Philips 32pfl9632d User Manual

							 
 
 - 1 -  
 
 
 
 
 
 
 
 
 
 
Hospitality Television 
 
32HF9385D/42HF9385D 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
						

							 
 
 - 2 -  
 
Installation of your Philips Hotel TV  
 
 
1. Introduction 
 
This addendum has been designed to help you install programmes on this Digital TV and activating the hotel 
mode.  
Use this addendum in conjunction with the User Manual of this television. 
 
 
Please handle the TV with care and wipe with a soft cloth to ensure your TV keeps looking new. 
 
 
 
2.  The benefits of the Philips hotel TV 
 
This TV is specially designed for hotels.  The Philips hotel TV offers all kind of features to  
Maximise the convenience for the hotel and meet the needs for the guest 
 

						

							 
 
 - 3 -  Installing Analogue Programs  
 
Ensure the TV is in Analogue mode. If it is in Digital mode, press the A/D (Analogue/Digital) key on the 
Remote Control to enter the Analogue mode. 
 
1. Press the 
 (Menu TV) key on the Remote Control 
2.  Press the Up/Down Arrow Key to scroll to the item called INSTALL and press OK 
3.  Press the Up/Down Arrow Key to scroll to the item AUTO STORE and press OK 
 
The TV will now start to scan and install all available (Analogue) TV channels automatically. This operation will 
take a few minutes. The TV display will show the progress of the scan and the number of programmes found. 
 
Refer to the chapter on 
Automatic Tuning of Analogue Programmes in the User Manual for more details. You 
can also refer to the chapter on 
Manual Tuning of Analogue Programmes in the User Manual if a manual scan is 
preferred. 
 
 
4.  Activating the Hotel Mode Setup menu (BDS) 
 
1.  Switch on the television and select an analogue channel 
2.  On the Remote Control, press keys: [3, 1, 9, 7, 5, 3, MUTE] 
3. The BDS HOTEL MODE SETUP MENU becomes visible 
4.  Use the cursor keys to select and change any of the following settings: 
 
Function Possible selections 
BDS MODE  ON /OFF 
SWITCH ON SETTINGS  
SWITCH ON VOLUME  0-100, LAST STATUS 
MAXIMUM VOLUME  0-100 
SWITCH ON CHANNEL  USER DEFINED, LAST STATUS 
POWER ON  ON/STANDBY/LAST STATUS 
DISPLAY MESSAGE  ON/OFF 
WELCOME MESSAGE  LINE 1/LINE 2/CLEAR 
CONTROL SETTINGS  
LOCAL KEYBOARD LOCK  ON/OFF/ALL 
REMOTE CONTROL LOCK  ON/OFF 
OSD DISPLAY  ON/OFF 
HIGH SECURITY MODE  ON/OFF 
AUTO SCART  ON/OFF 
MONITOR OUT  ON/OFF 
BLANK CHANNEL  ON/OFF 
STORE > 
 
5. Select “STORE” and press [CURSOR RIGHT] to save the settings and exit BDS Hotel Mode 
setup. Press [MENU] to exit without saving. 
6.  For BDS Hotel Mode settings to take effect, you must turn the TV set Off, then back On. 
 
BDS Hotel Mode Functions 
 
This paragraph describes the functionality of each item in the BDS Hotel Mode Setup menu. 
 
BDS MODE
 
ON  BDS Hotel Mode is ON: 

						

							 
 
 - 4 -  OFF  BDS Hotel Mode is OFF: 

						

							 
 
 - 5 -   
HIGH SECURITY MODE
 
ON  Allows access to the BDS Hotel Mode Setup Menu via the special BDS Setup Remote only. 
(RC2573/01) 
OFF  Allows access to the BDS Hotel Mode Setup Menu via BDS Setup Remote or via normal Remote 
Control (using special key code sequence). 
 
AUTO SCART
 
The Auto Scart function enables auto-detection of AV devices that are connected to the TV’s Scart connector. 
ON  Enables Auto Scart switching in BDS Hotel Mode. 
OFF  Disables Auto Scart switching in BDS Hotel Mode. 
 
MONITOR OUT
 
ON  Allows audio & video output from TV via relevant AV connectors (if available). 
OFF  Disables both Audio & Video output from the TV (to prevent illegal copying). 
 
BLANK CHANNEL
 
The Blank Channel function disables the display of video on the TV, but does not affect the audio output. This 
function can be used for audio applications (example: Off-air radio transmission, music channels, and so on), 
which do not necessarily require the display of video. 
ON  The current programme is blanked 
OFF  The current programme is not blanked (normal visible; DEFAULT value) 
 
BLANK CHANNEL can be set for every channel. Use [P+ / P-] to go through all the programmes and set the 
desired status per channel. The programme number is visible in the top left corner. 
 
Low Battery Check 
 
This television set has a special feature which checks the battery power level of a TV Remote Control, and 
indicates if the battery is low and requires changing. 
(Note: The Low Battery Check function works only with certain models of Remote Controls. Please check 
with the Philips sales representative if the Remote Control used with this TV supports this function) 
 
To activate the Low Battery Check function, hold the TV Remote Control in front of the TV, and press and 
hold the OK button on the Remote Control for at least 5 seconds. A message will appear on the TV screen to 
indicate if the battery power level is OK, or if it is Low. If the message indicates that the battery level is low, it 
is recommended to change the batteries of the Remote Control immediately. 
 
 
5.  Cloning of settings 
 
Cloning of analogue TV channels and TV settings as described in the chapter 
Hotel Mode Set-up menu 
 
For 15/20HF5234   
o Wireless cloning with the SmartLoader 22AV1120 or 22AV1135 
o Cloning off all adjustable TV settings + analogue channel table 
 
For 20/26/32HF5335D 
o Wired cloning with the SmartLoader 22AV1135 using the wire packed with the SmartLoader 
o Cloning off all adjustable TV settings + analogue channel table (digital channel table via automatic 
installation) 
 
 
Instruction for cloning of settings between TVs 
Philips SmartLoader (22AV1135/00) 
 
 
The Philips SmartLoader is an installation tool especially designed for easy and fast installation and copying of 
TV settings on Philips Institutional TV’s. 
 
						

							 
 
 - 6 -  The Philips SmartLoader works in 2 modes – Wireless and Wired: 
 
Wireless mode ---- through infrared sensor (15/20HF5234) 
Switch the SmartLoader to “Wireless” mode by sliding the side-switch to the   icon on the SmartLoader 
device. Point the Wireless SmartLoader to the TV’s infrared receiver (optimal distance of 5-30cm) and proceed 
with the Installation procedure listed below. 
 
Wired mode ---- using the by-packed accessory cable(s) (20/26/32HF5335D) 
Switch the SmartLoader to “Wired” mode by sliding the side-switch to the   icon on the SmartLoader 
device. 
 
Examine the rear connectors of the TV set to determine if the 3-pin or 4-pin female connector wire (packed 
with the Wireless SmartLoader) should be used. Plug in the correct connector wire to the corresponding 
opening on the TV set (usually marked as SERV C), and then connect the RJ11 jack end of the accessory wire 
to the RJ11 socket on the SmartLoader.  
 
The Installation Procedure consists of three simple steps: 
 
1.  Choosing a Master TV 
 
The Master TV is the TV set whose installation and configuration settings are to be copied into other TV’s (of 
the same type only). 
 
2.  Programming the SmartLoader with the settings from the Master TV 
 
Follow these steps to program the SmartLoader with the settings of the Master TV. 
 
a) Wireless method 

						

							 
 
 - 7 -  a) Wireless method 

						

							 
 
 - 8 -   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2007© Koninklijke Philips Electronics N.V. all rights reserved 
Specifications are subject to change without notice 
Trademarks are property of Koninklijke Philips Electronics N.V. or their respective owners.
 
Disposal of your old product. 
Your product is designed and manufactured with high quality materials and 
components, which can be recycled and reused. When this crossed-out wheeled bin 
symbol is attached to a product it means the product is covered by the European 
Directive 22002/96/EC. Please find out more about the separate collection system for 
electrical and electronic products in your local neighborhood. 
Please act according to your local rules and do not dispose of your old products with 
your normal household waste. The correct disposal of your old product will help 
prevent potential negative consequences for the environment and human health.
 
The packaging of this product is intended to be recycled. Apply to the 
local authorities for correct disposal.
 
 
						

							Tiecieties ar Philips Internetâ
http://www.philips.com
32PFL9632D
Lietoðanas instrukcija
 
						

							PIEZÎMÇM