Philips 46pfl6806h User Manual

     
EN      31   
English
 
1. Press . 2. Select [Setup] > [TV settings] > 
[EasyLink]. 
3. Select [On] or [Off], then press OK.  
Control devices simultaneously 
If you connect multiple HDMI-CEC devices 
that support this setting, all the devices 
respond to the TV remote control. 
Caution: This is an advanced setting. Devices 
that do not support this setting will not 
respond to the TV remote control. 
1. Press . 2. Select [Setup] > [TV settings] > 
[EasyLink]. 
3. Select [EasyLink Remote Control] >...

  
EN      32       
 [TV]: On by default.   
Stream TV audio through the TV and 
the connected HDMI-CEC audio 
device until the connected device 
switches to system audio control. TV 
audio is then streamed through the 
connected device.    [Amplifier]: Stream audio through the 
connected HDMI-CEC device. If system 
audio mode is not enabled on the 
device, audio continues to stream from the TV speakers. If [EasyLink autostart] 
was enabled, the TV prompts the 
connected device to switch to system...

     
EN      33   
English
 4 Set up your TV 
Settings assistant 
Use the settings assistant to guide you 
through the picture and sound settings. 
1. While you watch TV, press . 2. Select [Setup] > [Quick picture and 
sound settings], then press OK. 
3. Select [Start], then press OK.   
4. Follow the onscreen instructions to 
choose your preferred settings.  
Picture and sound 
More picture settings 
1. Press . 2. Select [Setup] > [TV settings] > 
[Picture], then press OK. 
3. Select a setting to...

  
EN      34       
Audio settings 
Select audio language 
If the TV channel has multiple or dual sound 
broadcast, you can select the preferred 
audio language. 
While you watch TV, press  OPTIONS. 
 [Audio language]: Select the audio 
language for digital channels. 
 [Dual I-II]: Select the audio language for 
analogue channels.   
Digital TV channels can stream several audio 
languages. If multiple languages are available, 
select the preferred language.  
1. Press . 2. Select [Setup] > [Channel...

     
EN      35   
English
 Update channel list 
When the TV was switched on for the first 
time, a full installation of channels was 
performed. 
You can automatically add or remove digital 
channels or manually update channels. 
Note: If you are prompted to enter a code, 
enter 8888. 
Automatic update 
To automatically add or remove digital 
channels, leave the TV in standby mode. The 
TV updates channels and stores new 
channels everyday. Empty channels are 
removed from the channel list.   
If a...

  
EN      36       
 Select [Search] then press OK to 
search for the next channel 
automatically.   
3. When the correct channel frequency is entered, select [Done], then press OK. 
4. Select [Store as new channel], then press 
OK to store the new TV channel.  
Install digital and satellite channels 
Install digital channels 
To improve TV reception, reposition the 
antenna. You need to know the correct 
frequency to tune. For best results, contact 
the service provider or get a professional...

     
EN      37   
English
 
 the same hardware type, as indicated 
by the sticker on the back of the TV, 
(for example Qxxx.xx.Lx), and 
 compatible software versions. 
An onscreen message will notify you if the 
channel list cannot be copied to the second 
TV. 
Note: If you are prompted to enter a code, 
enter 8888. 
Copy channel list to USB 
1. Connect a USB storage device to the TV 
with the channels installed on it. 
2. Press . 
3. Select [Setup] > [TV settings] > 
[Preferences] > [Channel list...

  
EN      38       
To switch on hearing impaired audio and 
subtitles 
1. While you watch TV, press  OPTIONS. 
2. Press one of the following buttons to 
select an option: 
 Red: Switch hearing impaired on or off. 
 Green: Switch on hearing impaired 
audio and subtitles. 
3. Press  to exit. 
Visually impaired 
Tip: To verify whether visually impaired 
audio is available, press  OPTIONS and 
select [Audio language]. Languages with an 
eye icon support visually impaired audio. 
To switch on visually...

     
EN      39   
English
 
For more information, see the following 
pages.   
Update with USB 
Before performing this procedure, make sure 
that you have the following: 
 Spare time to complete the entire 
update. 
 A USB flash drive that has at least 
256MB of storage space, is FAT or 
DOS formatted, and has its write 
protection disabled. 
 Access to a computer with a USB port 
and internet access. 
Note: Do not use a USB hard drive. 
1. Press . 2. Select [Setup] > [Update software], then 
press...

  
EN      40       
Update [Help] 
 Do not switch off the TV or remove 
the USB storage device during the 
update. 
 If a power failure occurs during the 
update, do not remove the USB 
storage device from the TV. The TV 
continues to update as soon as power 
is restored. 
 If an error occurs during the update, 
retry the procedure. If the error 
reoccurs, contact Philips Consumer 
Care.   
1. Switch on the TV. 
2. Disconnect all other USB devices from the 
TV. 
3. Connect the USB storage device...