Philips 32pfl3406h User Manual

36
Access CAM services
1 Inser t and activate the CAM (see ‘Inser t 
and activate a CAM’ on page 36). 
2 Press  OPTIONS.
3 Select  [Common interface] .
 
» Applications provided by the digital TV 
ser vice operator are displayed.
Note
 
•
This menu option is available only if the CAM is 
inser ted and activated correctly.
Use Philips EasyLink
Get the most out of your HDMI-Consumer 
Electronic Control (CEC) compliant devices 
with Philips EasyLink enhanced control features. 
If your HDMI-CEC compliant...

37
English
Use one-touch standby
When you press  on the TV remote control, 
the TV and all HDMI-CEC compliant devices 
switch to standby mode.
1 Press  (Standby-On) on the TV’s or 
device’s remote control.   
» The TV and all connected HDMI 
devices switch to standby.
Set TV speakers to EasyLink mode
If you connect an HDMI-CEC compliant device 
that includes speakers, you can choose to hear 
the TV from those speakers instead of the TV 
speakers.
When you play content from an EasyLink 
compliant home...

38
Hear TV audio through another 
device
If you connect an EasyLink- compliant device 
that has speakers, you can get the most out of 
those speakers if you listen to TV audio through 
them. 
If the connected device is HDMI-ARC 
compliant, and you connect the device through 
an HDMI ARC connector, you can output TV 
audio through the HDMI cable. You will not 
need an additional audio cable.
1 Make sure that the EasyLink-compliant 
device is connected through an HDMI 
ARC connector (see ‘Back connections’...

39
English
Use a Kensington lock
There is a Kensington security slot at the back 
of the TV. Prevent theft by looping a Kensington 
lock between the slot and a permanent object, 
such as a heavy table.
 
EN
 

40
Tuner / Reception / 
Transmission
• Antenna input: 75ohm coaxial (IEC75)
•  DVB: DVB Terrestrial, DVB-C*, DVB-T, 
MPEG4
•  TV system: DVB COFDM 2K/8K; PAL I, 
B/G, D/K; SECAM B/G, D/K, L/L’ 
•  Video playback: NTSC, SECAM, PAL
•  Tuner Bands: Hyperband, S-channel, UHF, 
VHF
*For selected models
Remote control
•  Type: PF01E11B
•  Batteries: 2 x AAA (LR03 type)
Power
• Mains power : 220-240V, 50-60Hz
•  Standby power : 
• For xxPFL5xx6: < 0.15 W
•  For xxPFL4xx6, xxPFL3xx6, and 
DesignLine Tilt: < 0.3...

41
English
Product specification
Design and specifications are subject to change 
without notice.
  
47PFL4606H
• Without TV  stand
• Dimension (WxHxD): 1129.8 x 697.8 
x 83 (mm)
•  Weight: 17.5 kg
•  With TV  stand
• Dimension (WxHxD): 1129.8 x 745.6 
x 268 (mm)
•  Weight: 20.9 kg
46PFL5606H
•  Without TV  stand
• Dimension (WxHxD): 1080.8 x 652.9 
x 39.9 (mm)
•  Weight: 16.9 kg
•  With TV  stand
• Dimension (WxHxD): 1080.8 x 705.2 
x 294.9 (mm)
•  Weight: 20.52 kg
42PFL4606H
•  Without TV  stand
•...

42
32PFL3406H 
• Without TV  stand
• Dimension (WxHxD): 787.5 x 505.1 
x 80.5 (mm)
•  Weight: 7.8 kg
•  With TV  stand
• Dimension (WxHxD): 787.5 x 547.26 
x 221.43 (mm)
•  Weight: 9.4 kg
26PDL49x6H 
•  Without TV  stand
• Dimension (WxHxD): 641.5 x 428.3 
x 38.7(mm)
•  Weight: 8.30 kg
•  With TV  stand
• Dimension (WxHxD): 641.5 x 428.3 
x 166.4 (mm)
•  Weight: 8.98 kg
22PDL49x6H 
•  Without TV  stand
• Dimension (WxHxD): 532.5 x 357 x 
36.6 (mm)
•  Weight: 5.6 kg
•  With TV  stand
• Dimension (WxHxD):...

43
English
Cannot remove ‘e-sticker’ banner displayed on 
the TV. 
• To remove the logos and images, set the 
location of your TV to home.
1. Press 
.
2. Select [Setup] > [TV settings]  > 
[Preferences] > [Location].
3. Select [Home] and press  OK. 
TV channel issues
Previously installed channels do not appear in 
the channel list:
 
• Check that the correct channel list is 
selected.
No digital channels were found during the 
installation:  
• Check that the TV suppor ts DVB-T, DVB-T 
Lite or DVB-C in...

44
HDMI connection issues
There are problems with HDMI devices: 
• Note that HDCP (High-bandwidth Digital 
Content Protection) suppor t can delay the 
time taken for a TV to display content from 
a HDMI device. 
 
• If the TV does not recognise the HDMI 
device and no picture is displayed, tr y 
switching the source from one device to 
another and back again.
 
• If there are intermittent sound disruptions, 
check that output settings from the HDMI 
device are correct.
 
• If you use an HDMI-to-DVI...

45
English
dimensions 41
display, wallpaper  22
E
EasyLink 
control devices, from TV remote  37
enable 37
hear from other speakers  automatically 37
manually  38
picture quality, retain  38
subtitled video, maximise view  38
switch to standby, all devices  38
Electronic Programme Guide  20
environmental care  end of use  5
recycle 5
while you watch TV  6
EPG, menu  20
F
factory settings 28
favourites list, add 19
H
HDMI  32, 34
HDMI ARC 32
hearing impaired 18
high-definition (HD), content  32, 34
home...