Philips 32pfl7403s User Manual

							Use more of your TV19
ENGLISH
5.7 Timers and locks
This section describes how to switch the TV on or
off at a specified time and to lock or unlock the TV.
5.7.1 Automatically switch to standby
Sleeptimer switches the TV to standby after a time.
‡Press  Menu on the remote control and select
Features >  Sleeptimerand press πto enter
the sleeptimer bar.
® Press  oor œ to set the time up to 180
minutes in steps of 5 minutes. If set to 0
minutes, the Sleeptimer is switched off.
Y ou can always switch off your TV earlier or reset
the time during countdown.
5.7.2 Automatically switch the TV on
On timer switches the TV on automatically to a
specified channel at a specified time, from standby.
‡ Press  Menu on the remote control and select
Features >  On timerand press  πto enter the
On timer menu.
® Use  por π,o or œ to select and enter the
menu items one by one to set a channel, a day
of the week or daily, and a star ting time.
Ò Press 
OKto confirm.
† Press  Menu to quit the menu.
à Tip
To  switch off the On timer, select  Offin the On
timer menu.
5.7.3 Lock TV channels and programmes
Lock TV channels and/or programmes from
connected devices to prevent children from
watching them. Lock and unlock with a four number
code.
Set or change your code
‡ Press  Menu on the remote control and select
Features >  Set or Change code and press πto
enter your code.
® Enter your code with the number keys.
The  Features menu reappears with a message
confirming that your code has been created or
changed.
Did you forget your code ?
‡ Select  Change code .
® Press  π. Ò
Enter the overriding code 8-8-8-8.
† Enter a new personal code.
º Confirm your new entered code.
The previous code is erased and the new code
is stored.
5.7.4 Activate or deactivate Child lock
Set your code and you can:
•Lock all channels and devices,
• Lock specific channels and devices,
• Set a time after which all channels and devices
are locked,
• Set the maximum allowed parental rating for
digital channels that are installed and broadcast.
‡ Press  Menu.
® Select Features >  Child lockand press π.
Ò Enter your code with the number keys.
† Select one of the options.
º Press  π.
Lock or unlock all channels and connected devices
‡ Select  Lockor Unlock .
Lock a certain programme or all channels from a
certain time
‡ Select  Custom lock .
® Press  πto enter the Custom lock menu.
Ò Press  πagain to enter the Lock after menu.
† Select  Onto switch on the Timer lock.
º Press  p.
◊ Select  Time.
‹ Press  π.
≈ Enter the time with  oor œ and  π.
Ú Press 
OK.
Lock one or more channels and connected devices
‡ Select  Custom lock .
® Press  πto enter.
Ò Press  oor œ to select  Channel lock .
† Press  π.
º Press  oor œ to select the channel(s) you
want to lock or unlock.
◊ Each time press 
OKto lock or unlock the
channel.
Child lockCustom lock
Lock after
Channel lock
Parental rating
Lock
Custom lock
Unlock
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 19
 
						

							20Use more of your TV
Set an age rating to a digital programme
Some digital broadcasters have their programmes
rated (depending on your countr y). When the
r ating is higher than your child’s age, the
programme will be locked.
‡ Select  Custom lock .
® Press  πto enter.
Ò Press  oor œ to select  Parental rating .
† Press  π.
º Press  oor œ to select an age rating.
◊ Press  Menu to quit the Child lock menu.5.8 Subtitles
For each TV channel, subtitles can be set, coming
from Teletext or DVB-T (digital) broadcasts.
If digital channels are installed and broadcasted, you
can select your preferred subtitle language.
5.8.1 Subtitling from analogue TV channels
‡Select an analogue TV channel.
® Press  Teletext to switch on Teletext.
Ò Enter the three number pagenumber of the
subtitle page.
† Press  Teletext to switch off Teletext.
r Note
The Teletext subtitle page of analogue channels
m ust be stored for each TV channel separately.
5.8.2 Activate or deactivate subtitling
‡ Press  Menu on the remote control and select
Features >  Subtitleand press  πto enter the
list.
® Press  oor œ to select  Onto show the
subtitles always or  On during muteto show the
subtitles only when the sound is muted with the
¬ key on the remote control.
Ò Press  pto return to the Features menu.
5.8.3 Select a digital subtitle language
If subtitle broadcasting is available with digital
channels, you can select a preferred subtitle
language out of a list of broadcasted languages. The
preferred subtitle languages set in the Installation
menu are overruled temporarily.
‡ Press  Menu  on the remote control and select
Features >  Subtitle language and press πto
enter the list of available languages.
® Press  oor œ to select a subtitle language.
Ò Press 
OK.
TVmenuFeatures
Subtitle
Subtitle language
Sleeptimer
Child lock
Set/Change code
On timer
Demo
Features
Installation
Software update
TVsettings
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 20
 
						

							Use more of your TV21
ENGLISH
5.9 View and play: photos,
MP3, ...
Watch pictures or listen to music stored on a USB
device (not supplied with the TV). Watch your
pictures as a slideshow or listen to a self made
m usic playlist.
r Note
Philips can not be held responsible if your USB
device is not suppor ted nor shall Philips accept any
liability for damage or loss of stored data. See
section  8 Technical  data for the playback formats
suppor ted.
5.9.1 Insert a USB device
Inser t a device at the side of the TV while the TV is
switched on.
The main menu appears automatically and the
name of the USB device is highlighted next to
Multimedia .
5.9.2 Remove the USB device
çCaution
To  av oid damaging the USB device always quit the
menu on screen and wait five seconds before you
remove the USB device.
‡ Press  Menu to quit the menu.
® Remove the USB device.
5.9.3 View your pictures
The Multimedia menu shows the files you have
stored on your USB device.
‡Press  πto enter the Multimedia menu.
Picture is highlighted.
® Press  π to enter the Picture folder.
Ò Press  oor œ to select a picture or a picture album on the USB device.
† Press 
OKto view the picture or to star t a
slideshow of the pictures in the album.
º Press 
OKto pause the slideshow. Press again to
restar t.
◊ Press one of the colour keys on the remote
control to perform the corresponding function
shown at the bottom of the screen.
Press the blue key to stop the show and to see
more functions.
If the function bar at the bottom disappeared,
press any colour key to let it reappear.
‹ Press  pand select another picture or another
album.
Slideshow settings
• Details / More details
Shows the picture name, date, size and next
picture in the slideshow.
• Transitions
Shows the list of available transition styles of the
pictures.
Press navigation key up or down to select and
press 
OKto activate.
• Slide time
Sets the time lag for the picture transitions:
Shor t, Medium or Long.
• Rotate
To  rotate a picture.
• Zoom
Show a list of available zoom magnifications to
select.
• Start/Show
To  stop and restar t the slideshow.
5.9.4 Thumbnails
View the pictures of a selected album in an
ov er view.
USBPicture
Afrika_2001
Paris_2006
My_car.jpg
Jean.jpg
Mary.jpg
Music
Picture
Television
Multimedia
TVmenu
Channel list
Programmeguide
Jean.jpg
Mary.jpg
PictureAfrika_2001
Kenya.jpg
Congo.jpg
Victoria.jpg
Cairo.jpg
Paris_2005
My_car.jpg
Afrika_2001
Afrika_2001Afrika_2001
Kenya.jpg
Congo.jpg
Victoria.jpg
Dakar.jpg
Cairo.jpg
Kenya.jpg
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 21
 
						

							22Use more of your TV
‡Select a picture album.
® Press  πto enter the picture list.
Ò Press the green key.
† Press  o,œ ,p  ,π to highlight a picture.
º Press 
OKto view the picture.
◊ Press  pto return to the thumbnail over view.
‹ Press the green key again to go back to the
picture list.
Listen to music
Find your songs in the Music album of the
Multimedia menu.
‡Highlight  Musicin the Multimedia menu.
® Press  πto enter the Music folder.
Ò Press  oor œ to select a song or a music
album.
† Press 
OKto play the selected song or to play a
song followed by the next song in the same
album.
Music settings
• Details
Shows the file name.
• Repeat one/all
Repeat all songs in the album until you stop a
song or only repeat the one song selected until
you stop the song.
• Shuffle
Play songs in a random sequence.
Slideshow with background music
W atch a slideshow of your stored pictures
accompanied with your stored background music.
‡ Select an album of songs first and press 
OK.
® Highlight the Picture folder and select an album
of pictures and press 
OK.
5.10 Listen to digital radio
channels
If digital broadcasting is available, digital radio
channels are installed during installation.
To listen to a digital radio channel:
‡ Press 
OKon the remote control.
The  All channels menu is displayed.
® Use the number keys to select a radio channel
available from channel number 400 onwards.
To  reorder see section  6.3.3 Reorder the
channels .
Ò Press 
OK.
USBAfrika_2001—Kenya.jpg—
Kenya.jpg
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 22
 
						

							Use more of your TV23
ENGLISH
5.11 Software update
Philips continuously tries to improve its products. It
may be recommended for you to update the TV’s
software. To update your TV software you need a
USB Memor y device (not supplied).
rNote
The device must have at least 48Mb free space.
Make sure the write protection is turned off.
Some USB devices do not work with our TV.
Contact your dealer.
5.11.1 Update assistant
The Update assistant helps you to update the TV’s
software.
TV identification
The TV will identify itself to your USB memor y
device.
‡ Switch the TV on.
® Press  Menu.
Ò Press  π.
† Press  oor œ to select  Software update .
º Press  π.
◊ Press  oor œ to select  Update assistant .
‹ Press  π.
≈ Press 
OKto activate.
Ú Inser t a USB memor y device to the USB
connector at the side of the TV.
The main menu appears.
œ Press the green key to proceed.
A message appears the TV has successfully
written the identification file to the USB
memor y device.
π Press the green key again to finish.
Y Remove the USB memor y device from the TV.
5.11.2   Software download from the PC
to the USB device
‡ Inser t the USB memor y device into a PC linked
to the internet.
® Locate and open the file “update.htm” on your
USB device.
Ò Read the instructions on screen and click on
the  Send
IDbutton.
The software update is downloaded on the
USB memor y device.
† Remove the USB memor y device from your
PC .
5.11.3  Transfer of the downloaded
software update to the TV
The downloaded software on the USB memor y
device must now be uploaded to your TV.
ç Caution
• Do not remove the USB memor y device during
the software update.
• If a power drop occurs during the update, do not
remove the USB memor y device from the TV.
The TV will continue the update as soon as the
power comes back.
‡ Inser t the USB memor y device to the USB
connector at the side of the TV.
® The TV switches off. The screen stays black for
about 10 seconds. Wait and do not use the
power switch  Bon the TV.
TVmenuSoftware update
Current software...
Update assistant
Local updates
Announcement
Features
Installation
Software update
TVsettings
B
S
U
B
SU
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 23
 
						

							24Use more of your TV
ÒThe update process star ts automatically. Please
wait.
The update is finished when the message
‘ Operation successful ’appears on the screen.
† Remove the USB memor y device from the TV.
º Press  Bon the remote control.
r Note
Do not press more than once and do not use the
Power Bswitch on the TV. ◊
The TV switches off. The screen stays black for
about 10 seconds. Please, wait.
‹ The TV switches back on again. The update is
done.
5.11.4 Verify the current software version
Updating software is only possible if the version of
the new available software is different from the
current one. You can verify your current software
ve rsion.
‡ Select  Software update in the TV menu.
® Press  π.
Ò Press  oor œ to select  Current software info .
The version and the description of the current
software appears.
5.11.5  Software update by digital broadcast (DVB-T)
Y our TV might receive new software from the
digital broadcast system automatically.
If you receive an update message on screen it is
strongly advised to update the software
immediately - select  Now.
Select  Later,if you want to be reminded later on.
Select  Cancel to quit the update (not
recommended). If you cancelled the update you can
still update yourself from the TV menu > Software
update > Local update.
BSU
Operation Successful! Re
Prg
BSU
B
S
U
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 24
 
						

							25
ENGLISH
Channel installation
6Channel installation
The first time you switched on your TV you’ve
selected the language of the TV menus and allthe
available channels have been installed.
This chapter will help you if you find it necessar y to
re-do the initial installation or if you want to tune in
a new analogue TV channel.
r Notes :
-Y ou do not have to follow ever y step described if
it is not necessar y.
- Re-installation will modify the All channels list and
new added channels will not be added to any
favourite list.
6.1 Automatic installation
This section describes how to search for and store
all available channels automatically.
Step 1 Menu language  
Sets the language of the TV menus.
Go to a next step if your language settings are
correct.
‡ Press  Menu on the remote control and select
TV menu > Installation >  Languagesand press
π to enter  Menu language .
® Press  oor œ to select your language.
Ò Press 
OKto confirm.
† Press  pto return to the Installation menu.
The Languages menu also offers the following
language settings when digital channels are installed
and broadcasted.
• Preferred audio 
Select one of the available audio languages as
preferred language.
• Preferred subtitles
Select one of the available subtitle languages as
preferred language. See section  5.8 Subtitles.
• Hearing impaired
Select  Onto display the hearing impaired subtitle
ve rsion of your preferred audio or subtitle
language when available.
Step 2 Time zone selection
‡ Press  œto select  Time zone .
® Press  πto enter the list.
Ò Press  oor œ to select your time zone.
† Press  pto return to the Installation menu.
Step 3 Install TV and radio channels
Your TV will search for and store all available digital
and non-digital TV channels and all available digital
r adio channels.
‡ Press  œto select  Channel installation .
® Press  πto enter the Channel installation menu.
Automatic installation is highlighted.
Ò Press  πto select  Start now .
† Press 
OK.
º Press the green key to star t.
The installation may take a few minutes.
◊ When the channel search is completed, press
the red key to return to the Installation menu.
‹ Press  Menu to quit the TV menu.
à Tip
When digital TV channels are found, the list of
installed channels may show some empty channel
n umbers.
If you want to rename, reorder or uninstall stored
channels, see section  6.3 Rearrange channels .
InstallationLanguages
Menu language
Preferred audio
Preferred subtitles
Hearing impaired
Languages
Ti me zone
Channel install...
Preferences
Connections
Factory settings
InstallationTi me zone
New South Wales...
Victoria
Queensland
South Australia
Western Australia
Tasmania
Northern Territory
Ti me zone
Channel install...
Preferences
Connections
Factory settings
Languages
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 25
 
						

							26Channel installation
6.2Analogue: Manual installation
You can tune-in analogue TV channels channel by
channel manually with Manual installation.
6.2.1 Select the system
‡ Press  Menu on the remote control and select
TV menu > Installation > Channel installation >
Analogue: Manual installation .
® Press  π to enter the Manual installation menu.
System is highlighted.
Ò Press  πto enter the System list.
† Press  oor œ to select your TV system: PAL
BG 5.5 MHz, PAL I 6.0 MHz, PAL DK 6.5 MHz
or NTSC M 4.5 MHz.
º Press  pto return to the Manual installation
menu.
6.2.2 Search for and store a new channel
‡ Press  Menu on the remote control and select
TV menu > Installation > Channel installation >
Analogue: manual installation >  Search.
® Press  πto enter the Search menu.
Ò Press the red key to enter the frequency
yourself or press the green key to search for a
next channel.
à Tip
If you know the frequency, enter the three numbers
of the frequency with the number keys of the
remote control.
† Press  pwhen the new channel has been
f ound.
º Select  Store as new channel to store the new
channel under a new channel number.
◊ Press  πto enter.
‹ Press 
OK.
Done appears.
≈ Press  Menu to quit the channel installation
menu.
6.2.3 Fine tune a channel
Fine tune a found channel when the reception is
poor.
‡ Press  Menu on the remote control and select
TV menu > Installation > Channel installation >
Analogue: manual installation >  Fine tune.
® Press  πto enter the Fine tune menu.
Ò Press  oor œ to adjust the frequency
† Press  p when you finished fine tuning.
º Select  Store current channel to store the fine
tuned channel under the current channel
n umber.
◊ Press  πto enter.
‹ Press 
OK.
Done appears.
≈ Press  Menu to quit the Channel installation
menu.
6.3 Rearrange stored channels
To  rename, reorder, uninstall or reinstall stored
channels.
6.3.1 Rename a channel
Assign or change a channel name to a channel for
which a name has not yet been entered.
‡ Press  Menu on the remote conrol and select TV
menu > Installation > Channel installation >
Rearrange .
® Press  π to enter the channel list.
Ò Press  oor œ in the channel list to select the
channel you want to rename.
† Press the red key.
º Press navigation key  por π to select a
character or  oor œ to change the characters.
Space, numbers and other special characters
are located between  zand  A.
◊ Press the green key or 
OKto finish.
à Tip
With the yellow key all characters can be deleted.
With the blue key you can delete the character
which is highlighted.
Channel install...Analogue: Manual...
System
Search
Fine tune
Store as new ch...
Automatic install...
Installation update
Digital: Test recept...
Rearrange
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 26
 
						

							27
ENGLISH
Channel installation
6.3.2 Uninstall or reinstall a channel
To uninstall a stored channel so that it is no longer
possible to tune to.
Reinstall an earlier uninstalled channel.
‡Press Menuon the remote conrol and select TV
menu > Installation > Channel installation >
Rearrange.
®Press π to enter the channel list.
ÒPress oor πin the channel list to select the
channel you want to uninstall or reinstall.
†Press the green key to uninstall or reinstall the
channel.
ºPress Menuto quit the  menu.
6.3.3 Reorder the channels
Change the order of the stored channels.
‡Press Menuon the remote conrol and select TV
menu > Installation > Channel installation >
Rearrange.
®Press π to enter the channel list.
ÒPress oor œin the channel list to select the
channel you want to reorder.
†Press the yellow key to move up the highlighted
channel in your channel list.
ºPress the blue key to move down the
highlighted channel in your channel list.
◊Press Menuto quit the menu.
6.4 Automatic 
channel management
Once a day, at 5 AM, all available TV channels are
updated automatically. The update is done if your
TV is in standby.
Earlier stored channels not found by the update will
be removed from the channel list.
You can do this update yourself anytime.
‡Press Menuon the remote control and select
TV menu > Installation > Channel installation >
Installation update.
®Press π to enter the Installation update menu.
ÒPress 
OK.
†Press the green key to star t.
The update star ts and may take a few minutes.
ºWhen the update is completed, press the red
key to return to the Channel installation menu.
◊Press Menuto quit the menu.
6.5 Digital reception test
If you receive Digital TV broadcasting you can check
the quality and signal strength of a specific channel.
‡Select a channel.
®Press Menuon the remote control and select
TV menu > Installation > Channel installation >
Digital: Test reception.
ÒPress πto enter
†Press 
OK.
The channel frequency, the network name, the
signal quality and strength appear.
ºPress the green key to star t or directly enter
the frequency of the channel you want to test.
If the signal quality and strength are poor,
reposition the antenna.
◊Press the yellow key to store the frequency if
the signal quality and strength are good.
‹Press the red key to return to the Channel
installation menu.
≈Press Menuto quit the menu.
àTip
To achieve the best results, contact a specialised
antenna installer.
6.6 Factory settings
If you are lost in the picture and sound settings, you
can reset the TV to the factor y settings of picture
and sound.
‡Press Menuon the remote control and select
TV menu > Installation > Factory settings.
®Press π to enter the Factor y settings menu.
ÒPress 
OK.
†Press Menuto quit the menu.
rNote
The channel installation settings are not changed.
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 27
 
						

							28Connections
7Connections
7.1 Connection overview
Back connectors
1EXT 1
First SCART connector for DVD players, VCRs,
digital receivers, game consoles and other SCART
devices. Suppor ts Audio L/R, CVBS in/out, RGB.
2 EXT 2 
Second SCART connector. Suppor ts Audio L/R,
CVBS in/out, RGB.
3 EXT 3
Component video (Y Pb Pr) and Audio L/R input
connectors for DVD players, digital receivers,
game consoles and other component video
devices.
4 SPDIF OUT
SPDIF sound output connector for home theatres
and other audio systems.
5 AUDIO OUT L/R
Sound output cinch connectors for home
theatres or other audio systems.
6 TV ANTENNA 
7 HDMI 1/2/3
HDMI input connectors for Blu-ray Disc players,
digital receivers, game consoles and other high-
definition devices.
r Note
The number of HDMI connectors available may
var y according to your TV model. 8A
UDIO IN
Mini-jack connector for PC audio in (when
connecting a PC via a DVI-HDMI adaptor).
Side connectors
9 Headphones
Stereo mini-jack.
10 AUDIO L/R
Audio L/R input connectors for composite and
S-Video devices.
11 VIDEO
Video input cinch connector for composite
devices.
12 S-VIDEO
S-Video input connector for S-Video devices.
13 USB
USB connector for storage devices.
14 HDMI
Additional HDMI connector for mobile high-
definition devices.
15 COMMON INTERFACE
Slot for Conditional Access Modules.
Not currently suppor ted by ser vice providers in
Australia.
2727.1_AUS.qxd  21-04-2008  10:23  Pagina 28