Philips 32pfl3403d User Manual

							EN-10
ENGLISH
FRANÇAISE
ESPAÑOL
Connect the 
4.5  AC power cord
Warning
 
B
  Verify that your voltage corresponds with 
the voltage printed at the back of the TV.  
Do not insert the AC power cord if the 
voltage is different.
To connect the AC power cord
AV 1
75 ΩHDMI 1
HDMI 2 / PC INAV 2
AV 1
75 ΩHDMI 1
HDMI 2 / PC INAV 2
AV 1
75 ΩHDMI 1
HDMI 2 / PC INAV 2
AV 1
75 Ω
HDMI 1
HDMI 2 / PC IN
AV 2
SATELLITE
C ABLE
OR
Cable Receiver
Box
OR
CABLE
AV 1
75 ΩHDMI 1
HDMI 2 / PC INAV 2
Cable Receiver Box
OROR
ANTENNA SATELLITE CABLE
Locate the power connector at the back of the 
1.  
TV.   The location of the power connector varies 
according to TV model. 
Insert the AC power cord fully into the TV 
2.  
power connector.
Connect the AC power cord plug to the power 
3.  
outlet. Ensuring that the cord is tightly secured 
at both ends.
4.6  Manage cables
Route your AC power cord, antenna cable and all 
other device cables through the cable tie at the back 
of the TV.  It helps keep your cables tidy and easily 
manageable.
AV 1
75 Ω
HDMI 1
HDMI 2 / PC IN
AV 2
AV 175 ΩHDMI 1
HDMI 2 / PC INAV 2
4.7 Switch on the TV
Before you switch on the TV, check that the mains 
cord is properly connected.  Press 
POWER button 
at the side of the TV, or press power button on 
the remote control.  The TV normally takes 10-15 
seconds to start up and the following screen appears 
the first time you turn on the TV. 
Thank you for your purchase of this                    TV.
Please proceed with the following steps to set-up your TV. For the BEST \
possible picture performance, contact your local Cable / Satellite signa\
l 
provider for High Definition signal options available in your area.
Next
Press the GREEN Next button on your remote to proceed.
 
Follow the on-screen instructions to select your 
language and complete your TV setup.   Installation 
takes approximately 10 minutes.
Note 
D If you connect your TV to a cable receiver box or 
satellite set-top box, you do not need to install 
channels.  Press the red button on the remote 
control to exit the channel installation stage of 
the setup.
      
						

							EN-11
ENGLISH
FRANÇAISE
ESPAÑOL
Use your TV 
5.  
This section helps you perform basic TV operations. 
Switch your TV on or to standby
5.1 
To Switch the TV on
If the standby indicator is off, press 
• 
 .  POWER  
at the side of the TV. 
If the standby indicator is on, press
• 
 .  on the 
remote control.
C HANNELMENU
VOLUME
P O W ER
P O W ER
C HANNELMENU
VOLUME
P O W ER
P O W ER
To Switch to standby
Press 
•  . on the remote control.
To switch on from standby without the remote 
control. Press 
•  . POWER  at the side of the TV to 
switch the TV off.  
Press 
•  . POWER  again to switch the TV on.  
Note
 
D  
 
The TV is never powered off completely 
unless it is physically unplugged.
Watch TV
5.2 
Switch channels
Press a number (1 to 999) or press 
•  CH
 +/- on 
your remote control.
Press 
•  PREV CH
 to return to the previously 
viewed TV channel.
Note 
D  
You can also switch channels by pressing 
CHANNEL +/- at the side of the TV.
Adjust volume Press 
• 
VOL+/- on your remote control.
Press 
• 
MUTE  on your remote control to 
mute the sound.  Press 
MUTE again or press 
VOL+/- to restore the sound.
Note 
D  
You can also switch volume by pressing 
VOLUME +/- at the side of the TV.
             
						

							EN-12
ENGLISH
FRANÇAISE
ESPAÑOL
Watch channels from a cable receiver 
5.3 
box
Switch on the cable receiver box.  
1.  
The picture from your cable receiver box might 
appear automatically on your screen.
Use the remote control of your cable receiver 
2.  
box to select channels.
If the picture does not appear Press 
1.   SOURCE repeatedly to select the 
connected cable receiver box and wait a few 
seconds for the picture to appear.
Press 
2.   OK.
Use the remote control of your cable receiver 
3.  
box to select channels.
Watch a DVD
5.4 
Insert a DVD disc in your player.
1.  
Press 
2.   Play > on the remote control of your 
player.
The picture from the player might appear 
automatically on your screen.
If the picture does not appear Press 
1.   SOURCE repeatedly to select the correct 
source and wait a few seconds for the picture 
to appear.
Press 
2.   OK.
  
						

							EN-13
ENGLISH
FRANÇAISE
ESPAÑOL
Use more of your TV
6.  
This section describes the advanced features of your 
TV.
6.1  Remote control overview
1
2
3
4
5
6
7
8
9
10
11
12 13 14 15 16 17 18 19 20
 1.   .  POWER  
Switches the TV on from standby or back to 
standby.
SOURCE
2.    
Selects connected devices.
SLEEP  
3.  
Sets the TV to turn itself off within a certain 
time. CLOCK
4.    
See  Set the clock section.
5.   To add or remove a channel in the favorite 
channels list of the TV.
FORMAT
6.    
Selects a picture format. See  Change Picture 
format section.
CURSOR BUTTONS  
7.   Î  ï Í  Æ 
To navigate through the menus.
INFO
8.    
Displays programme information, if available.
CH +/-
9.    
Switches to the next or previous channel.
NUMBER BUTTONS 
10.  
Selects a channel, page or setting.
DOT 
11.  
Uses the dot for digital channels.
PREVIOUS CHANNEL 
12.  
Returns to the previously-viewed channel.
VOL +/-
13.    
Increases or decreases  volume.
14.  MUTE 
Mutes or restores sound.
MENU
15.    
Toggles the menu on or off.
OK
16.    
- To activates a setting.  
- To display the list of channels stored (according   
  to the selection made in the Installation mode   
  (Antenna or Cable)
AUTO MODE
17.    
Selects the among Personal, Sports, Standard, 
Movie, Powers Saver or Game settings.
VIEW 
18.  
Displays a list of all channels marked as favorite 
(incl. subchannels).
CC (Closed Captions) 
19.  
To select CC On, Off or On during mute.
SAP  
20.  
To select a Audio Program if available with the 
TV program: Main or SAP.
Note  
D
With a Digital signal, you can choose a different 
language.
 
 
						

							EN-14
ENGLISH
FRANÇAISE
ESPAÑOL
Change picture and sound settings
6.2 
Change picture settings
This section describes how to adjust your  picture 
settings.
Press 
1.   MENU on the remote control. 
Press 
2.   ï or Æ to select the  Picture menu.
Press 
3.   Î or ï  to select the one of the picture 
settings, and press  Æ to enter the setting.
Press 
4.   Î or ï  to adjust the setting, and press 
OK to confirm the change.
Press 
5.   Menu to exit.
Info
Settings Picture
5 8
Brightness
ColorContrast
Color temperature
Tint
Dynamic contrast
Picture format Sharpness
Picture
Sound
Features
Parental control
Installation
Info
Contrast
8Picture
Contrast                              50
Brightness                              50
Color                              50
Sharpness                                1
Color temperature
Tint                                3
Dynamic contrast
Picture format Settings
Summary of picture settings
The following picture settings can be configured. 
Depending on the format of the picture source, some 
picture settings might not be available.
Contrast
•   - Sets the level of white in the picture.
•  Brightness  - Sets the brightness of the picture.
Color
•   - Sets the level of saturation.
•  Sharpness  - Sets the sharpness of fine details.
Color temperature 
•  - Sets the color 
temperature to normal, warm or cool.
•  Tint - Adjusts the color balance between red 
and green.  
•  Dynamic contrast  - Enhances contrast in the 
darker and the brighter picture areas as the 
image on the screen changes.
Picture format
•   - Changes the format of the 
picture.
Info
Settings Picture
5 8
Brightness
ColorContrast
Color temperature
Tint
Dynamic contrast
Picture format Sharpness
Picture
Sound
Features
Parental control
Installation
Info
Contrast
8Picture
Contrast                              50
Brightness                              50
Color                              50
Sharpness                                1
Color temperature
Tint                                3
Dynamic contrast
Picture format Settings
  
						

							EN-15
ENGLISH
FRANÇAISE
ESPAÑOL
Change picture format
Press 
1.   FORMAT on the remote control to enter 
the  Picture format menu.
Press 
2.   Î or ï  to select a picture format.
Automatic•   (Not for HD and PC) 
Enlarges the picture automatically to fill the 
screen. The subtitles remain visible.
 
• Super zoom (Not for HD and PC) 
Removes the black bars on the side of 4:3 
broadcasts with minimal distortion.
 
4:3•   (Not for HD) 
Displays the classic 4:3 format.
 
• Movie expand 14:9 (Not for HD and PC) 
Scales the classic 4:3 format to 14:9. 
 
Movie expand 16:9 •  (Not for HD and PC) 
Scales the classic 4:3 format to 16:9.
 
16:9 subtitle 
•  (Not for HD and PC) 
Display 4:3 pictures using the full surface of the 
screen leaving the subtitles visible.
Wide screen•   
Stretches the classic 4:3 format to 16:9.
 
  
						

							EN-16
ENGLISH
FRANÇAISE
ESPAÑOL
Adjust  sound settings
This section describes how to adjust sound settings. Press 
1.   MENU on the remote control and press 
ï  to select  Sound.
Info
Settings Sound
5 5
Sound mode
Alternate audioSound setting
AVL Digital audio language
Picture
Sound
Features
Parental control
Installation
Press 
2.   Æto enter the list.
Press 
3.   Î or ï  to select one of the following 
settings:
Sound setting  
• 
Changes the bass and treble of the sound. Select 
each bar to change a setting. 
Sound mode
•   
Mono, Stereo, Virtual surround.
Alternate audio
•   
This gives you the possibility to swap between 
Main and second audio program (SAP), when it is 
available in analog channel.
Digital audio language 
• 
This gives you the possibility to swap between 
main and  alternative language, when it is available 
in digital channel.
AVL (Automatic volume leveling)
•   
Reduces sudden volume changes, for example, 
during commercials or when switching from one 
channel to another.  
Select  On or  Off.
Use 
6.3  Auto mode
Press 
1.   AUTO MODE on the remote control 
to set your TV to a predefined picture and sound 
setting.
Press 
2.   Î or ï  to select one of the following 
settings:
Personal
•   
The customized settings you defined by using the 
Picture menu.  
Sports
•   
Vivid picture settings and clear sound for high 
action.
Standard
•   
For normal TV viewing.
Movie
•   
Brilliant picture settings for a cinematic 
experience.  
Game
•   
Optimized for PCs, games consoles and play 
stations.
Power saver
•   
Eco friendly settings for lower power 
consumption.
Create 
6.4  favorite channels list
This section describes how to use favorite channels 
list of your TV.  Select channels from your list and 
choose the channel which you want to add.
Create the list Press the 
1.   Yellow button on the remote control.   
To add channel in the favorite channels list.
Press the 
2.   Green button on the remote control.  
The favorite channels list is shown.
Press the 
3.   Green button again to exit.
Note:  
D To remove the channel, press the  Yellow 
button on the remote control repeatedly.
Select a channel of favorite channels list Press the 
1.   Green button on the remote control 
to show all channels of your favorite channels list.
Press 
2.   Î or ï  to highlight a list
Press 
3.   OK on the remote control to confirm.
Tip:  
E Select channels that are not in a list by using 
the number buttons on the remote control.
 
						

							EN-17
ENGLISH
FRANÇAISE
ESPAÑOL
Set the clock
6.5 
This section describes how to set the time.
Press
1.    MENU on the remote control and select 
Installation  > Clock.
Info
Features Settings
Sleeptimer
6
Preferred channelsClosed captions
Caption service
Digital caption service
Digital caption options
Sleeptimer                                      0
Info
Installation Settings Clock
8
Autoprogram
Weak channel installationLanguage
Source
Clock
HDMI CEC
Current software info
Reset AV settings:           AM-- --
Press 
2.   Æ to enter the list.
Press 
3.   Î or ï  to set the time.   
(hour/minute/AM or PM)
Press 
4.   OK to confirm.
Set the 
6.6  sleeptimer
Sleeptimer switches the TV to standby after a defined 
period of time.
Press 
1.   MENU on the remote control and select 
Features >  Sleeptimer.
Info
Features Settings
Sleeptimer
6
Preferred channelsClosed captions
Caption service
Digital caption service
Digital caption options
Sleeptimer                                      0
Info
Installation Settings Clock
8
Autoprogram
Weak channel installationLanguage
Source
Clock
HDMI CEC
Current software info
Reset AV settings:           AM-- --
Press 
2.   Æto enter the  Sleeptimer bar.
Press 
3.   Î or ï  to set the sleep time from zero to 
180 minutes. If set to zero minute, the Sleeptimer 
is switched off.
Press 
4.   OK to activate the Sleeptimer or press 
sleep button on the remote control.
Use 
6.7  parental control and rating locks
Lock TV channels or connected devices with a 
four digit code to prevent children from watching 
unauthorised content.
Set or change your PIN Press
1.    MENU  on the remote control and select 
Parental control >  Change PIN.
Info
Parental control Settings
Change PIN
7
Please enter your current
PIN
Channel lock
US TV ratings lock
US Movie ratings lock
Canada English ratings lock
Canada French ratings lockRegion ratings lock
Change PIN
Info
Parental control Settings
Region ratings lock
7
Please enter your PIN
Channel lock
US TV ratings lock
US Movie ratings lock
Canada English ratings lock
Change PIN
Canada French ratings lockRegion ratings lock
Info
Parental control Settings
Channel lock
7
US TV ratings lock
US Movie ratings lock
Canada English ratings lock
Canada French ratings lockRegion ratings lock
Change PIN Channel lock
TV
AV1
AV2
HDMI 2HDMI 32
Side AVHDMI 1
Info
US TV ratings lock Settings I Parental controlAll
None
TV-Y
TV-Y7
TV-G
TV-PG
TV-MA(D) Dialog
(L) Language
(S) Sex
(V) Violence
TV-14
Info
Parental control Settings US Movie ratings lock
7
Channel lock
US TV ratings lock
Canada English ratings lock
Canada French ratings lock
Region ratings lock
Change PIN
US Movie ratings lock ALLNRGPGPG-13RNC-17X
Enter a 4-digit PIN with the number buttons on 
2.  
the remote control.
If you have a PIN, enter your current PIN.
• 
If you do not have a PIN, enter the default 
• 
code  0000.
If you have lost your PIN, enter master code 
• 
0711 .
Enter your new 4-digit PIN and then enter it 
3.  
again to confirm.
A message appears to confirm that your PIN has 
been changed.
Press 
4.   MENU to exit.
To lock one or more channels and connected 
devices
 
Press
1.    MENU on the remote control and select 
Parental control >  Channel lock.
Info
Parental control Settings
Change PIN
7
Please enter your current
PIN
Channel lock
US TV ratings lock
US Movie ratings lock
Canada English ratings lock
Canada French ratings lockRegion ratings lock
Change PIN
Info
Parental control Settings
Region ratings lock
7
Please enter your PIN
Channel lock
US TV ratings lock
US Movie ratings lock
Canada English ratings lock
Change PIN
Canada French ratings lockRegion ratings lock
Info
Parental control Settings
Channel lock
7
US TV ratings lock
US Movie ratings lock
Canada English ratings lock
Canada French ratings lockRegion ratings lock
Change PIN Channel lock
TV
AV1
AV2
HDMI 2HDMI 32
Side AVHDMI 1
Info
US TV ratings lock Settings I Parental controlAll
None
TV-Y
TV-Y7
TV-G
TV-PG
TV-MA(D) Dialog
(L) Language
(S) Sex
(V) Violence
TV-14
Info
Parental control Settings US Movie ratings lock
7
Channel lock
US TV ratings lock
Canada English ratings lock
Canada French ratings lock
Region ratings lock
Change PIN
US Movie ratings lock ALLNRGPGPG-13RNC-17X
 
						

							EN-18
ENGLISH
FRANÇAISE
ESPAÑOL
Enter you PIN.
2.  
Press 
3.   Î or ï  to select the channel or device 
you want to lock or unlock.
At each selection, press 
4.   OK to lock or unlock 
the channel or device.
An box with 
•  X indicates that the channel is 
locked.
An empty box indicates that the channel is 
• 
not locked.
Press 
5.   MENU to quit.
Use the TV ratings lock  
Your TV is equipped with a  V-chip that allows you to 
control access to individual programs based on their 
age rating and content rating.  The program content 
advisory data are sent by the broadcaster or by the 
program provider.
If you are receiving channels through a set-top box 
or cable receiver box connected by HDMI, you 
cannot use the TV ratings lock.  Your set-top box or 
cable receiver box must be connected through RF or 
AV connectors. 
Press
1.    MENU on the remote control and select 
Parental control >  US TV ratings lock.
Info
Parental control Settings
Change PIN
7
Please enter your current
PIN
Channel lock
US TV ratings lock
US Movie ratings lock
Canada English ratings lock
Canada French ratings lockRegion ratings lock
Change PIN
Info
Parental control Settings
Region ratings lock
7
Please enter your PIN
Channel lock
US TV ratings lock
US Movie ratings lock
Canada English ratings lock
Change PIN
Canada French ratings lockRegion ratings lock
Info
Parental control Settings
Channel lock
7
US TV ratings lock
US Movie ratings lock
Canada English ratings lock
Canada French ratings lockRegion ratings lock
Change PIN Channel lock
TV
AV1
AV2
HDMI 2HDMI 32
Side AVHDMI 1
Info
US TV ratings lock Settings I Parental controlAll
None
TV-Y
TV-Y7
TV-G
TV-PG
TV-MA(D) Dialog
(L) Language
(S) Sex
(V) Violence
TV-14
Info
Parental control Settings US Movie ratings lock
7
Channel lock
US TV ratings lock
Canada English ratings lock
Canada French ratings lock
Region ratings lock
Change PIN
US Movie ratings lock ALLNRGPGPG-13RNC-17X
Enter your PIN.  
2.  
If you do not have a PIN, set one as described in
Set or change you PIN on the previous page.
Press 
3.   Î or ï  and then press  OK to lock or 
unlock one or more ratings.
Each rating has a box-graphic in front of it to 
indicate whether programs carrying that rating 
are currently locked:
A box with 
•  X indicates that all items in the 
content ratings list are locked.
An empty box indicates that the item is not 
• 
selected.
A box with
•   / indicates that some content 
ratings are deselected.  For example, for  rating TV-14, you can deselect one or more 
of the following content ratings: Dialog (D), 
Language (L), Sex (S), or Violence (V).  
When you select 
•  All, all items in the ratings 
list are locked.  
When you select 
•  None, programs with no 
rating and programs with a rating of  None 
are locked.
When you lock a rating, all ratings in the 
• 
younger age categories are automatically 
locked.
Press 
4.   MENU to exit.
Summary of  TV ratings
Age rating Content rating
All 
None
None None
TV-Y   
Appropriate for children of all 
ages with themes and elements 
suitable for children aged 2-6. None
TV-Y7   
Programs designed for children 
age 7 and older. Fantasy Violence (FV)
TV-G   
Programs suitable for all ages.  
These programs contain little or 
no violence, no strong language 
and little or no sexual dialog or 
situations. None
TV-PG 
Programs contain elements that 
some parents may find unsuitable 
for younger children and which 
may need parental guidance.  The 
program may contain moderate 
violence, sexual dialog and/
or situations and some strong 
language. Dialog (D) 
Language (L) 
Sex (S) 
Violence (V)
TV-14 
Programs contain elements 
that may not be suitable for 
children under 14 years of age.  
These programs include one or 
more of the following: intense 
violence, intense sexual situations, 
suggestive dialog and strong 
language. Dialog (D) 
Language (L) 
Sex (S) 
Violence (V)
TV-MA 
Programs are designed to be 
viewed by adults and may be 
unsuitable for children under the 
age of 17.  These programs may 
contain graphical violence, explicit 
sexual activity and/or crude or 
indecent language. Language (L) 
Sex (S) 
Violence (V)
 
						

							EN-19
ENGLISH
FRANÇAISE
ESPAÑOL
Use the 
movie ratings lock
This section describes how to control viewing of 
movies based on their Motion Picture Association of 
America (MPAA) rating. Press
1.    MENU on the remote control and select 
Parental control > US Movie ratings lock.
Info
Parental control Settings
Change PIN
7
Please enter your current
PIN
Channel lock
US TV ratings lock
US Movie ratings lock
Canada English ratings lock
Canada French ratings lockRegion ratings lock
Change PIN
Info
Parental control Settings
Region ratings lock
7
Please enter your PIN
Channel lock
US TV ratings lock
US Movie ratings lock
Canada English ratings lock
Change PIN
Canada French ratings lockRegion ratings lock
Info
Parental control Settings
Channel lock
7
US TV ratings lock
US Movie ratings lock
Canada English ratings lock
Canada French ratings lockRegion ratings lock
Change PIN Channel lock
TV
AV1
AV2
HDMI 2HDMI 32
Side AVHDMI 1
Info
US TV ratings lock Settings I Parental controlAll
None
TV-Y
TV-Y7
TV-G
TV-PG
TV-MA(D) Dialog
(L) Language
(S) Sex
(V) Violence
TV-14
Info
Parental control Settings US Movie ratings lock
7
Channel lock
US TV ratings lock
Canada English ratings lock
Canada French ratings lock
Region ratings lock
Change PIN
US Movie ratings lock ALLNRGPGPG-13RNC-17X
Select one of the menus for movie ratings lock.
2.  
In the USA, select 
•  US Movie ratings lock.
In Canada, select 
•  Canada English ratings 
lock or  Canada French ratings lock.
Enter your PIN.  
3.  
If you do not have a PIN, set one as described in 
Set or change you PIN section.
The following screen shows the ratings in  US 
Movie ratings lock.
Press 
4.   Î or ï  then press  OK to lock or unlock 
one or more ratings.
Each rating has a box-graphic in front of it to 
indicate whether it is locked:
A box with 
•  X indicates that the rating is 
locked.
An empty box indicates that the rating is not 
• 
locked.
When you lock a movie rating, all items for ages 
below that movie rating are automatically locked.  
Press 
5.   MENU to exit. Summary of US movie ratings.
Movie rating
Description
All All items in the ratings list are locked.  
NR Not rated.
G Movies with a mild content, suitable for all ages.
PG Movies for which parental guidance is 
recommended.  They may contain a few racy or 
violent scenes or maybe some bad language.
PG -13 Movies for which parental guidance may be 
recommended if under age 13.
R Restricted.  The movies usually contain offensive 
sex or bad language and may be unsuitable for 
children under the age of 17.  Parental guidance or 
permission needed.
NC-17 Even with parental permission, forbidden under age 
17.  More offensive sex, violence or bad language.
X Movies which generally focus on sex, violence and/
or bad language.  Also known as pornography.
Summary of Canadian movie ratings.
Movie rating
Description
C Programming suitable for children under the age 
of 8 years.  No profanity or sexual content of any 
level allowed.  Minimal comedic violence.
C8+ Suitable for children ages 8 and over.  Low intensity 
violence and fantasy horror allowed.
G Movies with a mild content, suitable for all ages.
PG Movies for which parental guidance is 
recommended.  They may contain a few racy or 
violent scenes or maybe some bad language.
14+ Programming intended for children ages 14 and 
over.  May contain intense scenes of violence, 
strong profanity, and depictions of sexual activity 
within the context of a story.
18+ Programming intended for viewers ages 18 and 
over.  May contain strong violence, language, and 
sexual activity.
Summary of Canadian French movie ratings.
Movie rating
Description
G Appropriate for all ages with little or no violence 
and little to no sexual content.
8 ans+ Appropriate for children 8 and up which may 
contain little violence, some foul language and/or 
little to no sexual content.
13 ans+ Appropriate for children 13 and up, with moderate 
violence, language, and some sexual situations.  
Persons under 13 should be accompanied by an 
adult.
16 ans+ Appropriate for children 16 and up, with strong 
violence, strong language, and strong sexual content.
18 ans+ Only to be viewed by adults and contains extreme 
violence and graphic sexual content/pornography.