Philips 32pfl3606h User Manual

29
Update at any time through digital 
broadcast
You can update your T V manually through 
digital broadcasts. 
1 Press .
2 Select [Setup] > [Software update] > 
[Check on major updates].
3  Follow the on-screen instructions to star t 
the update.
  »The TV restar ts after the software 
update is complete.
Update the TV software
1  Connect your USB storage device to the 
TV.
2 Press .
3 Select [Setup] > [Software update] > 
[Local updates] > [USB].
4 Press OK to update the T V sof tware 
manually.
5...

30
Start a TV demo
You can use demonstrations to better 
understand the features of your T V. Some 
demos are not available on cer tain models. 
Available demos are displayed in the menu list.
1  While you watch T V, press .
2 Select [Setup] > [Watch demo], OK.
3  Select a demo and press OK to view it.
4  To exit, press .
Reset the TV to factory 
settings
You can restore the default picture and sound 
settings of your TV. The channel installation 
settings remain the same.
1 Press .
2 Select [Setup] >...

31
Update the channel list
You can enable automatic update of channels 
when your T V is in standby mode. The 
channels stored in your T V are updated ever y 
morning according to the channel information 
in the broadcast.
1 Press .
2 Select [Setup] > [Channel settings] > 
[Channel installation] > [Automatic 
channel update].
3 Select [On] to enable the automatic 
update or select [Of f ] to disable it.
4  To return, press .
6 Install channels

32
Step 3 Fine-tune analogue channels
1 Press .
2 Select [Setup] > [Channel settings] > 
[Channel installation] > [Analogue: 
manual install] > [Fine-tune], then press 
OK.
3 Press YJ\]*

33
Access CAM services
1  Inser t and activate the CAM (see ‘Inser t 
and activate a CAM’ on page 38). 
2 Press  OPTIONS.
3 Select [Common interface].
  »Applications provided by the digital TV 
ser vice operator are displayed.
Note
  

34
b  EXT 1 (RGB and CVBS)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
 
c  DIGITAL AUDIO OUT 
Digital audio output to home theatres 
and other digital audio systems.
  
d  SERV. U (For selected models)
For use by ser vice personnel only.
SPDIF OUT
7 Connect devices
This section describes how to connect devices 
with different connectors. For the location of 
these connectors on your TV, see the Quick 
Star t Guide. More examples of connections...

35
g  HDMI 2 (For selected models)
Digital audio and video input from high-
Q*\];Y;J]Q;;Y>~Q*

36
d HDMI
Digital audio and video input from high-
Q*\];Y;J]Q;;Y>~Q*

37

38
Access CAM services
1  Inser t and activate the CAM (see ‘Inser t 
and activate a CAM’ on page 38). 
2 Press  OPTIONS.
3 Select [Common interface].
  »Applications provided by the digital TV 
ser vice operator are displayed.
Note