   TV   yourself.
Consumer  CareIf   the   TV   problem  is  not   solved   you   can   call  the   PhilipsConsumer   Care  hotline   in   your   country.   Look  up  the   TV   modeland  serial  number  before   you   call.  Find  the...

6.2TV and remote control
The   TV  does   not   switch   on•   Switch   the   TV   off   and  on   again  with   the   switch   on   the   bottomof   the   TV.•   Check   the   power   cable   connection.•   Try  using   the   keys   on   the   TV   to  switch   on.
The   TV  does   not   switch   on   from  standby•   Check   that  the   batteries   of   the   remote   control   are   not   emptyor  weak.  Check   their   +  /   -  orientation.•   Try  using   the   keys   on   the   TV   to  switch...

6.3TV channels
Some   TV  channels   are  gone
•   Check   if  the   correct   list   is  selected  in   the   Channel   list.  Press  ¬
FIND  to  open   the   Channel   list,  then  press  r  OPTIONS andselect  the   list   you   need  with  Select  list.
•   A   channel  could   be  hidden   in   the   Channel   list.  Read  moreabout   Channel   list   in  Help > Basics > Watch  TV > Channel  list.
No  digital   channel  found  during  installation•   Check   if  the   TV   supports  DVB-T   or  DVB-C...