Philips 32pfl5332s User Manual

							
11

English

Manual installation
MainLanguageTuner Mode
Install
Picture
FeaturesSoundAuto ProgramManualNameFav. ProgramNR
InstallSystemFine TuneLanguageTuner Mode
NameFav. Program
Auto ProgramManual
Manual
PAL-MPAL-N
Fine Tune
NR
AutoNTSCSystem
Changing the TV System
Press h button to display the on-screen 
menus.
Press ï button until Install is highlighted.
Press u button to select Install. 
 
 
Press ï button until Manual is  
highlighted.
Press u button to select Manual.
Press u button to select System. 
 
 
 
Press ï or Î button to select Auto, 
NTSC, PAL-M or PAL-N.
Press h or EXIT button to exit the  
on-screen menus.
TV Systems:
Automatic: The TV will automatically 
detect the tuner system.
NTSC: Used mainly in North America 
and some South American countries.
PAL-M: Used in Brazil.
PAL-N: Used in Argentina, Uruguay and 
Paraguay.
1.
2.
3.
4.
5.
6.
7.
8.
•
•
•
•
 
						

							
12

English

Manual installation
MainLanguageTuner Mode
Install
Picture
FeaturesSoundAuto ProgramManualNameFav. ProgramNR
InstallSystemFine TuneLanguageTuner Mode
NameFav. Program
Auto ProgramManual
ManualSystem10
-10
2
Fine Tune
Fine Tuning your channels
You can fine tune the channels after you have 
searched them automatically by using the 
Fine Tune feature.
Switch to the channel number that you want 
to fine tune.
Press h button to display the on-screen 
menus.
Press ï button until Install is highlighted.
Press u button to select Install. 
 
Press ï button until Manual is high-
lighted.
Press u button to select Manual. 
 
 
 
 
 
Press ï button until Fine Tune is 
highlighted.
Press u button to select Fine Tune. 
 
The Fine Tune level bar will be  
displayed.
Press ï or Î button to manually fine 
tune the channel reception.
Press h or EXIT button to exit the  
on-screen menus. 
 
 
1.
2.
3.
4.
5.
6.
7.
8.
9.
 
						

							
13

English

Naming your channels
MainLanguageTuner Mode
Install
Picture
FeaturesSoundAuto ProgramManualNameFav. ProgramNR
Install
003004005006007008009
002Tuner ModeAuto ProgramManual
Fav. Program
Language
Name
Install
003004005006007008009
Auto StoreManual StoreSort
Fav. Program
Language002
Name
Install
003      N E W S004      M O V I E005      S P O R006007008009
Tuner ModeAuto ProgramManual
Fav. Program
Language002      D O C U
Name
You can assign a short name for your  
channels with the Name feature.
Press h button to display the on-screen 
menus.
Press ï button until Install is highlighted.
Press u button to select Install.
Press ï button until Name is  
highlighted.
Press u button to select the first channel 
number on the list.
Press u button to start naming the  
channel number. 
Press the Æ until a rectangular block  
cursor appears next to the channel 
number.
Press ï or Î button to cycle through the 
list (A-Z, 0-9) to select the characters or 
numbers to use for the channel name.
Press u button to move the cursor to 
the second space and repeat step 7. 
 
You can use up to a combination of 5 
characters or numbers for naming your 
channels.
Press u button to store the name to the 
channel. 
The channel number and name will be 
displayed on the top left of the screen.
Press h or EXIT button to exit the  
on-screen menus.
 
 
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
 
						

							
14

English

Storing your favorite channels
MainLanguageTuner Mode
Install
Picture
FeaturesSoundAuto ProgramManualNameFav. ProgramNR
Install002003004005006
008009
007
LanguageTuner ModeAuto ProgramManualNameFav. Program
Install002003004005006
008009
007
LanguageTuner ModeAuto ProgramManualNameFav. Program
The Favorite Program feature lets you 
store only the channels you want on your 
favorite list which you can access using the 
remote control channel buttons.
Press h button to display the on-screen 
menus.
Press ï button until Install is highlighted.
Press u button to select Install.
Press ï button until Fav. Program is 
highlighted. 
 
The list of channel numbers are displayed 
on the right panel. 
All channel numbers will have a tick () 
beside them to indicate as favorite chan-
nel by default.
Press u button to select the first channel 
number on the list or ï button to move 
down the list.
Press u button to remove the tick 
or add the tick to the corresponding 
number. 
 
Only channel numbers with the tick will 
be added to your favorite list. When you 
use the Channel + / - buttons, you will 
only have your favorite channels.
Press h or EXIT button to exit the  
on-screen menus.
TIP: 
To access channels not in the favorite list, 
use the numeric (0-9) buttons.
1.
2.
3.
4.
5.
6.
7.
 
						

							
15

English

Adjusting your picture settings
MainBrightnessColor
Install
Picture
FeaturesSoundContrastSharpnessColor TempContrast +NR
Picture
Color TempContrast +
Sharpness
Brightness
ContrastColor100
0
5 3
NR
PictureCoolNormal
Color TempContrast +
Sharpness
Brightness
ContrastColorWarm
NRNR
PictureOffOn
Color TempContrast +
Sharpness
Brightness
ContrastColor
NRNR
The Picture sub-menu features let you 
adjust the various picture settings.
Press h button to display the on-screen 
menus.
Press u button to select the Picture 
sub-menu.
Press ï or Î button to highlight the  
sub-menu items.
Press u button to select the Picture 
sub-menu item.
Press ï or Î button to adjust the set-
tings of the sub-menu items.
Press u button to select the Picture 
sub-menu item.
Press ï or Î button to adjust the set-
tings of the sub-menu items. 
Depending on which Picture item you 
are adjusting, some items will have the 
level indicator bar, some with discreet 
settings such as Cool, Warm and  
Normal, or On and Off.
Press h or EXIT button to exit the  
on-screen menus.
Picture settings:
Brightness: Adjust how bright the  
picture should be.
Color: Adjust the intensity of the colors.
Contrast: Adjust how light or dark the 
tones should be.
Sharpness: Adjust the detail level of the 
picture.
Color Temp: Set the color to Cool 
(moreblue), Normal (balanced) or 
Warm (more red).
Contrast +: Enhances the contrast of 
the picture.
1.
2.
3.
4.
5.
6.
7.
8.
•
•
•
•
•
•
NR: Noise Reduction. Reduces pic-
ture noise (random dots).
•
 
						

							
16

English

Adjusting your sound settings
MainEqualizerBalance
Install
Picture
FeaturesSoundAVLIncr. SurroundSAPForced MonoNR
Equalizer120 HZ200 HZ500 HZ
3 KHZ7500 HZ12 KHZ12 K
50
-50
   01200 HZ
SoundOffOn
SAPForced Mono
Incr. Surround
Equalizer
AVLBalance
SoundMonoSpatial
SAPForced Mono
Incr. Surround
Equalizer
AVLBalance
NR
The Sound sub-menu features let you adjust 
the various sound settings.
Press h button to display the on-screen 
menus.
Press ï button to highlight the Sound 
sub-menu.
Press u button to select the Sound  
sub-menu.
Press ï or Î button to highlight the  
sub-menu items.
Press u button to select the Sound  
sub-menu item.
Press ï or Î button to adjust the set-
tings of the sub-menu items. 
Depending on which Sound item you are 
adjusting, some items will have the level 
indicator bar, some with discreet settings 
such as Mono, Spatial, or On and Off.
Press h or EXIT button to exit the  
on-screen menus.
Sound settings:
Equalizer: Adjust each individual fre-
quency (tone).
Balance: Adjust the left and right 
speaker sound level.
AVL (Automatic Volume Leveler): 
Control the sudden sound level increase 
when changing channels or during  
advertisement slots
Incr. Surround: Enhanced stereo effect. 
Select Incredible Surround or Stereo 
(when in stereo mode) or Mono or  
Spatial (when in mono mode).
SAP (Secondary Audio Programming): 
Activate to allow alternative languages or 
commentary.
1.
2.
3.
4.
5.
6.
7.
•
•
•
•
•
 Forced Mono: Select Off to leave 
broadcast signal as is. Or select On to 
force the signal to mono.
NOTE: 
Stereo and Incredible Surround 
modes can only be selected when the 
TV broadcast is in stereo. You can also 
press the f button to toggle the sound 
modes.
•
 
						

							
17

English

Using the timer
FeaturesSleepTime
Closed CaptionActive Control
Timer
Parental LockChild LockStart TimeStop TimeChannelActivateDisplay
TimerOff15
ChannelActivate
Stop TimeStart TimeTime30
6090120180Display
45
Sleep
MainTimerChild Lock
Install
Picture
FeaturesSoundParental LockActive ControlClosed Caption
NR
The Timer sub-menu features let you set the 
time and program the TV set to switch on or 
off automatically. 
Setting the sleeptimer 
Press h button to display the on-screen 
menus.
Press ï button until Features is  
highlighted.
Press u button to select the Features.
Press u button to select Timer.
Press u button to select Sleep. 
The right panel will display the sleep 
timer settings: Off, 15, 30, 45, 60, 90, 120, 
180 and 240 minutes.
Press ï or Î button to select the 
number of minutes remaining before the 
TV set automatically switches to standby 
mode.
Press u button to confirm the setting.
Press h or EXIT button to exit the  
on-screen menus. 
 
TIP:
You can check if the sleeptimer is enabled or 
how much more time remaining by pressing 
the STATUS button on the remote control.
The status will be displayed on the bottom 
center of the screen.
To cancel sleeptimer, select Off in the Sleep 
sub-menu.
1.
2.
3.
4.
5.
6.
7.
8.
 
						

							
18

English

Using the timer
MainTimerChild Lock
Install
Picture
FeaturesSoundParental LockActive ControlClosed Caption
NR
FeaturesSleepTime
Closed CaptionActive Control
Timer
Parental LockChild LockStart TimeStop TimeChannelActivateDisplay
Timer
ChannelActivate
Stop Time
Sleep
Start Time
Display
1 4 : 2 5Time
Timer
ChannelActivate
Stop Time
SleepOffTimeStart Time
Display
On
Setting the TV time
Follow steps 1 to 4 from the section on  
Setting the sleeptimer to access the 
Timer sub-menu.
Press u button to select the Timer 
sub-menu.
Press ï button to highlight Time.
Press u button to select the Time  
sub-menu. 
 
The entry fields --:-- will be displayed for 
you to enter the time in HH:MM format.
Use the numeric buttons (0-9) to enter 
the time. 
Example: 10:45
Press h or EXIT button to exit the  
on-screen menus.
Displaying the TV time
You can display the TV time (which you have 
set up) by pressing the STATUS button or 
display it at all times by turning on Display. 
 
Follow steps 1 to 4 from the section on  
Setting the sleeptimer to access the 
Timer sub-menu.
Press ï button to highlight the Display 
sub-menu.
Press u button to select Display.
Press ï or Î button to highlight On.
Press u button to select On.
Press h or EXIT button to exit the 
on-screen menus. 
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
 
						

							
19

English

Using the timer
Timer
ChannelActivate
Stop Time
Sleep
Display
2 0 : 0 0TimeStart Time
Timer
ChannelActivate
Sleep
Display
2 1 : 4 0TimeStart TimeStop Time
Timer
Activate
Sleep
Display
2TimeStart TimeStop TimeChannel
FeaturesSleepTime
Closed CaptionActive Control
Timer
Parental LockChild LockStart TimeStop TimeChannelActivateDisplay
Setting the wake-up clock
You can use the Timer feature to program 
the TV set to switch on and off at a specified 
time and channel.
Follow steps 1 to 4 from the section on  
Setting the sleeptimer to access the 
Timer sub-menu.
Press ï button to highlight Start Time 
is highlighted.
Press u button to select Start Time. 
 
The entry fields --:-- will be displayed for 
you to enter the time in HH:MM format.
Use the numeric buttons (0-9) to enter 
the time. 
Example: 20:00
Press h or EXIT button to exit the  
on-screen menus.
Press Í button to return to the Timer 
sub-menu.
Press ï button until Stop Time is 
highlighted.
Press u button to select Stop Time.
Use the numeric buttons (0-9) to enter 
the time. 
Example: 21:40
Press Í button to return to the Timer 
sub-menu.
Press ï button until Channel is  
highlighted.
Press h or EXIT button to exit the  
on-screen menus. 
 
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
 
						

							
20

English
TimerSleep
Daily
Display
OffTimeStart TimeStop TimeChannelActivate
Once

Using the timer
Press ï or Î button to select the  
channel number to be activated at the  
specified time.
Press Í button to return to the Timer 
sub-menu.
Press ï button to highlight Activate.
Press u button to select Activate.
Press ï or Î button to select Off, Once 
or Daily.
Press u button to select the option.
Press h or EXIT button to exit the  
on-screen menus.
Press . button on the remote control 
to switch the TV to standby mode.
Activate settings:
Off: To cancel wake-up clock.
Once: To set wake-up clock to activate 
once only.
Daily: To set wake-up clock to activate 
everyday at this time.
NOTE:
If the TV is still switched on after you have 
set the wake-up clock, the channel will 
switch to the specified number at Start 
Time.
Once the TV has been switched off via the 
POWER button of the TV controls, the 
12.
13.
14.
15.
16.
17.
18.
19.
•
•
•