Philips 47pfl5603 User Manual

							Register your product and get suppor t at
www.philips.com/welcome
32PFL7403
42PFL5603
47PFL5603
EN LCD television
________________________________
cover 2727.1  17-04-2008  15:46  Pagina 1
32PFL5403
 
						

							cover 2727.1  17-04-2008  15:46  Pagina 2
 
						

							Table of contents
1 Important  3
1.1 Safety  3
1.2 Care of the screen  3
1.3 Recycling   3
2Y our TV    4
2.1 Television overview  4
2.2 Product highlights  5
3 Getting started  5
3.1 Position the TV  5
3.2 Wall mounting - VESA  6
3.3 Remote control batteries  7
3.4 Antenna cable  7
3.5 Power cable  7
4 Use your TV  8
4.1 Turn on or off - Standby  8
4.2 Watch TV  8
4.3 Watch channels from a digital receiver  9
4.4 Watch connected devices  9
4.5 Watch a DVD  9
4.6 Select a Teletext page  9
5 Use more of your TV  10
5.1 Remote Control  10
5.2 TV menus  11
5.3 Picture and sound settings  13
5.4 Teletext  16
5.5 Create favourite channel lists  17
5.6 Electronic Programme Guide  18
5.7 Timers and locks  19
5.8 Subtitles  20
5.9 Watch and play photos, MP3... 21
5.10 Listen to digital radio channels  22
5.11 Software update  23
6 Channel installation  25
6.1 Automatic channel installation  25
6.2 Manual channel installation  26
6.3 Rearrange stored channels  26
6.4 Channel management  27
6.5 Digital reception test  27
6.6 Factory settings  27
7 Connections (DVD, receiver, ...)  28
7. 1 Connections overview  28
7.2 About connections  29
7.3 Connect your devices  31
7.4 Setup devices  34
8T echnical data  36
9T roubleshooting  37
10 Index  39
Register your product and get support at
www.philips.com/welcome.
Ta ble of contents 1
ENGLISH
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 1
 
						

							2008 © Koninklijke Philips Electronics
N.V. All rights reser ved. Specifications
are subject to change without notice.
Trademarks are the proper ty of
Koninklijke Philips Electronics N.V. or
their respective owners.
Philips reser ves the right to change
products at any time without being
obliged to adjust earlier supplies
accordingly.
The material in this manual is believed
adequate for the intended use of the
system. If the product, or its individual
modules or procedures, are used for
purposes other than those specified
herein, confirmation of their validity
and suitability must be obtained. Philips
warrants that the material itself does
not infringe any United States patents.
No fur ther warranty is expressed or
implied.
Wa rranty
No components are user-ser viceable.
Do not open or remove covers and
do not inser t objects in the ventilation
slots or inser t objects not suitable for
the specific connectors. Repairs may
only be done by Philips Ser vice
Centres and official repairshops. Failure
to do so shall void any warranty, stated
or implied.
Any operation expressly prohibited in
this manual, any adjustments, or
assembly procedures not
recommended or authorised in this
manual shall void the warranty.
Pixel characteristics
This LCD product has a high number
of colour pixels. Although it has
effective pixels of 99,999% or more,
b lack dots or bright points of light
(red, green or blue) may appear
constantly on the screen. This is a
structural proper ty of the display
(within common industr y standards)
and is not a malfunction.
Open source software
This television contains open source
software. Philips hereby offers to
deliver or make available, upon
request, for a charge no more than the
cost of physically performing source
distribution, a complete machine-
readable copy of the corresponding
source code on a medium customarily
used for software interchange.
This offer is valid for a period of 3 y
ears after the date of purchase of this
product.
To  obtain the source code, write to
Philips Innovative Applications N.V.
Ass. to the Development Manager
P athoekeweg 11 
B-8000 Brugge
Belgium
Compliance with EMF
Koninklijke Philips Electronics N.V.
manufactures and sells many products
targeted at consumers, which, like any
electronic apparatus, in general have
the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business
Principles is to take all necessar y
health and safety measures for our
products, to comply with all applicable
legal requirements and to stay well
within the EMF standards applicable at
the time of producing the products.
Philips is committed to develop,
produce and market products that
cause no adverse health effects.
Philips confirms that if its products are
handled properly for their intended
use, they are safe to use according to
scientific evidence available today.
Philips plays an active role in the
development of international EMF and
safety standards, enabling Philips to
anticipate fur ther developments in
standardisation for early integration in
its products.Copyrights
VESA, FDMI and the VESA
Mounting Compliant logo are
trademarks of the Video Electronics
Standards Association.
Manufactured under license
from Dolby Laboratories. ‘Dolby’, ‘Pro
Logic’ and the double D symbol 
G,
are trademarks of Dolby Laboratories.
Manufactured under
license from BBE Sound, Inc. Licensed
by  BBE, Inc under one or more of the
f ollowing US patents: 5510752,
5736897. BBE and BBE symbol are
registered trademarks of BBE Sound
Inc.
The “HD Tick” Logo is a
trademark of AEEMA.
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States
and/or other countries
® Kensington and MicroSaver are
registered US trademarks of ACCO
Wo rld Corporation with issued
registrations and pending applications
in other countries throughout the
wor ld.
All other registered and unregistered
trademarks are the proper ty of their
respective owners.
2
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 2
 
						

							ENGLISH
Impor tant3
1Important
Read this user manual before you star t to use this
product.
Pay attention to this section and closely follow the
instructions. The warranty does not apply to
damage caused by not taking into account the
instructions.
1.1 Safety  
•T o avoid shor t circuit, do not expose the product
to rain or water.
•T o avoid a risk of fire or electric shock do not
place naked flame sources (e.g. lighted candles)
close to the TV.
• Leave a space of at least 10cm (4 inches) all
around the TV for ventilation.
• Keep away from radiators or other heat sources.
• Do not install the TV in a confined space such as
a book case. Make sure that cur tains, cupboards
and so on cannot obstruct the air flow through
the ventilation slots.
•T o prevent damage, do not inser t any object into
the ventilation slots.
• Make sure the TV cannot fall down. Place the TV
on a solid and flat surface and only use the stand
provided with the TV.
•T o prevent damaging the mains cord, do not
place the TV, or anything else, on the cord.
Damage the cord may cause a fire or electric
shock.
• When mounted on a swivel stand or VESA wall
bracket avoid force coming on the mains plugs.
Mains plugs that are par tly loosened can cause
arcing or fire.
1.2 Care of the screen
•Unplug the TV before cleaning.
• Clean the surface with a soft damp cloth. Do not
apply any other substance (chemical or
household cleaning agent). This may damage the
screen.
• Do not touch, push or rub or strike the screen
with anything hard as this may scratch, mar or
damage the screen permanently.
•T o avoid deformations and colour fading, wipe off
water drops as soon as possible. •
Stationar y images
Av oid stationar y images as much as possible. If
y ou cannot, reduce screen contrast and
brightness to prevent damage to the screen.
Stationar y images are images that remain on the
screen for a long time. Examples of stationar y
images are: on screen menus, teletext pages, black
bars, stock market information,TV channel logos,
time displays, and so on.
1.3 Recycling
•T ake the packaging to your local recycling centre.
• Dispose old batteries safely according local
regulations.
• This product is designed and manufactured for
material recycling and re-use.
• Do not dispose this product with other
household waste. Inform yourself or ask your
dealer about local environmentally safe recycling
and local regulations. Uncontrolled waste disposal
harms the environment and human health.
(EEC 2002/96/EC)
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 3
 
						

							2Your TV
This section gives you an over view of the controls
and functions of this TV.
2.1 Television overview
Control
1Power switch
2 Program/Channel up and down
3 Menu
4V olume up and down
5 Remote control sensor
Connectors
1 Back connectors
2 Side connectors
For more info see section  7 Connections. Remote control
1T
urn On or switch to Standby
2 Source 
3T eletext 
4 Colour keys 
5N avigation keys
6 Menu On or Off
7 Program/Channel up  +and down  -
8V olume up  +or down  -
For more info see section  5.1 Remote control
over view.
4 Your TV
OK
EXIT
MENU
P
123
456
78
0 9
BROWSE
BACKGUIDE
DEMO
MHEG
CANCEL
TELETEXT SOURCE
SUBTITLE
INFO
OPTION
1
2
3
8
4
5
7
61
2
4
3
POWER
PROGRAM
MENU
VOLUME
5
12
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 4
 
						

							ENGLISH
2.2 Product highlights
Your new TV is equipped with some of the most
modern audio or video innovations.
Y our TV offers the following advantages ...
Full High Definition LCD display 
(42-47PFL5603D only)
A full HD resolution of 1920x1080p, the highest
resolution of HD sources. It offers a brilliant flicker-
free progressive scan picture with optimum
brightness and superb colours.
Pixel Plus
Offers perfect picture quality from any source.
100Hz Clear LCD  
100Hz Clear LCD gives a superior motion
sharpness, better black level,high contrast with a
flicker-free, quiet image and a larger viewing angle.
D VB-T integrated tuner
Next to normal analogue TV broadcast your TV
receives digital terrestrial TV and radio broadcasts.
Digital broadcasting Australia : see www.dba.org.au
Electronic Programme Guide - EPG
The EPG shows the scheduled digital TV
programmes on screen. The guide can remind you
when programmes star t, switch the TV on, etc.
HDMI connectors
HDMI connectors for highest quality high definition
connectivity.
USB connection 
Multimedia connection for instantly view or play
y our photos or music.
3 Get started
This section helps you with the positioning and the
first time installation of the TV.
3.1 Position the TV
Carefully read the safety precautions in section 1.1
Safety before you position the TV.
• Large screen TVs are heavy. Carr y and handle the
TV with at least two persons.
• The ideal distance from which to watch TV is
three times its diagonal screen size.
•P osition the TV where light does not fall directly
on the screen.
•Y our TV is equipped with a Kensington Security
Slot at the back of the TV for an anti-theft lock
(not supplied).
On 32” TV model.
On 42” and 47” TV model.
Y our TV 5
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 5
 
						

							6Your TV
3.2 Wall mounting - VESA
) Warning
W all mounting of the TV should only be performed
by  qualified installers. Koninklijke Philips Electronics
N.V. bears no responsibility for improper mounting
that results in accident or injur y.
Step 1 Purchase a VESA-compatible wall
bracket
Depending on the size of your TV screen,
purchase one of the following wall brackets:
TV VESA- Special
screen compatible instructions
size wall bracket
(inches/ type
cm) (millimeters)
32”/81cm       Adjustable The VESA- 300 x 300 compatible bracket must
be adjusted
to 200 x
300 before
securing to
the TV
42”/107cm     Fixed 400 x 400   None
or larger
Step 2 Remove the TV stand
r Note
These instructions are only applicable to TV models
with mounted stands. If your TV stand is not
mounted, skip to  Step 3 Secure the VESA-
compatible wall bracket to the TV .
‡ Carefully place the TV face down on a flat,
stable surface that is covered by soft cloth. The
cloth should be thick enough to protect your
screen. ®
Using a cross-head screwdriver (not supplied),
unscrew the four bolts that secure the stand to
the TV.
Ò Firmly pull the stand from the bottom of the
TV. Place both the stand and bolts in a secure
location for future reinstallation.
Step 3 Secure the VESA-compatible wall
bracket to the TV
‡Locate the four mounting nuts at the back of
the TV.
® Continue with the instructions provided with
your VESA-compatible wall bracket.
r Note
When securing the VESA-compatible wall bracket
to your TV, use M6 bolts for 32 inch models or 
M8 bolts for larger models (bolts not supplied).
4x
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 6
 
						

							3.3 Remote control batteries
‡Open the batter y cover on the back of the
remote control.
® Inser t the 2 batteries supplied (Type AAA-
LR03-1,5V). Make sure the  +and  -ends of the
batteries line up correctly (inside of case is
marked.)
Ò Close the cover.
r Note
Remove the batteries if not using the remote
control for an extended period of time.
3.4 Antenna cable
‡ Locate the antenna connection at the back of
the TV.
® Inser t the antenna cable tightly into the
Antenna  x socket.
3.5 Power cable
Keep the mains plug at the wall socket accessible at
all time.
The TV is never powered off completely and
consumes energy unless the mains cord is physically
unplugged.
Although this TV has a ver y low standby power
consumption, unplug the mains cord if you do not
use the TV for a long time to save energy.
‡Verify that your mains voltage corresponds with
the voltage printed on the sticker at the back of
the TV. Do not inser t the mains cord if the
v oltage is different.
® Inser t the mains cord tightly.
On 32” TV model.
On 42” and 47” TV models.
r Note
The location of the mains connector varies
according to the TV model.
Y our TV 7
ENGLISH
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 7
 
						

							4Use your TV 
Learn how to operate your TV for daily use.
4.1 Turn on or off - Standby
rNote
The TV may take up to 15 seconds to turn on.
To  turn on the TV:
• Press  BPower at the right of the TV if the
standby indicator is off.
• Press  Bon the remote control if the standby
indicator is on.
To  switch to standby:
• Press  Bon the remote control.
To  turn off:
• Press  BPower at the side of the TV.
4.2 Watch TV
4.2.1 Switch channels
‡To switch TV  channels:
• Press a number (1 to 999) or press  P+or P-
on your remote control.
• Press 
Program/Channel-or  +on the side
controls of the TV.
® Press  Rto return to the previously viewed TV
channel or connected device.
4.2.2 Adjust volume
‡ To adjust the volume:
• Press  V+ or - on the remote control
• Press  Volume + or - on the side controls
of your TV.
® To m ute the sound:
• Press  ¬.
• Press  ¬again to restore the sound.
8Use your TV
POWER
PROGRAM
MENU
VOLUME
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 8