Philips 32pfl5625h User Manual

     
EN           21   
English
 
 [Custom]: Allows you to customize 
and store personal picture settings. 
3. Press OK to confirm your choice. 
4. Press  to exit.  
Use Smart sound settings NonPu bl i sh 
Use the [Smart sound] experience menu to 
access frequently-used sound settings. 
1. While watching TV, press . 2. Select [Smart sound], then select one of 
the following settings: 
 [Personal]: Sets the TV to your 
personal preferences set in the [Sound] 
menus in [Setup]. 
 [Standard]: Adjusts...

  
EN           22           
Use Ambilight 
Switch on Ambilight 
(Available on certain models only.) 
Enjoy a more relaxed viewing experience 
and improved perceived picture quality. Dim 
the lighting conditions in the room for the 
best Ambilight effect. 
Caution 
To avoid bad infrared remote control 
reception, place your devices out of sight of 
Ambilight. 
1. Press  (Experience). 
2. Select [Ambilight], then press OK. 
3. To switch Ambilight on or off, select [On] 
or [Off].   
You can also press...

     
EN           23   
English
 Use lounge light 
(Available on certain models only.) 
When the TV is on standby, you can switch 
on Ambilight and create a lounge light effect 
in your room.  
During TV standby, press  on the side of 
the TV.  
Note: It may take more than 5 seconds for 
the lounge light to switch on. 
To select another lounge light colour, see Use your TV > Use Ambilight > Setup 
Ambilight. 
 

  
EN           24           
3 Use more of 
your TV 
Use teletext 
Select a page NonPu bl i sh 
1. Press . 2. Select [Text], then press OK. 
3. Select a page by: 
 Entering the page number with the Numeric buttons. 
 Pressing   or      to view the 
next or previous page. 
 Pressing the Color buttons to select a 
color coded item. 
4. Press  to exit teletext. 
Access teletext options NonPu bl i sh 
1. When in teletext, press . 
2. Select an option: 
 [Freeze page] / [Unfreeze page]: 
Freezes or...

     
EN           25   
English
 Use Teletext 2.5 NonPu bl i sh 
Teletext 2.5 offers more colors and better 
graphics than normal teletext. If Teletext 2.5 
is broadcast by a channel, it is switched on 
by default. 
To switch Teletext 2.5 on or off 
1. Press . 2. Select [Setup] > [TV settings] > 
[Preferences] > [Text 2.5] > [On] or [Off], 
then press OK.  
Favorite channels 
Add or remove channels NonPu bl i sh 
1. Press . 2. Select [Channel list:], then press OK. 
3. Press . 
4. Select [Mark as...

  
EN           26           
  
3. Press the Navigation buttons to set the 
sleeptimer. The sleeptimer can be set up to 
180 minutes, in steps of five minutes. The 
sleeptimer is switched off if it is set to zero 
minutes. 
4. Press OK to activate the sleeptimer. The 
TV switches to standby after the set period 
of time. 
Child lock NonPu bl i sh 
You can prevent your children from 
watching TV by locking the TV. Set or change the child lock code 
1. Press . 
2. Select [Setup] > [Channel settings] or...

     
EN           27   
English
 Access multimedia 
Browse USB NonPu bl i sh 
You can view photos or play music and 
videos on TV from a USB storage device. 
Caution: Philips is not responsible if the USB 
storage device is not supported nor is it 
responsible for damage or loss of data from 
the device. 
You can access the USB content browser 
using one of the following methods:  
 When watching TV, connect the USB 
device to the USB port on the side of 
your TV. 
 Press . Select [Browse USB], then...

  
EN           28           
Use Scenea 
Activate Scenea NonPu bl i sh 
You can use Scenea to display a picture as 
wallpaper on your TV. Make sure that the location of your TV is set to [Home] mode. 
1. Press . 2. Select [Scenea] , then press OK. 
The default or pre-loaded picture is 
displayed.   
Note: If the sleeptimer is off, the wallpaper is 
displayed for 240 minutes. Otherwise, it is 
displayed for the duration of the sleeptimer. 
For more information on the sleeptimer, see Use more of your TV >...

     
EN           29   
English
 
Adjust volume for the visually impaired 
1. In the [Universal access] menu, press the 
yellow button to select [Mixed volume]. 
2. Press the Navigation buttons to move the 
slider up or down, then press OK. 
3. Press  to exit.     
   
Audio feedback for the visually impaired 
This feature enables audio feedback when 
buttons are pressed on the remote control 
or TV. 
1. In the [Universal access] menu, press the 
blue button to select [Key beep]. 
2. Press the green...

  
EN           30           
4 Setup the TV 
Change picture and sound 
settings 
Settings assistant NonPu bl i sh 
Use the settings assistant to guide you 
through the picture and sound settings. 
1. While watching TV, press . 2. Select [Setup] > [Quick picture and 
sound settings], then press OK. 
3. Select [Start], then press OK.  
Follow the on-screen instructions to choose 
your preferred settings.  
Smart picture settings 
Use the [Smart picture] experience menu 
to access frequently-used picture...