Philips 47pfl7403 User Manual

EN-29
EN
Audio L/R cable - White and red
7�2�4 Composite - Basic quality
Composite video provides basic analogue 
connectivity, usually combining a (y ellow) video 
cinch cable  with (white and red) Audio L/R 
cinch cable. Match the cable colours  when 
connecting to the composite Video and Audio 
L/R input connectors on the side of the TV.
 
Composite audio/video cable- Yellow, white and 
red
Connect...

EN-30
DVD player/Home theatre system7�3�3 
Connect a component video cable from the 
DVD player to CVI connectors on the back of 
your TV. 
HDMI  3HDMI 2
AV IN
AV  OU T
VIDE O
R
RL
A
UDIO IN
SER V . C VG
A
L
R VIDE
O
HDMI  1
TV ANTENN A75X
Component 
video IN
D VD play er/Home  Theatre System
L
RPr Pb Y
CV I
L Pr Pb Y
RL
VCR7�3�4 
Connect a composite video cable from the 
pla yer to the AV IN connectors on the back of 
the TV. For recor ding of TV programmes on a 
VCR,...

EN-31
EN
7�3�7 Personal Computer
Caution  CBefore connecting the PC, set the PC 
monitor refresh rate to 60Hz. See Section 
11 Technical data for a list of computer 
resolutions.
Connecting to the back of the TV (VGA)
Connect your PC to the VGA connector at 1.  
the back of the TV. 
Connect an audio cable from  your PC to 2.  
AUDIO IN L/R connectors on the back of 
the TV. 
HDMI  3HDMI 2
CVIA V IN
AV  OU TVIDE O
L
R
L Pr Pb Y
RL
AUDIO IN
SE RV . C VG
A
R L
R VIDE
O
HDMI  1
TV...

EN-32
Use your TV as PC 8 
monitor
Configure PC mode8�1 
1. Connect  your computer in Section 7.3.7 
Personal Computer.
Press 2.   on the remote control. 
The list of sources appears.
Press 3. ï to select VGA and press OK to 
confirm. 
Source list
TV
AV
SIDE AV
CVI
VGA
HDMI 1
HDMI 2
HDMI 3*
Side HDMI*
*  Available in selected models
Note:  DSet y our PC refresh rate to 60 Hz.
Picture settings in PC mode
Except for Horizontal Shift and Vertical Shift, all of the picture settings in PC...

EN-33
EN
Use your TV in High 9 
Definition (HD) mode
The HD (High Definition) mode allows you to 
enjo y clearer and sharper pictures if  you are 
using HD equipment that can produce high 
definition video signals.
Configure HD mode9�1 
1.  Connect  your HD equipment as sho wn in 
the Quick Start Guide
Press 2.  on the remote control. 
The list of sources appears.
Press 3. ï to select the correct HDMI and 
press  to confirm. 
Source list
TV
AV
SIDE AV
CVI...

EN-34
Press the 6.  ke y to exit the menu.  
9�3 Display in native 1080 mode
Note:  DOnl y TVs with the full HD 1080p 
can displa y in native 1080 mode.
When you connect HD equipment that 
supports a resolution of 1080i or 1080p, the 
Displa y (native 1080) feature is available in 
the Features menu. This feature allo ws you to 
watch the original HD format in 1080i/p mode. 
Press the1.    ke y to  displa y the Main 
menu.
Press the 2. Î...

EN-35
EN
Use Philips EasyLink10 
Your TV is enabled for HDMI-CEC connections 
with other devices. The follo wing descriptions 
apply to  devices that are CEC-compliant and 
connected to  your TV through an HDMI cable.
One-touch play
When  you connect  your TV to  devices that 
support One-touch pla y,  you can control  your 
TV and the  devices with one remote control. 
For example,  when you press one-touch pla y 
on...

EN-36
Technical data11 
Supported display resolutions
•	HDMI Input: 
Mode Signal Format 
PC Format 640x480@60Hz, 72Hz,   
  75Hz, 85Hz 
  720x400@70Hz, 85Hz 
  800x600@60Hz, 72Hz,   
  75Hz, 85Hz 
  1024x768@60Hz, 70Hz,   
  75Hz, 85Hz 
  1280x768@60Hz 
  1280x1024@60Hz 
 
Video Format 720x480p@60Hz 
  720(1440)x480i@60Hz 
  720x576p@50Hz 
  720x(1440)x576i@50Hz 
  1280x720p@60Hz 
  1280x720p@50Hz 
  1920x1080i@50Hz, 60Hz 
  1920x1080p@24Hz, 25Hz,   
  30Hz, 50Hz, 60Hz
PC Analog, D-sub input:•...

EN-37
EN
Troubleshooting 12 
This section describes commonl y-encountered 
issues and accompan ying solutions.
General TV issues 12�1 
The TV does not switch on:
Unplug the mains cor d, wait for one minute •	
and plug in the mains again.
Verify that the mains cor d is properly •	
connected and that the mains are po wered.
The remote control is not working 
properly:
Verify that the remote control batteries •	
are correctl y inserted...

EN-38
PC connection issues 12�5 
The PC display on my TV is not stable or 
is not synchronised:
Check that a supported resolution and •	
refresh rate is selected on your PC. See 
Section 11 Technical data for supported 
resolutions and refresh rates. 
Adjust the screen resolution in  your PC. •	
Contact us12�6 
If  you cannot solve  your problem, contact the 
Customer Support Centre in  your countr y 
as listed on the last page of this user manual....