Philips 47pfl3605h User Manual

							29
a TV ANTENNA
Signal input from an antenna, cable or 
satellite.
  
b  EXT 1 and EXT 2 (CVBS and RGB) 
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
 
c SPDIF OUT
Digital audio output to home theatres 
and other digital audio systems.
 
TV ANTENNA
SPDIF OUT
7 Connect devices
This section describes how to connect devices 
with different connectors. Examples are 
provided in the Quick Star t.
Note
You can use different types of connectors to   •
connect a device to your TV.
Back connector
 
English
EN
 
						

							30
g  EXT 3 (Y Pb Pr and AUDIO L/R) 
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
 
d SERV. U
For use by ser vice personnel only.
e  PC IN (VGA and AUDIO IN) 
Audio and video input from a computer.
 
f HDMI 1
Digital audio and video input from high-
definition digital devices such as Blu-ray 
players.
 
Connections via DVI or VGA require an 
additional audio cable (see ‘Connect a 
computer’ on page 32).
VGA
VGA
AUDIO INLEFT/RIGHT
VGA/DVI
 
EN
 
						

							31
b VIDEO
Composite video input from analogue 
devices such as VCRs.
 
c USB
Data input from USB storage devices.
 
d HDMI
Digital audio and video input from high-
definition digital devices such as Blu-ray 
players.
  
e  (Headphone) 
Stereo audio output to headphones or 
earphones.
Side connector
 
a AUDIO L/R
Audio input from analogue devices 
connected to VIDEO.
 
English
EN
 
						

							32
• DVI - HDMI cable
 
• HDMI cable and HDMI-DVI adaptor
 
• VGA cable
 
DVI
AUDIO INLEFT/RIGHT
VGA/DVI
DVI
AUDIO INLEFT/RIGHT
VGA/DVI
VGA
VGA
AUDIO INLEFT/RIGHT
VGA/DVI
f COMMON INTERFACE
Slot for a Conditional Access Module 
(C AM).
 
Connect a computer
Before you connect a computer to the TV
Set the screen refresh rate on your  • 
computer to 60Hz.
Select a suppor ted screen resolution on  • 
your computer.
Connect a computer with one of the 
following connectors:
Note
Connections via DVI or VGA require an   •
additional audio cable.
• HDMI cable
 
EN
 
						

							33
Access CAM services
1  Af ter inser ting and activating the CAM, 
press 
 MENU.
2 Press  to select [Setup] > 
[Features] > [Common interface].
Applications provided by the digital TV    »
ser vice operator appear on the screen.
Note
This menu option is available only if the CAM   •
is inser ted and activated correctly.
Use a Conditional Access 
Module
A Conditional Access Module (CAM) is 
provided by digital TV ser vice operators to 
decode digital TV channels.
Note
Refer to the documentation from your ser vice   •
operator on how to inser t a smar t card into 
the Conditional Access Module.
Insert and activate a CAM
Caution
Be sure to follow the instructions described   •
below. Wrong inser tion of a CAM may 
damage both the CAM and your T V.
1  Switch off the T V and disconnect it from 
the power outlet.
2  Following the directions printed on the 
CAM, gently inser t the CAM into the 
COMMON INTERFACE at the side of 
the T V.
 
3  Push the CAM in as far as it will go.
4  Reconnect the T V to the power outlet.
5  Turn on the T V and wait for the CAM 
to be activated. This may take several 
minutes. Do not remove the CAM from 
the slot when in use — removing the 
CAM will deactivate digital ser vices.
English
EN
 
						

							34
Enable or disable EasyLink
Note
Do not enable Philips EasyLink if you do not   •
intend to use it.
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Preferences] > 
[EasyLink].
3 Select [On] or [Of f ].
Use one-touch play
1  Af ter enabling EasyLink, press play on 
your device. 
The TV automatically switches to the    »
correct source.
Use one-touch standby
1 Press  (Standby-On) on the T V ’s or 
device’s remote control. 
The TV and all connected HDMI    »
devices switch to standby.
Set TV speakers to EasyLink mode
When you play content from an EasyLink 
compliant home theater, the T V speakers are 
automatically muted.
1  Enable one-touch play and one-touch 
standby between your Easylink compliant 
devices by following the instructions 
in the previous section (see ‘Enable or 
disable EasyLink ’ on page 34).
2 Press  MENU.
3 Press  to select [Setup] > [Sound] 
> [TV speakers] > [Auto EasyLink].
The TV speakers are turned off    »
automatically when content from an 
Easylink compliant system is detected.
Use Philips EasyLink
Your T V suppor ts Philips EasyLink, which 
uses the HDMI CEC (Consumer Electronics 
Control) protocol. EasyLink-compliant devices 
that are connected through HDMI connectors 
can be controlled by a single remote control. 
Note
The EasyLink-compliant device must be   •
switched on and selected as the source.
Philips does not guarantee 10 0% 
  •
interoperability with all HDMI CEC devices.
EasyLink features
One-touch play 
When you connect your T V to devices that 
suppor t one-touch play, you can control your 
T V and the devices with one remote control.
One-touch standby
When you connect your T V to devices that 
suppor t standby, you can use your T V remote 
control to put your T V and all connected 
HDMI devices in standby mode.
System audio control
When you connect your T V to HDMI 
CEC compliant devices, your TV can 
switch automatically to play audio from the 
connected device. 
To use one-touch audio, you must map the 
audio input from the connected device to 
your T V. 
You can use the remote control from the 
connected device to adjust the volume.
EN
 
						

							35
4 Press  to select [Setup] > [Sound] 
> [TV speakers] > [On] to disable 
system audio control and enable the T V 
speakers.
Note
To mute the T V speakers, select   •[TV 
speakers] > [Of f ].
Use a Kensington lock
There is a Kensington security slot at the back 
of the TV. Prevent theft by looping a Kensington 
lock between the slot and a permanent object, 
such as a heavy table.
 
English
EN
 
						

							36
Multimedia
Suppor ted storage device: USB (Only  • 
FAT or FAT 32 USB storage devices are 
suppor ted) 
Suppor ted multimedia file formats: • 
Images: JPEG • 
Audio: MP3 • 
Note
Multimedia file names must not exceed 128   •
characters. 
Tuner / Reception / 
Transmission
Aerial input: 75 ohm coaxial (IEC75) • 
DVB: DVB Terrestrial, DVB -T MPEG4 • 
T V system: DVB COFDM 2K /8K; PAL I,  • 
B/G, D/K; SECAM B/G, D/K , L /L’ 
Video playback: NTSC , SECAM, PAL • 
Tuner Bands: Hyperband, S-channel, UHF,  • 
VHF
Remote control
Ty p e :  P F 0 1E 0 9 B • 
Batteries: 2 x A A A (LR03 type) • 
Power
Mains power: 220 -240V, 50Hz • 
Standby power: < 0.3 W • 
Ambient temperature: 5 to 40 degrees  • 
Celsius
8 Product 
information
Product information is subject to change 
without notice. For detailed product 
information, go to www.philips.com/suppor t.
Supported display resolutions
Computer formats
Resolution - refresh rate: • 
640 x 480 - 60Hz • 
800 x 600 - 60Hz • 
1024 x 768 - 60Hz • 
1280 x 720 -60Hz • 
1280 x 768 -60Hz • 
1280 x 1024 - 60 Hz • 
1360 x 768 - 60Hz • 
1440 x 900 - 60Hz (For Full HD  • 
only)
1680 x 1050 - 60Hz (For Full HD  • 
only)
Video formats
Resolution - refresh rate: • 
480i - 60Hz • 
480p - 60Hz • 
576i - 50Hz • 
576p - 50Hz • 
720p - 50Hz, 60Hz • 
1080i - 50Hz, 60Hz • 
1080p - 24Hz, 25Hz, 30Hz, 50Hz,  • 
60Hz.
EN
 
						

							37
Product specification
Design and specifications are subject to change 
without notice.
  
32PFL3605H
Without T V stand • 
Dimension ( WxHxD): 795.6 x 508.3  • 
x 93 (mm)
Weight: 8.3 kg • 
With T V stand • 
Dimension ( WxHxD): 795.6 x 556.6  • 
x 220.8 (mm)
Weight: 9.4 kg • 
42PFL3605H
Without T V stand • 
Dimension (WxHxD): 1018.5 x  • 
635.7 x 83 (mm)
Weight: 11.5 kg • 
With T V stand • 
Dimension ( WxHxD): 1018.5 x 683  • 
x 235.8 (mm)
Weight: 12.8 kg • 
47PFL3605H 
Without T V stand • 
Dimension ( WxHxD): 1129.8 x  • 
700.7 x 83 (mm)
Weight: 16.8 kg • 
With T V stand • 
Dimension ( WxHxD): 1129.8 x 746.4  • 
x 270.1 (mm)
Weight: 19.8 kg • 
Supported TV  mounts
To mount the TV, purchase a Philips TV mount 
or a VESA-compatible TV mount. To prevent 
damage to cables and connectors, be sure to 
leave a clearance of at least 2.2 inches or 5.5cm 
from the back of the TV.
Warning
Follow all instructions provided with the T V   •
mount. Koninklijke Philips Electronics N.V. 
bears no responsibility for improper TV 
mounting that results in accident, injury or 
damage.
TV screen 
size 
(inches)Required 
pitch (mm)Required 
mounting bolts
32 200 x 200 4 x M6 (≤ 10 mm)
42 300 x 200 4 x M6 (≤ 10 mm)
47 400 x 300 4 x M8 (≤ 12 mm)
English
EN
 
						

							38
Cannot remove ‘e-sticker’ banner displayed on 
the TV.
To remove the logos and images, set the    •
location of your T V to home.
1. Press 
 MENU.
2. Select [Setup] > [Installation] > 
[Preferences] > [Location].
3. Select [Home] and press OK. 
TV channel issues
Previously installed channels do not appear in 
the channel list:
Check that the correct channel list is    •
selected.
No digital channels were found during the 
installation:
Check that the TV suppor ts DVB-T,     •
DVB -T Lite or DVB -C in your countr y. 
Some channels are not automatically installed 
on my TV:
During installation, make sure that    •
you select the countr y where you are 
installing the T V (see ‘Step 2 Select your 
countr y’ on page 26).
Picture issues
The TV is on, but there is no picture:
Check that the antenna is properly    •
connected to the T V.
Check that the correct device is selected    •
as the T V source.
There is sound but no picture:
Check that the picture settings are    •
correctly set.
There is poor TV reception from an antenna 
connection:
Check that the antenna is properly    •
connected to the T V.
Loudspeakers, unear thed audio devices,    •
neon lights, high buildings and other large 
objects can influence reception quality. 
If possible, tr y to improve the reception 
quality by changing the antenna direction 
or moving devices away from the T V.
If reception on only one channel is poor,    •
fine tune this channel.
9 Troubleshooting
This section describes commonly encountered 
issues and accompanying solutions.
General TV  issues
The TV does not switch on:
Disconnect the power cable from the    •
power outlet. Wait for one minute then 
reconnect it.
Check that the power cable is securely    •
connected.
The remote control is not working properly:
Check that the remote control batteries    •
are correctly inser ted according to the 
+/- orientation.
Replace the remote control batteries if    •
they are flat or weak.
Clean the remote control and T V sensor    •
lens.
The standby light on the TV blinks red:
Disconnect the power cable from the    •
power outlet. Wait until the T V cools 
down before reconnecting the power 
cable. If the blinking reoccurs, contact 
Philips Consumer Care. 
You forgot the code to unlock the TV lock 
feature
Enter ‘8888’.   •
The TV menu is in the wrong language.
Change the T V menu to your preferred    •
language.
When turning the TV on / off / to standby, you 
hear a creaking sound from the TV chassis:
No action is required. The creaking sound    •
is normal expansion and contraction of 
the T V as it cools down and warms up. 
This does not impact per formance.
EN