Philips 32pfl3404h User Manual

							29
b  EXT 3 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
 
c  EXT 1 (RGB and CVBS)/EXT 2 (CVBS)
Analogue audio and video input from 
analogue or digital devices such as 
DVD players or game consoles. EX T 2 
suppor ts S-Video.
 
EXT1/ EXT2
(RGB/CVBS)/ (CVBS)
Back connector for 26 inch 
TV and larger
 
a  HDMI 1 (HDMI and AUDIO IN)
Digital audio and video input from high-
definition digital devices such as Blu-ray 
players.
  
Audio input from devices that require 
a separate audio connection, such as a 
computer.
Connections via DVI or VGA require an 
additional audio cable (see ‘Connect a 
computer’ on page 31).
SPDIF
OUT
English
EN
Downloaded From T,-Manual.com Manuals 
						

							30
a COMMON INTERFACE
Slot for a Conditional Access Module 
(C AM).
 
b AUDIO L/R
Audio input from analogue devices 
connected to VIDEO.
 
c VIDEO
Composite video input from analogue 
devices such as VCRs.
 
d USB
Data input from USB storage devices.
 
d TV ANTENNA
Signal input from an antenna, cable or 
satellite.
  
e SPDIF OUT
Digital audio output to home theatres 
and other digital audio systems.
 
f SERV. U
For sof tware update.
Side connector
 
TV ANTENNA
1
2
3
4
5
EN
Downloaded From T,-Manual.com Manuals 
						

							31
• DVI - HDMI cable
 
• HDMI cable and HDMI-DVI adaptor
 
• VGA cable
 
DVI
LEFT / RIGHT
HDMI 1 / DVIAUDIO IN :
PC IN(AUDIO)
For TV of size 26 inch and larger For TV of size 19-22 inch
DVI
LEFT / RIGHT
HDMI 1 / DVIAUDIO IN : PC IN(AUDIO)For TV of size 26 inch and larger For TV of size 19-22 inch
VGA
VGA
PC IN(AUDIO)
For TV of size 19-22 inch only 
 
e  HDMI (Only for TVs 26 inches and 
larger)
Digital audio and video input from high-
definition digital devices such as Blu-ray players.
 
Connect a computer
Before you connect a computer to the TV
Set the screen refresh rate on your  • 
computer to 60Hz.
Select a suppor ted screen resolution on  • 
your computer.
Connect a computer with one of the 
following connectors:
Note
Connections via DVI or VGA require an   •
additional audio cable.
• HDMI cable
  
English
EN
Downloaded From T,-Manual.com Manuals 
						

							32
Access CAM services
1  Af ter inser ting and activating the CAM, 
press 
 MENU.
2 Press  to select [Setup] > 
[Features] > [Common interface].
Applications provided by the digital TV    »
ser vice operator appear on the screen.
Note
This menu option is available only if the CAM   •
is inser ted and activated correctly.
Use Philips EasyLink
Your TV suppor ts Philips EasyLink, which 
enables one-touch play and one-touch standby 
between EasyLink-compliant devices. 
Note
Compliant devices must be connected to your   •
T V via HDMI.
Enable or disable EasyLink
Note
Do not enable Philips EasyLink if you do not   •
intend to use it.
1 Press MENU.
2 Press  to select [Setup] > 
[Installation] > [Preferences] > 
[EasyLink].
3 Select [On] or [Of f ].
Use one-touch play
1  Af ter enabling EasyLink, press play on 
your device. 
The TV automatically switches to the    »
correct source.
Use a Conditional Access 
Module
A Conditional Access Module (CAM) is 
provided by digital TV ser vice operators to 
decode digital TV channels.
Note
If required, refer to documentation from your   •
operator on how to inser t a smar t card into 
the Conditional Access Module.
Insert and activate a CAM
Caution
Be sure to follow the instructions described   •
below. Wrong inser tion of a CAM may 
damage both the CAM and your T V.
1  Switch off the T V.
2  Following the directions printed on the 
CAM, gently inser t the CAM into the 
COMMON INTERFACE at the side of 
the T V.
 
3  Push the CAM in as far as it will go.
4  Turn on the T V and wait for the CAM 
to be activated. This may take several 
minutes. Do not remove the CAM from 
the slot when in use — removing the 
CAM will deactivate digital ser vices.
EN
Downloaded From T,-Manual.com Manuals 
						

							33
Use one-touch standby
1  Press and hold Standby on the T V ’s or 
device’s remote control for at least three 
seconds. 
The TV and all connected HDMI    »
devices switch to standby.
Use a Kensington lock
There is a Kensington security slot at the back 
of the TV. Prevent theft by looping a Kensington 
lock between the slot and a permanent object, 
such as a heavy table.
 
English
EN
Downloaded From T,-Manual.com Manuals 
						

							34
Tuner/Reception/
Transmission
Aerial input: 75ohm coaxial (IEC75) • 
DVB: DVB Terrestrial, DVB -T MPEG4  • 
(only in some models)
T V system: DVB COFDM 2K /8K; PAL I,  • 
B/G, D/K; SECAM B/G, D/K , L /L’ 
Video playback: NTSC , SECAM, PAL • 
Tuner Bands: Hyperband, S-channel, UHF,  • 
VHF
Remote control
Ty p e :  P F 0 1E 0 9 B • 
Batteries: 2 x A A A (LR03 type) • 
Power
Mains power: 220 -240V, 50Hz • 
Standby power: < 0.3W • 
Ambient temperature: 5 to 40 degrees  • 
Celsius
Supported TV  mounts
To mount the TV, purchase a Philips TV mount 
or a VESA-compatible TV mount. To prevent 
damage to cables and connectors, be sure to 
leave a clearance of at least 2.2 inches or 5.5cm 
from the back of the TV.
Warning
Follow all instructions provided with the T V   •
mount. Koninklijke Philips Electronics N.V. 
bears no responsibility for improper TV 
mounting that results in accident, injury or 
damage.
TV screen 
size (inches)Required 
pitch (mm)Required 
mounting bolts
19 100 x 100 4 x M4
22 100 x 100 4 x M4
26 100 x 200 6 x M4
32 200 x 200 4 x M6
42 400 x 400 4 x M6
8 Product 
information
Product information is subject to change 
without notice. For detailed product 
information, go to www.philips.com/suppor t.
Supported display resolutions
Computer formats
Resolution - refresh rate: • 
640 x 480 - 60Hz • 
800 x 600 - 60Hz • 
1024 x 768 - 60Hz • 
1280 x 1024 - 60 Hz • 
1360 x 768 - 60Hz • 
1440 x 900 - 60Hz (For Full HD  • 
only)
1680 x 1050 - 50Hz, 60Hz (For Full  • 
HD only)
Via HDMI/DVI input • 
Video formats
Resolution - refresh rate: • 
480i - 60Hz • 
480p - 60Hz • 
576i - 50Hz • 
576p - 50Hz • 
720p - 50Hz, 60Hz • 
1080i - 50Hz, 60Hz • 
1080p - 24Hz, 25Hz, 30Hz, 50Hz,  • 
60Hz.
Multimedia
Suppor ted storage device: USB (Only  • 
FAT or FAT 32 USB storage devices are 
suppor ted) 
Suppor ted multimedia file formats: • 
Images: JPEG • 
Audio: MP3 • 
Note
Multimedia file names must not exceed 128   •
characters. 
EN
Downloaded From T,-Manual.com Manuals 
						

							35
TV channel issues
Previously installed channels do not appear in 
the channel list:
Check that the correct channel list is    •
selected.
No digital channels were found during the 
installation:
Check that the TV suppor ts DVB-T or    •
DVB -C in your countr y. See the listed 
countries on the back of the T V.
Picture issues
The TV is on, but there is no picture:
Check that the antenna is properly    •
connected to the T V.
Check that the correct device is selected    •
as the T V source.
There is sound but no picture:
Check that the picture settings are    •
correctly set.
There is poor TV reception from an antenna 
connection:
Check that the antenna is properly    •
connected to the T V.
Loudspeakers, unear thed audio devices,    •
neon lights, high buildings and other large 
objects can influence reception quality. 
If possible, tr y to improve the reception 
quality by changing the antenna direction 
or moving devices away from the T V.
If reception on only one channel is poor,    •
fine tune this channel.
There is poor picture quality from connected 
devices:
Check that the devices are connected    •
properly.
Check that the picture settings are    •
correctly set. 
The TV did not save your picture settings:
Check that the TV location is set to the  • 
home setting. This mode offers you the 
flexibility to change and save settings.
9 Troubleshooting
This section describes commonly encountered 
issues and accompanying solutions.
General TV  issues
The TV does not switch on:
Disconnect the power cable from the    •
power outlet. Wait for one minute then 
reconnect it.
Check that the power cable is securely    •
connected.
The remote control is not working properly:
Check that the remote control batteries    •
are correctly inser ted according to the 
+/- orientation.
Replace the remote control batteries if    •
they are flat or weak.
Clean the remote control and T V sensor    •
lens.
The standby light on the TV blinks red:
Disconnect the power cable from the    •
power outlet. Wait until the T V cools 
down before reconnecting the power 
cable. If the blinking reoccurs, contact 
Philips Consumer Care. 
You forgot the code to unlock the TV lock 
feature
Enter ‘8888’.   •
The TV menu is in the wrong language.
Change the T V menu to your preferred    •
language.
When turning the TV on/off/to standby, you 
hear a creaking sound from the TV chassis:
No action is required. The creaking sound    •
is normal expansion and contraction of 
the T V as it cools down and warms up. 
This does not impact per formance.
English
EN
Downloaded From T,-Manual.com Manuals 
						

							36
If a HDMI-to-DVI adaptor or HDMI to    •
DVI cable is used, check that an additional 
audio cable is connected to AUDIO L/R 
or AUDIO IN (mini-jack only).
Computer connection issues
The computer display on the TV is not stable:
Check that a suppor ted resolution and    •
refresh rate is selected on the computer.
Set the TV picture format to unscaled.   •
Contact us
If you cannot resolve your problem, refer to 
the FAQs for this product at w w w.philips.
com/suppor t. 
If the problem remains unresolved, contact 
Philips Consumer Care in your countr y as 
listed in the Addendum.
Warning
Do not at tempt to repair the product yourself.   •
This may cause severe injur y, irreparable 
damage to your product or void your 
warranty.
Note
Make a note of your T V model and serial   •
number before you contact Philips. These 
numbers are printed on the back of the T V 
and on the packaging.
The picture does not fit the screen; it is too 
big or too small:
Tr y using a different picture format.   •
The picture position is incorrect:
Picture signals from some devices may    •
not fit the screen correctly. Check the 
signal output of the device.
Sound issues
There is a picture but sound quality is poor:
Note
If no audio signal is detected, the T V   •
automatically switches the audio output off 
— this does not indicate malfunction.
Check that all cables are properly    •
connected.
Check that the volume is not set to 0.   •
Check that the sound is not muted.   •
There is a picture but the sound quality is 
poor:
Check that the sound settings are    •
correctly set.
There is a picture but sound comes from one 
speaker only:
Verify that sound balance is set to the    •
centre.
HDMI connection issues
There are problems with HDMI devices:
Note that HDCP suppor t can delay the    •
time taken for a T V to display content 
from a HDMI device. 
If the T V does not recognize the HDMI    •
device and no picture is displayed, tr y 
switching the source from one device to 
another and back again.
If there are intermittent sound    •
disruptions, check that output settings 
from the HDMI device are correct.
EN
Downloaded From T,-Manual.com Manuals 
						

							37
display 
resolution 34
E
EasyLink 
disable 32
enable 32
one-touch play  32
one-touch standby  33
environmental care  5
F
factory settings  23
favourite list 
select 14
set up  14
H
HDMI cable 
troubleshooting 36
I
install channels 
automatic 24
manual 25
K
Kensington lock 33
L
location 22
lock 
Kensing ton 33
M
menu 
main menu   10
teletex t 13
Multimedia 
technical specifications  34
multimedia 
listen to music  20
view photos  20
10 Index
B
batteries 34
bracket 34
C
Channel list 
favourite 14
troubleshooting 35
update 14
channels 
favourite list  14
install 
automatic 24
manual 25
rename 26
test reception  26
child lock 
ratings lock  18
clock 19
computer format 
technical specifications  34
Conditional Access Module 32
connections 
HDMI 
troubleshooting 36
mains cord  27
technical specifications  34
troubleshooting 36
D
demo 22
devices 
watch 9
digital channel 
test reception  26
digital radio 21
digital services 
CAM 32
teletex t  13
English
EN
Downloaded From T,-Manual.com Manuals 
						

							38
troubleshooting 35
TV 
adjust volume  9
menu  10
screen care  5
software 21
standby 8
switch channels  8
switch off  8
switch on  8
troubleshooting 35
tuner technical specifications  34
wall mount   34
TV lock 
lock channels  17
lock connected devices  17
V
Video format 
video format technical specifications  34
volume 
adjust 9
music 
digital radio  21
USB 20
O
One-touch play 32
One-touch standby 33
P
picture format 
picture format change  11
troubleshooting 35
Picture settings 10
R
ratings 18
reception 35
remote control 
over view  6
technical specifications  34
S
settings assistant 10
sleep timer 16
Smart card 32
Smart settings 10, 12
software 
version 21
sound settings  12
subtitles 
language 18
on analogue channel   18
on digital channel   18
T
Table of Pages 14
technical specifcations 34
Te l e t e x t 
features 13
subpages 14
table of pages  14
timer 
on timer  16
standby 16
EN
Downloaded From T,-Manual.com Manuals