Philips 40PFS5501 Manual

did not sign in during the first TV installation, you can
always sign in later.
To sign in after you did the TV installation…
1 -  Press 
 , select  All Settings  and press  OK .
2 -  Select  Android Settings  and press  OK .
3 -  Press 
  (down) and select  Personal  >  Add
account  and press  OK .
4 -  Press  OK  on  SIGN IN .
5 -  With the remote control keyboard, enter your
email address and press the small  OK  key at the
right of the keyboard.
6 -  Enter your password and press the same
small  OK...

4
Connect Devices
4.1
About Connections
Connectivity Guide
Always connect a device to the TV with the highest
quality connection available. Also, use good quality
cables to ensure a good transfer of picture and
sound.
When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically
switches to the ideal TV settings when you switch to
this device in the Sources menu....

EasyLink HDMI CEC    
If your devices are connected with HDMI and have
EasyLink, you can operate them with the TV remote
control. EasyLink HDMI CEC must be switched On on
the TV and the connected device.
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
(Consumer Electronics Control) to communicate with
the connected devices. Devices must support HDMI
CEC and must be connected with an HDMI
connection.
EasyLink setup    
The TV comes with EasyLink switched...

Copy protection
DVI and HDMI cables support HDCP (High-bandwidth
Digital Content Protection). HDCP is a copy protection
signal that prevents copying content from a DVD disc
or Blu-ray Disc. Also referred to as DRM (Digital
Rights Management).
Y Pb Pr - Component
Y Pb Pr - Component Video is a high quality
connection.
The YPbPr connection can be used for High Definition
(HD) TV signals. Next to the Y, Pb and Pr signals add
the Audio Left and Right signals for sound.
Match the YPbPr (green, blue, red)...

Smart Card
Digital TV operators provide a CI+ module
(Conditional Access Module - CAM) and an
accompanying smart card, when you subscribe to
their premium programmes.
Insert the smart card into the CAM module. See the
instruction you received from the operator.
To insert the CAM in the TV…
1 -  Look on the CAM for the correct method of
insertion. Incorrect insertion can damage the CAM
and TV.
2 -  While looking at the back of the TV, with the front
of the CAM facing towards you, gently insert the CAM...

Switch Off Timer    
Switch off this automatic timer, if you only use the
remote control of the Set-top box. Switch this timer
off to prevent the TV from switching off automatically
after a 4 hour period without a key press on the
remote control of the TV.
For more information, in  Help , press the colour
key 
   Keywords  and look up  Switch Off
Timer  for more information.
4.4
Home Theatre System - HTS
Connect with HDMI ARC
Use an HDMI cable to connect a Home Theatre
System (HTS) to the TV. You can...

4 -  Select  Off .
5 -  Press 
  (left) repeatedly if necessary, to close
the menu.
Audio Out Offset
If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound. You
can set an offset that compensates for the time
necessary for the Home Theatre System to process
the sound of the TV picture. You can set the value in
steps of 5ms. Maximum setting is -60ms.
The  Audio Out Delay  setting should be switched on.
To synchronise the sound on the TV…
1 -  Press 
 , select  All...

4.6
Blu-ray Disc Player
Use a  High speed HDMI  cable to connect the Blu-
ray Disc player to the TV.
If the Blu-ray Disc player has EasyLink HDMI CEC,
you can operate the player with the TV remote
control.
4.7
DVD Player
Use an HDMI cable to connect the DVD player to the
TV.
Alternatively, you can use a SCART cable, if the
device has no HDMI connection.
If the DVD player is connected with HDMI and has
EasyLink CEC, you can operate the player with the TV
remote control.
For more information on EasyLink,...

speaker, in  Help , press the colour
key 
  Keywords  and look up  Speakers, Select .  
For more information on the Bluetooth On or Off
setting, in  Help , press the colour
key 
  Keywords  and look up  Bluetooth, On or
Off .
Select a Device
Once a wireless Bluetooth speaker is paired, you can
select it to play the TV sound.
To select a speaker to play the TV sound…
1 -  Press 
 , select  Speakers  and press  OK .
2 -  Select the loudspeaker system you want and
press  OK .
3 -  Press 
  (left)...

Best Setting
Before you start playing a game from a connected
game console, we advice you to set the TV in the
ideal setting  Game .
When you finish playing a game and start watching
TV again, remember to switch the  Game or
Computer  setting back to  Off . 
To set the TV to the ideal setting…
1 -  Press 
 , select  All Settings  and press  OK .
2 -  Select  Picture  and press 
  (right) to enter the
menu.
3 -  Select  Advanced  >  Game or Computer , and
select the device type you want to use. To...