Philips 32pfl9606t User Manual

Reset   a  Smart   setting
To  reset   a  Smart  setting  to  its  original   values,  select  the   Smart
setting  you   want   to  reset   in   the   ADJUST   menu.  Then   press   h
>  Setup  > TV  settings  > Picture,  select Reset,  press   OK and
confirm.
Read  more   about   using  Smart  picture   and  sound   settings   in   Help
>  Basics  > Watch  TV  > Smart   picture  and  sound   settings .
ISF  Calibration
Get   the   most  out   of   your   HD   TV   display   with   ISF  Calibration.
An...

4.2Ambilight
Placement
For  the   best  Ambilight  effect   :
•   Dim   the   lighting   conditions   in   the   room  and  position   the   TV
up  to  25  cm  away  from  the   wall.
•   Adjust  Ambilight  according  to  the   colour  of   your   wall  at  home
in   the   Wall   colour  setting.
•   To   prevent   poor   infrared  remote   control   reception,   position
your   devices  out   of   sight  of   Ambilight.
Adjust
To   open   the   Adjust  menu,  press   t  ADJUST .
To   close,   press   t...

You   can   also  set   up  the   colour  scheme  in   the   Setup   menu.
With   the   TV   switched   on,  press  h  and  select  Setup.  Select   TV
settings  > Ambilight  > Lounge   light   mood .  Select   the   colour
scheme  with   which  Lounge   light   will   start   up.
Setup   /   Ambilight43
 

4.3Channels
Reorder and rename
You   can   reorder   and  rename  channels   in   the   Channel   list.
To   reorder   or  rename  a  channel,   read  Help > Basics  > Watch
TV  > Channel  list .
Update channels
The  TV   puts  all   installed   channels   in   the   Channel   list.  If   you
receive   digital   channels,  you   can   set   the   TV   to  automatically
update   the   list   with   new   channels.  You   can   also  start   an   update
of   the   Channel   list   yourself.
Automatic...

If   you   want   to  change  the  DVB  setting  to  start   a  new   channel
installation,   press   h > Setup  > Channel  settings   and  press  OK.
Select   Channel  installation > Antenna  or   Cable  DVB   and  press
OK .  Select   the   DVB  setting  you   want.
DVB -C   channel  installation
For  ease  of   use,   all   DVB-C   settings   are   set   to  automatic.   If   your
DVB-C   provider  gave  you   specific   DVB-C   values,  like   a  symbol
rate  or  a  frequency,   enter  these  values...

4.4Satellite channels
Introduction
As   well   as   the   DVB-T   and  DVB-C   reception,   this   TV   has   a  built -
in   satellite   DVB -S   receiver .  With   a  satellite   dish  antenna
connected,  you   can   receive   digital   satellite  channels.  You   do   not
need  an   external  satellite   receiver.
LNB
An   LNB   (Low   Noise   Block-downconverter)   captures  the   signals
from  a  satellite   and  is  mounted   at  the   end   of   the   pole   on   the
dish  antenna.   The  TV   can...

To  remove   a  satellite,  press   h > Setup  > Search   for  satellite .
Select   Remove  satellite   and  press  OK.  Select   the   satellite   you
want   to  remove   and  press   OK.  To   confirm,   select  Yes  and  press
OK .  The  satellite   and  its  channels   are   removed  from  the
installation.
Update channels
If   satellite   channels   are   already   installed,  you   can   update   the
channel  list   with   possible   new   channels   from  all   installed   satellites.
To   update...

4.5Network
Benefits
Browse  PC
If   you   connect   the   TV   to  a  home   network,   you   can   play  photos,
music  and  videos   from  your   computer  or  storage  device.   Once
the   network   is  installed   on   the   TV,   you   can   find  and  play  the   files
from  your   PC  on   the   TV   screen.
Net   TV
If   you   connect   the   TV   to  a  home   network   with   an   Internet
connection,  you   can   link  up  the   TV   to  Net  TV.   Net  TV   offers
Internet  services   and...

What  you   need
To   use  Wi-Fi  MediaConnect,  you   need  to  connect   the   TV   to
your   home   network.   You   need  a  wireless  router.
Read  more   about   connecting   to  a  network   in  Help > Setup  >
Network .
Install  Wi -Fi   MediaConnect
1   On  your   PC,   go  to  www.philips.com/wifimediaconnect
2   On  the   website,  check   the   necessary  PC  system   requirements.
3   Enter  the   code   printed   on   the   product  introduction   booklet.
4   Click   the   Download   now...

4.6Devices
EasyLink HDMI- CEC
With   EasyLink   HDMI -CEC  your   TV   and  the   connected   devices
can   work   together.  You   can   use  the   TV   remote   control   to
operate  EasyLink   devices.   The  device   needs  to  be  connected   with
an   HDMI   cable.  Devices  with   EasyLink   appear   automatically  in   the
Home  menu.
Setup
The  TV   comes   with   EasyLink   switched   on.
Make   sure  that  all   HDMI -CEC  settings   are   properly  set   up  on
the   connected   EasyLink...