Philips 50pf9631d User Manual

							This menu contains items that can set or adjust various special
TV functions and that will typically be accessed only
occasionally.
Select your location
This allows you to select the location of your TV.
If you choose for Shopit will result in fixed settings of
picture, sound and ambilight.
The location Homewill give full flexibility to change any
predefined settings for picture, sound and ambilight.
Select Teletext  2.5
Some broadcasters offer the opportunity to see more
colours, other background colours and nicer pictures in the
teletext pages.

						

							Select a Decoder channel number
This allows you to select the peripheral equipment you have
connected to the audio and video connectors.
1. Select Connections.
2. Press the cursor right.
3. Select the input to which the peripheral equipment is
connected.
>When you select 
EXT1,EXT2,EXT3,HDMI 1,
HDMI 2,Sideor DIGITAL AUDIO  IN,a list appears
which allows you to identify which type of peripheral
equipment is attached to this input.
4. Press the cursor right again to enter the list of types of
peripherals connected to the selected input.
5. Select the peripheral equipment with the cursor up/down.
Digital Audio  In
If a peripheral equipment has a digital audio output, you can
connect this with a single cable to the TV’s DIGITAL
AUDIO INconnector.
In the Connections menu, assign the DIGITAL AUDIO  INto the corresponding external input to which your
peripheral equipment is connected.
In addition to accepting audio input via Digital Audio In, the
TV can output encoded Dolby Digital audio via the
DIGITAL AUDIO  OUTconnector to an external amplifier
or receiver. If your amplifier or receiver has a matching
connector for Digital Audio In, you can connect it with a
single cable to the TVs 
DIGITAL AUDIO  OUT.
See To make video and audio connections, Connect a Home
Cinema amplifier, p. 51.
Select your connectionsEN
32This allows you to define one or more channel numbers as
decoder channel numbers when a decoder or a descrambler is
connected to 
EXT1or EXT2.
1. Select the channel number under which you have stored the
programme that comes from your decoder or descrambler.
2. Select Status.
3. Select the input used to connect your decoder:None,
EXT1or EXT2.

						

							How to upgrade the TV software 
Reset the Factory settingsEN
33 This allows you to upgrade your TV software using a USB device.
USB device upgrade
It is possible to initiate an upgrade procedure from a USB
device before you start up the TV. The memory device must
be filled with the appropriate upgrade image (and structure)
which can be found on the www. philips.com/support website.
How to upload a new software version on your memory
device, see Annex 1, Philips TV software upgrade with portable
memory, p. 57.
Automatic software announcement (if present)
When you switch on your TV a message may appear that a
new software upgrade is available.

						

							EN
34
This allows you to select up to four favourite channels lists with
your preferred TV channels and radio stations. For example, each
member of your family can create his/her own favourite list.
In addition to the favourite channel lists you may also select a list
with only digital TV channels or a list with only the radio
channels or a list with only the analogue channels.
1. Press the 
FAVkey (or the OKkey).
>The last selected channel list appears.
2. Use the cursor up/down to select a channel.
3. Press the 
OKkey to display the selected channel.
1. Press the 
FAVkey.
>The last selected channel list appears.
2. Press the red colour key to bring up the list of possible
favourite channel lists.
3. Use the cursor up/down to select a list.
4. Press the 
OKkey.
5. Press the 
FAVkey again to exit.
1. Press the 
FAVkey.
>The last selected channel list appears.
2. Press the red colour key.
>A list with all possible favourite channel lists appears.
3. Use the cursor up/down to select a Favourites (1 to 4)
channel list.
4. Press the 
OKkey.
5. Press the green colour key to enter the Edit mode.
>The selected Favourite list will bring up a full channel list.
6. Use the cursor up/down to select a channel.
7. Press the OKkey to check or uncheck the highlighted
channel and to add it to or remove it from your selected
favourite list.
8a.The modified favourite channel list appears.
With the 
–P+key you will be able to browse through
the TV channels of the selected list.
8b. Press the red colour key to remove the channel list.
Create your favourite list
Note:when this key is pressed the first time after you have
finished the installation, it will bring up the full channel list. In
other situations it will bring up the last selected channel list.
Note:with the digit keys you can still select channels which
are not marked as favourite.
To select a channel from the displayed favourite list
To select another favourite channel list
To create a favourite list or to modify the list
Favourites 1 EXT1
EXT2HDMI
2 Digital channel 1 
3 Digital channel 2 
4 Radio channel 1 45 Data channel 1
Exit Leave edit 
Press the OK key to mark /
All channels All
TV channels Radio channels 
Analogue Favourites 1 Favourites 2 Favourites 3 3Favourites 4 
Change list 
 
All channels 
EXT1
EXT2
1 Analogue channel 1 2 Digital channel 1 
3 Digital channel 2 4 Radio channel 1 25 Data channel 1
Change list 
Tune to a channel by pressing OK. 
1 Analogue channel 1 
b
b
A
b
A
A
HDMI
unmark. Use -P+ for page up/down.
Use cursor up/down to select and 
OK to confirm. 
2524.3._en.qxd  22-03-2007  15:13  Pagina 34
 
						

							EPG (Electronic Programme Guide)  (only with Digital TV channels)
Create your favourite channels list  (Continued)EN
35 The Electronic Programme Guide shows you detailed
information about the current programme and also about the
next programme (only for TV programmes that provide EPG
information).
1. Press the akey.
>The EPG screen appears. Dependent on conditions it
may take some time to acquire EPG data.
>The EPG screen updates automatically if the EPG data is
acquired successfully. If not, the EPG screen remains
blank.
>Information about the selected programme appears.
Information about the selected programme appears. When the All channels list is displayed or selected you may filter
the list and select a list with only the TV channels or a list with
only the radio channels.
1. Press the 
FAVkey.
>The last selected channel list appears.
2. Press the cursor left.
3. Select the All channels list and press the cursor right.
4. Press the red colour key to filter.
5. Select your desired channels list.
6. Press the 
FAVkey again to exit.
>With the –P+key you will be able to browse through
the TV channels of the filtered list.
Note:these instructions may differ according to the type of
Electronic Programme Guide.
Note:the filtering will not be remembered after the TV is
switched off or set to standby.
To select only TV or only radio channels on the All
channels list
a
a
Tips:
- press the blue colour key on the remote control to view
more information (not currently displayed) about the
selected programme.
-to quit the display of detailed information, press the blue
colour key again.
2524.3._en.qxd  22-03-2007  15:13  Pagina 35
 
						

							2. Press the green colour key on the remote control to
watch/listen to the selected programme currently on air.
3. Press the red colour key to mark/unmark a reminder on
the selected programme. You can set up to a maximum of
10 reminders.
>The TV will wake up automatically or display a message
when the programme is about to start. Follow the
instructions on screen to watch the programme.
4. Press the yellow colour key to jump to the Nextor the
Previous dayor back to Today.
5. Press the 
MENU/BROWSEkey,while Programme Guide is
active, to activate the Programme Guide main menu.
°Use the cursor up/down to highlight and select a menu
item.
-Whats onallows you to browse through the
programme guide information of your preferred EPG
channels.
-Search by genreallows you to search for the
programmes according to a selected genre.
-Scheduled remindersallows you to view and change
the reminders you have set.
-Preferred EPG channelsare the channels from which
the EPG data is currently being  acquired. This menu
allows you to mark/unmark (up to 50) preferred EPG
channels.
-Acquire EPG dataallows you to update the
information for the preferred programme guide
channels. Follow the instructions on screen.
6. To quit the Electronic Programme Guide, press the akey
again.
EPG (Electronic Programme Guide) (Continued)EN
36
Tips:
-the EPG screen will not include TV channels which are
not in the Preferred channel list or which are uninstalled
(See Rearrange menu).
-new added channels (via reinstallation or installation) will
have to be marked in the preferred EPG channel list
before you can see EPG data.
Note:the reminder(s) will wake up your TV from
standby only if you switched off your TV with the B
key on your remote control.
Note:after the installation of your channels, by default
40 channels with available EPG data will automatically
be marked as preferred EPG channel.
Note:Acquisition of EPG data is done automatically
while watching TV.
a
a
Programme Guide    What’s on
12:00 South today
13:30 Working lunch
12:30 Brainteaser
12:00 This is BBC THREE
.........
InfoWhat’s on
Search by genre
Scheduled reminders
Preferred EPG chann..
Acquire EPG data
2524.3._en.qxd  22-03-2007  15:13  Pagina 36
 
						

							The Multimedia browser lets you display pictures or play audio
files stored on a USB device. The Multimedia browser
application is invoked from the main menu.
-Following file formats can be reproduced:
for pictures: JPEG
for audio: MP3, MP3 Pro, LPCM
-Only FAT/DOS-formatted memory devices are supported.
- Philips can not be held responsible if your USB device is not
supported.
To insert a USB device
In case of a USB-memory stick or a digital camera, connect
it to the USB connector at the side. See To make video and
audio connections, Side panel overview, p. 44.
When a USB device is inserted, the Multimedia browser
menu is displayed automatically. See further.
To remove the USB device
1. Press the MENU/BROWSEkey on the remote control to
switch off the main menu.
2. Remove the USB device.
Multimedia BrowserEN
37
a
To view content from a USB device
Tip:if your USB device does not fit into the USB connector at
the side, use an USB extend cable to connect the USB device
to the USB port. Ask your dealer for more information.
Note:USB devices are not supplied with this TV.
2524.3._en.qxd  22-03-2007  15:13  Pagina 37
 
						

							Multimedia Browser menu
1. Insert a USB device.
2. Select the USB device under Multimedia with the cursor
up/down.
>The Multimedia browser allows you to browse content
stored on the inserted USB device.
>The 2-panel browser will be shown with the left panel
containing the content types (Music, Pictures).
>The right panel will display the content that is available
of the selected content type.
3. Press the cursor right to enter the content.
4. Press the cursor up/down to select a content.
5. Press the cursor right to enter the content.
6. Press the cursor up/down to select a file or a directory.
7. In case a fileis selected, press the 
OKkey to display a
picture file or to play an audio file.
In case a directory,albumor playlistis selected, press
the cursor right to enter the content or press the 
OKkey
to start a slide show or a loop playback of the files present.
8. Press the cursor left to keep music playing and switch back
to the Multimedia menu.
9. Press one of the colour keys on the remote control to
perform the corresponding function mentioned at the
bottom of the screen.
10. To stop playing content, press the ‡key on the remote
control.
Multimedia Browser  (Continued)EN
38
Note:press the green colour key to display all the image
files in the current directory as thumbnails when browsing
pictures. Press the green key again to display the image
files in a list.
Tip:the blue colour key can, if necessary, be used to let
the colour keys reappear.
Notes:
-your TV supports slide shows with background music.
See Annex 2, Philips TV-slideshow format with
background music, p. 60;
-the playback will continue to play even if temporarily
switched to browser screens. The audio will be stopped
when another song starts playing, or when the end has
been reached;
-more technical remarks can be found in Annex 3, Philips
TV-Digital camera and USB issues, p. 62.
USBDevice 1
Music
PicturePicture
London 2005
The Beatles
Xmas2004.alb
arnold.jpg
USBDevice 1
Picture
London2005
The Beatles
Xmas2004.alb
arnold.jpg
London 2005
pic001.jpg
pic002.jpg
pic003.jpg
pic004.jpg
USBDevice 1/Picture/London2005
London2005
pic001.jpg
pic002.jpg
pic003.jpg
pic004.jpg
pic001.jpg
pic001.jpg
USBDevice 1/Picture/London2005
London2005                  pic001.jpg
Press OK to play.
Television
MultimediaTV menu
Channel list
Programme guide 
Following icons may appear:
folder self made playlist/album
pictures
music
2524.3._en.qxd  22-03-2007  15:13  Pagina 38
 
						

							Function keys at the bottom of the screen
Details to display a description of the selected file
or directory
Transitions to select if you like to apply a transition
during a slide show 
Slide time to select the duration a picture will be
displayed in a slide show
Rotate to rotate a picture
Repeat one/all to repeat the playback of a music file
Shuffle to shuffle music collections in a random way
Zoom to select one of the zoom magnifications
(x1, x2, x4) with the cursor up/down.
Additionally you can shift the selected zoom
window over the screen with the cursor
keys.
Full/small screen to toggle between a full or a small screen
Multimedia function keys on the remote control
Òto fast rewind displaying content
‡to stop playing content
π- to play a single file, start a slide show, playback of a
folder or other collection
- to pause playing content
†to fast forward displaying content
Multimedia Browser  (Continued)EN
39
Note:to rotate a picture or to select one of the zoom
magnifications, first stop the slide show with the 
OKkey or
the blue colour key.
2524.3._en.qxd  22-03-2007  15:13  Pagina 39
 
						

							Most TV channels broadcast information via teletext.
This TV has a 1200 pages memory that will store most
broadcasted pages and subpages to reduce waiting time. After
each programme change, the memory is refreshed.
The main index page appears on the screen.
Select a Teletext page