Philips 32pfl6505h User Manual

							     
EN           21   
English
 
 [Custom]: Allows you to customize 
and store personal picture settings. 
3. Press OK to confirm your choice. 
4. Press  to exit.  
Use Smart sound settings NonPu bl i sh 
Use the [Smart sound] experience menu to 
access frequently-used sound settings. 
1. While watching TV, press . 2. Select [Smart sound], then select one of 
the following settings: 
 [Personal]: Sets the TV to your 
personal preferences set in the [Sound] 
menus in [Setup]. 
 [Standard]: Adjusts sound settings to 
suit most environments and types of 
audio. 
 [News]: Applies sound settings ideally 
suited for spoken audio, such as the 
news.     [Movie]: Applies sound settings ideally 
suited for movies. 
 [Game]: Ideal settings for gaming. 
 [Drama]: Applies sound settings ideally 
suited for drama. 
 [Sports]: Applies sound settings ideally 
suited for sports. 
3. Press OK to confirm your choice. 
4. Press  to exit.  
Change picture format NonPu bl i sh 
Change the picture format to suit your 
viewing experience. 
1. Press . 2. Select a picture format, then press OK to 
confirm. 
Note: You can access picture formats via the 
experience menu  and the [Setup] menu. 
The following picture formats can be 
selected: 
 [Auto fill]: Automatically enlarges the 
picture to fill the screen. Minimal 
picture distortion, subtitles remain 
visible. Not for PC input. 
 [Auto zoom]: Automatically zooms the 
picture in to fill the screen as much as 
possible, without distortion. Black bars 
may be visible. Not for PC input. 
 [Super zoom]: Removes the black bars 
on the sides of 4:3 broadcasts. Not for 
HD or PC.     [Movie expand 16:9]: Scales the classic 
4:3 format to 16:9. Not recommended 
for HD or PC. 
 [Wide screen]: Stretches the classic 4:3 
format to 16:9. 
 [Unscaled]: Provides maximum detail 
for PC. Only available when [PC mode] 
is enabled in the [Picture] menu.   
Notes:  
 Depending on the picture source, some 
picture formats are not available and 
will not be seen on-screen.  
Watch a connected device 
Add new device NonPu bl i sh 
Notes:  
 Before watching a connected device, 
you must add it to the home menu. 
 HDMI ARC compliant devices connected to the HDMI ARC 
connector on the TV are automatically 
added to the home menu. 
1. Connect and switch on the device. 
2. Press . 3. Select [Add your devices], then press 
OK. Follow the on-screen instructions.   
Watch connected device NonPu bl i sh 
1. Press . 
2. Select the device from the home menu. 3. Press OK to confirm your choice.  
 
						

							  
EN           22           
Use Ambilight 
Switch on Ambilight 
(Available on certain models only.) 
Enjoy a more relaxed viewing experience 
and improved perceived picture quality. Dim 
the lighting conditions in the room for the 
best Ambilight effect. 
Caution 
To avoid bad infrared remote control 
reception, place your devices out of sight of 
Ambilight. 
1. Press  (Experience). 
2. Select [Ambilight], then press OK. 
3. To switch Ambilight on or off, select [On] 
or [Off].   
You can also press  on the TV to switch 
Ambilight on or off. 
  
Setup Ambilight 
(Available on certain models only.) 
In the Ambilight menu, you can access more 
Ambilight settings. 
While watching TV, press  > [Setup] > 
[TV settings] > [Ambilight].  
Select a setting to adjust: 
 [Dynamic]: Adjusts Ambilight between 
relaxed and dynamic levels. Available only if Ambilight [Colour] is set to 
[Dynamic]. 
 [Brightness]: Adjusts the brightness of 
Ambilight.       [Colour]: Selects a predefined color. 
 [Custom colour]: Set your own 
Ambilight colour. To access this option, set [Ambilight] > [Colour] > 
[Custom]. 
 [Separation]: Adjusts the difference in 
color levels between each side of the 
TV. Turn off this feature for a dynamic 
and uniform Ambilight color. 
 [TV switch off]: Selects how Ambilight 
switches off when the TV is switched 
off.    [Lounge light mood]: Selects a lounge 
light mode. This setting is applied when 
lounge light is enabled in standby mode. 
 [Scenea lounge light]: Switch on or off 
Scenea lounge light when Scenea is 
enabled. 
 [Wall colour]: Selects a color to match 
the wall color. Ambilight will correct its 
colours to mix best with the colour of 
the wall behind the TV.  
Set Ambilight response 
(Available on certain models only.) 
Before you can adjust the speed of Ambilight response, press  > [Setup] > [TV 
settings] > [Ambilight] > [Colour] > 
[Dynamic]. 
   
Set the speed which Ambilight responds to 
on-screen images. 
1. Press  (Experience). 
2. Select [Ambilight dynamic], then press 
OK. 
3. Move the slider to set Ambilight 
responsiveness. 
4. Press  to exit the slider. 5. Press OK to confirm your choice.  
  
						

							     
EN           23   
English
 Use lounge light 
(Available on certain models only.) 
When the TV is on standby, you can switch 
on Ambilight and create a lounge light effect 
in your room.  
During TV standby, press  on the side of 
the TV.  
Note: It may take more than 5 seconds for 
the lounge light to switch on. 
To select another lounge light colour, see Use your TV > Use Ambilight > Setup 
Ambilight. 
 
						

							  
EN           24           
3 Use more of 
your TV 
Use teletext 
Select a page NonPu bl i sh 
1. Press . 2. Select [Text], then press OK. 
3. Select a page by: 
 Entering the page number with the Numeric buttons. 
 Pressing   or      to view the 
next or previous page. 
 Pressing the Color buttons to select a 
color coded item. 
4. Press  to exit teletext. 
Access teletext options NonPu bl i sh 
1. When in teletext, press . 
2. Select an option: 
 [Freeze page] / [Unfreeze page]: 
Freezes or unfreezes the current page. 
 [Dual screen] / [Full screen]: Enables 
or disables dual screen teletext, which 
splits the current channel or source to 
the left of the screen, with teletext on 
the right. 
 [T.O.P. overview]: Table Of Pages 
(T.O.P.) teletext broadcasts allow you 
to jump from one subject to another 
without using page numbers.   NonPu bl i sh  [Enlarge] / [Normal view]: For more 
comfortable reading, you can enlarge the teletext page. Press the Navigation 
buttons to move around the enlarged 
screen.  
 [Reveal]: Hides or reveals hidden 
information on a page, such as solutions 
to riddles or puzzles. 
 [Cycle subpages]: Cycles through 
subpages automatically if subpages are 
available. 
 [Language]: Switches to a different 
language group to display a language 
correctly when that language uses a 
different character set. 
3. Press  to exit the options menu. 
Select a teletext language 
Some digital TV broadcasters have several 
teletext languages available. You can set your 
primary and secondary language. 
1. Press . 2. Select [Setup] > [Channel settings] or 
[Satellite settings]  > [Languages] > 
[Primary Text] or [Secondary Text].  
3. Select your preferred teletext languages, then press OK.  
Select subpages NonPu bl i sh 
A teletext page number can hold several 
subpages. These subpages are shown on a 
bar next to the main page number. 
When available on a teletext page, press  
or  to select subpages. 
Search teletext NonPu bl i sh 
1. When in teletext, press OK to highlight 
the first word or number. 2. Press the Navigation buttons to skip to 
the word or number to search. 
3. Press OK to begin the search. 
4. Press  until no word or number is 
highlighted to exit the search.  
Use digital teletext NonPu bl i sh 
Some digital TV broadcasters offer dedicated 
digital text or interactive services on their 
digital TV channels, for example BBC1.  
When in digital teletext: 
 Press the Navigation buttons  to 
select or highlight items. 
 Use the Color buttons to select an 
option, then press OK to confirm or 
activate. 
Note: Digital text services are blocked when 
subtitles are broadcast and [Subtitles] are 
enabled. Read Use more of your TV > Use 
subtitles (Page 26). 
 
						

							     
EN           25   
English
 Use Teletext 2.5 NonPu bl i sh 
Teletext 2.5 offers more colors and better 
graphics than normal teletext. If Teletext 2.5 
is broadcast by a channel, it is switched on 
by default. 
To switch Teletext 2.5 on or off 
1. Press . 2. Select [Setup] > [TV settings] > 
[Preferences] > [Text 2.5] > [On] or [Off], 
then press OK.  
Favorite channels 
Add or remove channels NonPu bl i sh 
1. Press . 2. Select [Channel list:], then press OK. 
3. Press . 
4. Select [Mark as favourite] or [Unmark as 
favourite], then press OK. 
A star appears in the channel grid, indicating 
that the channel is added to the favorite list. 
The star disappears if you remove the 
channel from the favorite list.    
Select a favorite list NonPu bl i sh 
View only channels in a favorite list, or view 
all channels if a favorite list is currently 
selected. 
1. In the channel list, press . 2. Select [Select list] > [Favourites] to 
display channels in a favorite list; or [All] to 
display all channels. 3. Press OK to confirm your choice.  
Use EPG 
Overview NonPu bl i sh 
The Electronic Program Guide (EPG) is an 
on-screen guide available for digital channels. 
EPG allows you to: 
 View a list of digital programs being 
broadcast 
 View upcoming programs 
 Group programs by genre 
 Set reminders when programs start 
 Setup preferred EPG channels 
Note: EPG is not available in all countries. 
Switch on EPG NonPu bl i sh 
1. Press . 2. Select [Programme guide], then press 
OK. 
  
EPG options NonPu bl i sh 
Use the EPG options menu to set or clear 
reminders, change day and access other 
useful EPG options. Depending on the 
broadcast service, these options are available 
only for seven or eight days. 
1. When in EPG, press . 2. Press the Navigation buttons and OK to 
select and adjust one of the following 
settings:    [Set reminder]: Sets program 
reminders. 
 [Clear reminder]: Clears program 
reminders. 
 [Change day]: Sets the EPG day. Select 
[Today], [Next day] or [Previous day]. 
 [More info]: Views program 
information. 
 [Search by genre]: Searches TV 
programs by genre. 
 [Scheduled reminders]: Lists programs 
reminders. 
 [Update Programme guide]: Updates 
the latest program information.     
Use timers and locks 
Sleeptimer NonPu bl i sh 
Sleeptimer switches the TV to standby after 
a pre-defined period of time. You can always 
switch off your TV earlier or reset the 
sleeptimer during the countdown. 
1. Press . 2. Select [Setup] > [TV settings] > 
[Preferences] > [Sleeptimer]. 
 
						

							  
EN           26           
  
3. Press the Navigation buttons to set the 
sleeptimer. The sleeptimer can be set up to 
180 minutes, in steps of five minutes. The 
sleeptimer is switched off if it is set to zero 
minutes. 
4. Press OK to activate the sleeptimer. The 
TV switches to standby after the set period 
of time. 
Child lock NonPu bl i sh 
You can prevent your children from 
watching TV by locking the TV. Set or change the child lock code 
1. Press . 
2. Select [Setup] > [Channel settings] or 
[Satellite settings] > [Child lock] > [Set 
code] or [Change code]. 
3. Enter the code with the Numeric 
buttons. 
Tip: If you forget your code, enter ‘8888’ to 
override any existing codes.  NonPu bl i sh 
Lock or unlock channels 
1. In the child lock menu, select [Channel 
lock]. 
2. Enter the child lock code with the Numeric buttons. The [Channel lock]  
menu appears. 
3. Select channels to lock or unlock.    
Parental rating NonPu bl i sh 
Some digital broadcasters rate their 
programs according to age. You can set your 
TV to display only programs with age ratings 
lower than your child’s age. 
1. Press . 2. Select [Setup] > [Channel settings] or 
[Satellite settings] > [Child lock] > 
[Parental rating]. A message appears 
prompting you to enter the child lock code.   
3. Enter the child lock code with the Numeric buttons. 
4. Select an age rating, then press OK. All 
programs beyond the selected age rating are 
blocked. 
For information on child lock codes, see Use 
more of your TV > Use timers and locks > 
Child lock (Page 26). 
Use subtitles 
On analog channels NonPu bl i sh 
1. Switch the TV to an analog TV channel. 2. Press  , then select [Text] and press 
OK. 
3. Enter the three number page number of 
the subtitles page (usually 888). 
4. Press  to exit teletext. Subtitles display if 
available.  
On digital channels NonPu bl i sh 
Not supported on MHEG channels. 
1. Press . 2. In the menu that appears, select [Off], 
[On] or [On during mute], then press OK. 
Note: With [On during mute], the TV 
displays subtitles only when the sound is 
muted with .  
  
Subtitle language NonPu bl i sh 
This feature is only supported on selected 
digital channels.  
1. While watching TV, press . 2. Select [Subtitle language]. 
3. Select a subtitle language from the list, then press OK. 
Note: More information about language 
settings is available in Setup the TV > 
Change language settings > Audio, Subtitle, 
Teletext languages (Page 34). 
  
						

							     
EN           27   
English
 Access multimedia 
Browse USB NonPu bl i sh 
You can view photos or play music and 
videos on TV from a USB storage device. 
Caution: Philips is not responsible if the USB 
storage device is not supported nor is it 
responsible for damage or loss of data from 
the device. 
You can access the USB content browser 
using one of the following methods:  
 When watching TV, connect the USB 
device to the USB port on the side of 
your TV. 
 Press . Select [Browse USB], then 
press OK.        
View slideshow 
Press the Navigation buttons to select a 
picture, then press OK. 
 To pause or stop playback, press OK 
again. 
 To jump to the previous or next file, 
press  or . 
 Press  to exit content browser. 
Press  to access or exit the following 
settings: 
 [Show info]: Displays the file 
information.  
 [Stop]: Stops slideshow. 
 [Rotate]: Rotates the file. 
 [Repeat]: Repeats the slideshow.    [Play once]: Plays the file once. 
 [Shuffle off] / [Shuffle on]: Enables or 
disables random display of pictures in 
the slideshow. 
 [Slideshow speed]: Sets the display 
time for each picture in the slideshow. 
 [Slideshow transition]: Sets the 
transition from one picture to the next. 
 [Set as Scenea]: Sets the selected 
picture as wallpaper on TV. 
 
 
Listen to music 
Press the Navigation buttons to select a 
music track, then press OK. 
 Press  /  to fast rewind or fast 
forward a track. 
 Press  to exit content browser. 
Press  to access or exit the following 
settings: 
 [Stop]: Stops audio playback. 
 [Repeat]: Repeats a song or an album. 
 [Play once] Plays the file once. 
 [Shuffle on] / [Shuffle off]: Enables or 
disables random play of songs.   
Watch video 
Press the Navigation buttons to select a 
video file, then press OK. 
 Press  or    to rewind or fast 
forward a file. 
 Press  to exit the content browser. 
During video playback, press  to access 
the following settings: 
 [Stop]: Stops playback. 
 [Repeat]: Repeats a video. 
 [Shuffle on] / [Shuffle off]: Enables or 
disables random play of videos.  
Listen to digital radio NonPu bl i sh 
If digital broadcasting is available, digital radio 
channels are installed automatically during 
installation. 
1. While watching TV, press . 2. Select [Channel list:], then press OK. 
3. In the channel list, press . 4. Select [Select list] > [Radio], then press 
OK. 
5. Select a radio channel, then press OK.   
You can listen to satellite radio broadcast (if 
available). 
1. While watching TV, press . 2. Select [Channel list:], then press OK. 
3. In the channel list, press . 4. Select [TV/Radio] > [Radio], then press 
OK.  
 
						

							  
EN           28           
Use Scenea 
Activate Scenea NonPu bl i sh 
You can use Scenea to display a picture as 
wallpaper on your TV. Make sure that the location of your TV is set to [Home] mode. 
1. Press . 2. Select [Scenea] , then press OK. 
The default or pre-loaded picture is 
displayed.   
Note: If the sleeptimer is off, the wallpaper is 
displayed for 240 minutes. Otherwise, it is 
displayed for the duration of the sleeptimer. 
For more information on the sleeptimer, see Use more of your TV > Use timers and 
locks > Sleeptimer (Page 25). 
Set a picture as Scenea NonPu bl i sh 
Note: The file size of the picture must not 
be more than 1MB. 
1. Connect the USB storage device to the 
TV. 
2. Press . 3. Select [Browse USB], then press OK. 
4. Select a picture, then press . 5. Select [Set as Scenea], then press OK. 
6. Select [Yes], then press OK. 
7. Press any key to exit Scenea. 
  
Universal access 
Enable universal access NonPu bl i sh 
Where supported by your digital TV 
broadcaster, this TV allows special audio and 
subtitles for the hearing impaired, as well as 
special audio for the visually impaired. 
To enable these features, you must turn on universal access in the [Preferences] menu. 
1. Press . 2. Select [Setup] > [TV settings] > 
[Preferences] > [Universal access] > [On], 
then press OK. 
  
Hearing impaired NonPu bl i sh 
Some digital TV channels broadcast special 
audio and subtitles adapted for people who 
are hearing impaired. To switch on hearing impaired audio and 
subtitles (if available) 
1. While watching TV, press . 2. Press the red button to select [Hearing 
impaired]. 
3. Press the green button to switch on 
hearing impaired audio and subtitles, press 
the red button to switch it off. 
4. Press  to exit. Tip: To verify whether a hearing impaired 
audio language is available, press  and select [Audio language]. Languages with an 
ear icon indicate hearing impaired support.  
Visually impaired NonPu bl i sh 
Some digital TV channels broadcast special 
audio adapted for people who are visually 
impaired. The normal audio is mixed with 
extra commentary. To switch on visually impaired audio (if 
available) 
1. While watching TV, press  . 2. Press the green button to select [Visually 
impaired]. 
3. Use the following buttons to select: 
 Red - [Off]: Turn off visually impaired 
audio. 
 Yellow - [Headphones]: Hear visually 
impaired audio from headphones only. 
 Green - [Speakers]: Hear visually 
impaired audio from speakers only. 
 Blue - [Speakers + headphones]: Hear 
visually impaired audio from speakers 
and headphones only. 
4. Press  to exit. 
Note: The green and yellow buttons are not 
applicable if EasyLink Remote Control is enabled. For more information, see Connect 
the TV > Use Philips EasyLink > EasyLink 
features (Page 51).  
Tip: To verify whether visually impaired 
audio is available, press  and select [Audio 
language]. Languages with an eye icon 
indicate visually impaired support. 
 
						

							     
EN           29   
English
 
Adjust volume for the visually impaired 
1. In the [Universal access] menu, press the 
yellow button to select [Mixed volume]. 
2. Press the Navigation buttons to move the 
slider up or down, then press OK. 
3. Press  to exit.     
   
Audio feedback for the visually impaired 
This feature enables audio feedback when 
buttons are pressed on the remote control 
or TV. 
1. In the [Universal access] menu, press the 
blue button to select [Key beep]. 
2. Press the green button to turn on audio 
feedback or press the red button to turn it 
off. 
3. Press  to exit.  
 
						

							  
EN           30           
4 Setup the TV 
Change picture and sound 
settings 
Settings assistant NonPu bl i sh 
Use the settings assistant to guide you 
through the picture and sound settings. 
1. While watching TV, press . 2. Select [Setup] > [Quick picture and 
sound settings], then press OK. 
3. Select [Start], then press OK.  
Follow the on-screen instructions to choose 
your preferred settings.  
Smart picture settings 
Use the [Smart picture] experience menu 
to access frequently-used picture settings. 
1. While watching TV, press . 2. Select [Smart picture], then select one of 
the following settings: 
 [Personal]: Sets the TV to your 
personal preferences set in the [Picture] menus in [Setup]. 
 [Vivid]: Rich and dynamic settings, ideal 
for daylight use. 
 [Natural]: A natural picture setting.       [Cinema]: Ideal settings for watching 
movies. 
 [Game]: Ideal settings for gaming. 
 [Energy saving]: The most energy 
conscious settings.  
 [Standard]: Adjusts picture settings to 
suit most environments and types of 
video. Factory default settings.  
 [Photo]: Ideal settings for viewing 
photos. 
 [Custom]: Allows you to customize 
and store personal picture settings. 
3. Press OK to confirm your choice. 
4. Press  to exit.  
More picture settings NonPu bl i sh 
1. Press . 2. Select [Setup] > [TV settings] > 
[Picture], then press OK. 
3. Select a setting to adjust: 
 [Smart picture]: Accesses pre-defined 
smart picture settings. 
 [Reset]: Resets to factory default 
settings. 
 [Contrast]: Adjusts the intensity of 
bright areas, keeping dark areas 
unchanged.    [Brightness]: Adjusts the intensity and 
details of dark areas. 
 [Colour]: Adjusts color saturation. 
 [Hue]: Compensates color variations in 
NTSC encoded transmissions. 
 [Sharpness]: Adjusts sharpness in the 
image. 
 [Noise reduction]: Filters and reduces 
noise in an image. 
 [Tint]: Adjusts the color balance in an 
image.         [Custom tint]: Customizes tint setting. 
 [Pixel Plus HD]/[Pixel Precise HD]: 
Accesses advanced settings, including [HD Natural Motion], [100 Hz Clear 
LCD], [Advanced sharpness], 
[Dynamic contrast], [Dynamic 
backlight], [MPEG artefact reduction], 
[Colour enhancement], [Gamma]. 
 [PC mode]: Enables picture settings 
adjustment when a PC is connected to 
the TV via HDMI. If enabled, you can select [Picture format] > [Unscaled] 
which provides maximum detail for 
display of PC content. 
 [Light sensor]: Adjusts settings 
dynamically to match lighting conditions.    [Picture format]: Changes the picture 
format. 
 [Screen edges]: Changes the picture 
size. 
 [Picture shift]: Adjusts the position of 
the picture. Not applicable if selected picture format is [Auto zoom] or 
[Wide screen].