Philips 47pfl7403 User Manual

							EN-9
EN
Align the plate/bracket to the four 2. 
mounting nuts, placing the supplied 
spacers betw een the plate/brack et and the 
mounting nuts. 
Using a spanner or cross-head scre wdriver, 
insert the supplied bolts through the plate/
bracket and spacers, tightl y securing the 
bolts to the mounting nuts. 
x4
Continue with the instructions provided 3. 
with  your VESA-compatible wall brack et.
Connect the antenna cable3�3 
HDMI 3HDMI2
CVIAV INAV OU T
VIDEOLRLPrPbYRLAUD IO INSERV. CVGA
RLRVIDEO
HDMI 1
TV ANTENNA75X
1. Locate the TV ANTENNA connector at 
the back of the TV.
Connect one end of the antenna cable 2. 
(not supplied) to the TV ANTENNA 
connector. Use an adaptor if the antenna 
cable  does not fit.
Connect the other end of the antenna 3. 
cable to  your antenna outlet, ensuring that 
the cable is tightl y secured at both ends.
Connect the 3�4 mains cord
WARNING  B
Verify that your mains voltage corresponds 
with the voltage printed at the back of the 
TV.  Do not insert the mains cor d if the 
voltage is different.
To connect the mains cord3�4�1 
Note  D
The location of the mains connector varies 
according to TV model.
Locate the 1. AC IN mains connector at the 
back or on the bottom of the TV.
Connect the mains cor d to the 2. AC IN 
mains connector.
Connect the mains cor d to the mains, 3. 
ensuring that the cor d is tightly secured at 
both ends. 
 
 
 
 
 
 
 
 
Downloaded From TV-Manual.com Manuals 
						

							EN-10
Manage cables3�5 
Route your mains cor d, antenna cable and all 
other device cables through the cable holder at 
the back of the TV. This holder helps  keep  your 
cables tidy and easil y manageable. 
Insert the remote control 3�6 
batteries
Slide the battery cover off the back of the 1. 
remote control.
Insert the tw o supplied batteries. Be sure 2. 
the + and - ends of the batteries line up 
with the markings inside the case.
Slide the cover back into position.3. 
Note   D
Remove the batteries if not using the 
remote control for an extended period of 
time.
Switch on the TV3�7 
The first time  you s witch on the TV, check that 
the mains cor d is properly connected. When 
ready, turn on the mains, then press POWER 
on the side of the TV.
Select your location3�8 
The first time and onl y the first time when 
you s witch on the TV, an on-screen  display will 
prompt  you to select a location. The location 
settings is to maximise  your vie wing pleasure 
depending on  your environment at home or at 
the shopfloor.
Location
Home
Shop
Please select location  
to continue
Press 4.  Î or ï a location.
Press 5.  to confirm  your choice.
Re-select your location3�9 
If  you  wish to re-select  your location, see 
Section 6.4 Change to Shop or Home mode.
Downloaded From TV-Manual.com Manuals 
						

							EN-11
EN
Use your TV 4 
This section helps you perform basic TV  
operations. Instructions on advanced TV opera-
tions are provided in Section 5 Use more of your 
TV.
4�1 Switch your TV on/off or to 
standby
Switch on your TV4�1�1 
POWER
CHANNE
L
MENU
VOLUME
indicator 
light
Po
we r
Press •	POWER on the side of the TV.  
An indicator light comes on.
Switch off your TV4�1�2 
Press •	POWER on the side of the TV.  
The indicator light s witch off.
Switch your TV to standby4�1�3 
Press •	. POWER on the remote control. 
Tip   E
Though your TV consumes ver y little power 
when in standb y, energ y continues to be 
consumed as long as the mains remain 
connected and po wered. When not in use 
for extended periods of time, s witch off and 
disconnect the TV from the mains. 
Switch on the TV from standby4�1�4 
If the standby indicator is on (red), press •	. 
on the remote control.
Note  D
If you cannot locate y our remote control 
and you want to s witch on the TV from 
standby, press CHANNEL + or - on the 
side of the TV. 
Watch TV4�2 
Switch channels4�2�1 
Press a number (0 to 99) or press •	 +/- 
on  your remote control.
Press •	CHANNEL +/- on the side controls 
of the TV. 
Press •	 on the remote control to 
return to the previousl y viewed TV channel. 
 
 
 
 
 
 
 
Downloaded From TV-Manual.com Manuals 
						

							EN-12
Adjust volume4�2�2 
Press •	 + or - on the remote control.
Press •	 + or - on the side controls of 
your TV.
Press •	 on the remote control to mute 
the sound. Press  again to unmute on the 
sound.
Watch connected devices4�3 
Switch on the  device.1. 
Press 2.  on the remote control then 
select the input  your  device is connected 
to.
Press 3.  to select the  device. 
 
 
Use Ambilight 4�4 
Ambilight  Dis not available in all models. 
Ambilight is an innovative Philips feature that 
adds reactive ambiant lighting to  your vie wing 
experience.
Press 1.  on the remote control. 
Ambilight turns on.
Press 2.  again to turn off Ambilight.
For more information on Ambilight, see Section 
5.4 Adjust Ambilight settings.
Tip  E
A diml y lit room is ideal for a complete 
Ambilight experience.
Downloaded From TV-Manual.com Manuals 
						

							EN-13
EN
Use more of your TV5 
This section helps you perform advanced TV 
operations, including ho w to: 
Use the TV menus (•	Section 5.2)
Adjust picture and sound settings  •	
(Section 5.3)
Adjust Ambilight settings (•	Section 5.4)
Create a surf list (•	Section 5.5)
Use timers and child lock (•	Section 5.6)
Use Demo mode (•	Section 5.7)
Remote control overview5�1 
This section provides a  detailed overview of 
remote control features.
4
2
10
16
13
19 1
18 22
23
6
20
3
5
7
8
9
11
12
1415
17
21
 
						

							EN-14
POWER 1. Switches the TV on from standb y or back to standby.
2.   (SOURCE) 
Selects connected  devices.
3.  (ACTIVE CONTROL) 
Select On, Off, or On + Light Sensor*. 
The TV measures and corrects incoming 
signals to provide the best picture. 
4.  * (DEMO) 
Toggles the Demo menu on or off.
5.  (SURF)  
Stores favourite channels.
No function.6. 
7.  (FORMAT)  Toggles through a selection of picture formats. 
8.  (OK)   
Accesses the menus and activates settings.
NAVIGATION KEYS 9. 
Navigates the menu.
10.    (SMART MODE)  
Toggles through predefined picture and 
sound settings.
11.  +/-(CHANNEL +/-) 
Switches to the next or previous channel.
12.  (MUTE)  
Turns the sound on or off.
NUMBER KEYS 13. 
Selects a channel, page or setting.
14.  (ALTERNATE CHANNEL)  
Returns to the previousl y-viewed channel.
15.   (STATUS/EXIT) 
Displa ys channel information or exits from 
a menu.
16.  +/-(VOLUME +/-) 
Increases or  decreases volume.
17. / (MENU/EXIT) 
Switches the menu on or off.  
18.  (BACK)  
To return to the previous menu.
19.  (INCREDIBLE SURROUND) 
Enables Incredible Surround  with stereo 
sources. Spatial mode is enabled  with mono 
sources.
20. No function.
21.  (SLEEP) 
Activates Timer menu. 
22.  * (AMBILIGHT*) 
Switches Ambilight on or off. 
No function.23. 
* Available in selected models.
Downloaded From TV-Manual.com Manuals 
						

							EN-15
EN
Use TV menus5�2 
On-screen menus help you install  your TV, 
adjust picture, sound and Ambilight settings and 
access other features. This section  describes 
how to navigate the menus.
Access the main menu5�2�1 
Press 1.  on the remote control to  display 
the main menu. 
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
LocationBrightness
Colour
Contrast
Sharpnes s
Colour Temp
*  Available in selected models
Press 2.  to exit.
The main menu offers the follo wing items:
Picture Setting •	
To adjust picture settings such as 
Brightness, Colour, Contrast, Sharpness and 
Colour Temperature. See Section 5.3 Adjust 
Picture and Sound settings.
Advanced Picture•	 
To turn on or off advance picture settings 
such Contrast+, Active Control, Artifacts 
Reduction* and HD Natural Motion*. See 
Section 5.3 Adjust Picture and Sound settings. 
 
* Available in selected models.
Sound•	 
To adjust sound settings such as Equalizer, 
Balance, Auto Volume Leveller, Incredible 
Surround, and BBE. See Section 5.3 Adjust 
Picture and Sound settings.
Ambilight•	 
To turn Ambilight on or off and to change 
the mode. See Section 5.4 Adjust Ambilight 
settings.
Features •	
To turn features on or off and to ad just 
special features such as Timer, Child Lock, 
Parental Lock and Demo See Section 5.6 
Use timers and child lock and Section 5.7 Use 
Demo mode.
Install•	 
To select the display language, auto store, 
manual store, sort and name TV channels, 
and to store a list of favourite channels. See 
Section 6 Install channels.
Location•	 
To change  your TV location to the Home 
or Shop mode. See Section 6.4 Change to 
Shop or Home mode.
Use the main menu5�2�2 
This section  describes how to use the main 
menu.
Press 1.  on the remote control to  display 
the main menu. 
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
LocationBrightness
Colour
Contrast
Sharpnes s
Colour Temp
*  Available in selected models
 
						

							EN-16
Press 2. Æ to enter the Picture Setting 
menu. 
Picture Setting
Brightness
Colour
Contrast
Sharpnes s
Colour Temp
Press 3.  Æ to select Brightness.
Press 4. Æ to enter the Brightness setting. 
Brightness
Press 5. Î or ï to adjust the setting.
Press 6. Í to return to the Picture settings 
or press  to exit.
Note  D
More choices are available when HD 
equipment or PC is connected.
Adjust picture and sound 5�3 
settings
This section  describes how to adjust picture 
and sound settings.
Adjust picture settings5�3�1 
1. Press  on the remote control and select 
Picture Setting or Advanced Picture � 
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
LocationBrightness
Colour
Contrast
Sharpnes s
Colour Temp
*  Available in selected models
 
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
LocationContrast +
Active Control
Artifacts Reduction *
HD Natural Motion*
*  Available in selected models
Press 2. Æ to enter the list.
Press 3. Î or ï to select a setting:
•	Brightness 
Changes the level of light in the picture.
•	Colour 
Changes the level of saturation.
Contrast•	 
Changes the level of bright parts in the 
picture  keeping the  dark parts unchanged.
•	Sharpness 
Changes the level of sharpness of fine 
details.
Colour Temperature•	 
Sets the colours to Normal, Warm 
(reddish) or Cool (bluish). 
•	Contrast+ 
Changes the contrast range of the picture. 
Switch on or off. 
•	Active Control 
Corrects all incoming signals to provide 
Downloaded From TV-Manual.com Manuals 
						

							EN-17
EN
the best picture possible. Switch on, off, or 
on+light sensor*.
•	Artifacts Reduction* 
Smoothens the transitions on digital 
pictures. Switch on or off.
HD Natural Motion* •	
Reduces the field and line flicker and 
reproduces smooth movement especiall y in 
movies. Switch on or off. 
 
* Available in selected models.
5�3�2 Use Smart Mode
Apart from manually adjusting picture settings, 
you can use Smart Mode to set  your TV to a 
predefined picture, sound and Ambilight setting. 
Press 1.    on the remote control to 
toggle through a selection of pre-defined 
picture and sound settings. 
Summary of smart modes
Vivid•	 
Sharp picture settings and clear sound for 
high action.
Standard•	 
For normal TV vie wing.
Movie•	 
Brilliant picture settings for a cinematic 
experience. 
Game•	 
Optimised for PCs, game consoles and 
playstations.
Power Saver•	 
Eco friendl y settings to reduce po wer 
consumption.
Personal•	 
Based on the settings  you customised in 
the Picture Setting menu.
Note:  DThe po wer meter displa yed on the 
screen indicates the po wer consumption 
for each mode. For example, 10% means 
this mode uses 10% of the TV’s total po wr 
consumption in wattage. 
10%
Powe r
100%
0%
Change picture format5�3�3 
Change the picture format to suit  your content.
Press1.   ∏ on  your remote control. 
Press 2.  Í or Æ to select one of the follo wing 
picture formats:
Wide screen•	 
 
The picture is displayed in the original 
proportions of images transmitted in 16:9 
format.
Note:  DIf y ou displa y a 4:3 picture in 
widescreen mode, the picture is stretched 
horizontall y.
Downloaded From TV-Manual.com Manuals 
						

							EN-18
•	4:3  
 
The picture is reproduced in 4:3 format 
and a black band is displayed on either side 
of the picture. 
Movie expand 14:9•	  
 
The picture is sho wn in 14:9 format. A 
thin black band remains on both sides of 
the picture and the top and bottom of the 
picture is clipped off. 
Movie expand 16:9•	 
 
The picture is enlarged to 16:9 format. This 
mode is recommended  when displaying 
pictures  with black bands at the top and 
bottom (letterbox). In this mode, large 
parts of the top and the bottom of the 
picture are clipped off.
Subtitle Zoom •	 
 This mode is used to  display 4:3 pictures using the full surface of the screen leaving the sub-titles visible. Part of the top of the 
picture is clipped off.
Super zoom•	 
 This mode is used to  display 4:3 pictures using the full surface of the screen b y enlarging the sides of the picture.  
Adjust sound settings5�3�4 
This section describes how to adjust sound 
settings.
Press 1.  on the remote control and select 
Sound.
Press 2. Æ to enter the list. 
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
LocationEqualizer
Balance
Auto Vol. Leveller
Incr. Surround
BBE
*  Available in selected models
Press 3. Î or ï to select one of the follo wing 
settings:
•	Equalizer 
Adjusts each individual frequency (tone).
Balance•	 
Balances the left and right speak er’s 
sound level.
Auto Volume Leveller •	
Controls the sudden sound level 
increase when changing channels or 
during commercial break.
•	Incredible Surround 
Enhances stereo effect. Select Incr� 
Surround or Stereo (when in stereo 
Downloaded From TV-Manual.com Manuals