Philips 32pfl6505h User Manual

     
EN           41   
English
 
4. HDMI ARC: In addition to regular HDMI 
functionality, outputs TV audio to a HDMI 
ARC compliant device, such as a home 
theatre system. 5. AUDIO IN: Audio input from a 
computer. 6. ANTENNA: Signal input from an antenna, 
cable or satellite. 
7. VGA: Video input from a computer.  
Side  
 
1. HDMI: Digital audio and video input from 
high-definition digital devices such as Blu-ray 
players. 2. USB: Data input from USB storage 
devices.      
 
3. CI (Common Interface...

  
EN           42           
DVD player 
Use an HDMI cable to connect the DVD player to an HDMI connector on the back of the TV. 
  
DVD-Recorder 
First, use two antenna cables to connect the antenna to the DVD Recorder and the TV. (SAT is 
available on certain models only) 
   
Finally, use a SCART cable to connect the DVD Recorder to a SCART connector on the back of 
the TV. 
  
    

     
EN           43   
English
 Home Theatre System 
First, use an HDMI cable to connect the device to the TV. 
   
Finally, use a digital audio cinch cable to connect the device to the TV. (not required for HDMI 
ARC) 
  
Audio and video synchronization (sync) 
If the sound does not match with the video 
on screen, you can set a delay on most DVD 
Home Theatre Systems to match the sound 
and video. 
  
EasyLink 
To automatically mute the TV speakers 
when content is played from your Home 
Theatre...

  
EN           44           
Dig. receiver/satellite 
First, use two antenna cables to connect the antenna to the receiver and the TV. 
   
Finally, use a SCART cable to connect the receiver to the back of the TV. 
  
Dig. receiver and DVD-R 
First, use three antenna cables to connect the digital receiver and the DVD Recorder to the TV. 
 
    

     
EN          45   
English
 
  
Then use a SCART cable to connect the digital receiver to the TV. 
   
Finally, use two SCART cables to connect the two devices and the TV. 
  
Dig. receiver, DVD-R and HTS 
First, use three antenna cables to connect the two devices and the TV.  
 
    

  
EN           46           
  
Then use a two SCART cables to connect the digital receiver to the DVD Recorder and the DVD 
Recorder to the TV. 
   
Then use an HDMI cable to connect the Home Theatre System to the TV. 
   
Finally, use a digital audio cinch cable to connect the Home Theatre System to the TV. 
  
    

     
EN          47   
English
 Dig. HD receiver 
First, use two antenna cables to connect the Digital HD receiver to the TV. 
   
Use an HDMI cable to connect the Digital HD receiver to the TV. 
  
Connect more devices 
Game console 
The most practical connections for a game 
console are at the side of the TV. However, 
more connectors are available at the back of 
the TV if needed. 
Enable game mode 
To prevent picture delay, set the TV to [Game] mode. 
1. Press . 2. Select [Smart picture] > [Game],...

  
EN           48           
The most practical connections for a game console are at the side of the TV. 
   
If you cannot use the side connector, use an HDMI or the EXT2 (YPbPr and Audio L/R) cable to 
connect the game console to the back of the TV.(On certain models, EXT2 is labelled EXT3). 
  
   

     
EN           49   
English
 Dig. camera 
To view pictures on your digital camera, 
connect it to the USB connection at the side 
of the TV and switch it on. If the content of 
your camera does not appear automatically, 
you may need to enable Picture Transfer 
Protocol (PTP) on the camera. Refer to the 
cameras user manual for instructions. 
  
Dig. camcorder 
The most practical connection for a camcorder is at the side of the TV. 
   
If you cannot use the side connector, use an HDMI or the EXT2...

  
EN           50           
Channel decoder NonPu bl i sh 
Before using a SCART digital channel 
decoder, select the channel to decode and 
assign the decoder to the SCART connector. 
1. Press . 2. Select [Setup] > [Channel settings] > 
[Decoder] > [Channel]. 
3. Set the channel you want to decode. 4. Select [Status], then the location of the 
decoder. 5. Press OK.  
PC NonPu bl i sh 
Connect a computer using one of the following cables: HDMI cable 
   
DVI-HDMI cable