Philips 32pfl3321s User Manual
Have a look at the manual Philips 32pfl3321s User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
17
Using the TV in HD (High Definition) Mode
HD Mode
The HD (High Definition) mode allows you to enjoy clearer and sharper pictures if you are using a HD equipment that can produce high definition programming.
IMPORTANT
For the TV to function in HD mode, the
following steps must be taken :
& HDMI input MUST be connected to the HDMI/DVI output of the HD equipment . Use a HDMI to DVI adaptor if DVI is connected.
é Press the key to display Source List
and use the Î ï key to select HDMI.
“ Use the Æ / key to switch to the selected
source.
Using the HD menus
& Press the key to display the HD menu.
é Use the Î ï key to access the settings and the Í Æ / key to select or adjust setting.
HD Install menu
Note : You cannot access Install in the HD menu There is NO Install function in HD mode.
HD Picture and Sound settings
Functions of HD Picture and Sound settings arethe same as the TV Picture and Sound settings and work in exactly the same way as the TV Picture and Sound settings (see page 10).
HD Features
Timer : Functions of the Sleeptimer and Timer are the same as the TV Sleeptimer and Timer functions and work in exactly the same way as the TV Sleeptimer and Timer functions (see page 11).
PIP : Display a PIP screen to watch TV programmes at the same time. The PIP menuitems : PIP Size, Horizontal and Vertical work in exactly the same way as when calling a PIP screen in TV mode. For description of PIP menu items and how it works, refer to the section on “Using the PIP (Picture-in Picture) Feature” page 12.
* Horizontal Shift : Adjust the horizontal position of the image.
* Mode Selection : When you connect PC or HD equipment supporting resolutions of 480p, 576p or 720p, the Mode Selection in the Features menu will be highlighted. This will allow you to select between the PC and HD mode. If it does not support the 480p, 576p or 720p resolutions, you cannot access this function.
Æ
ÆÆÆHD
Features
Timer Contrast+ NR PIPHorizontal ShiftMode Selection
Supported HD format480p 576p 720p 1080i
Source
TV ÆEXT1EXT2 / SVHS2AV / SVHS3EXT 4HDMI
Source
TV EXT1EXT2 / SVHS2AV / SVHS3EXT 4HDMI Æ
Your Philips TV is HDMI compliant. If you do not get a good picture, please change the video format on your device (DVD player, cable set-top box, etc.) to a standard format. For example, for DVD player, select 480p, 576p, 720p or 1080i. For PC, select 640 x 480, 800 x 600 or 1024 x 768. If the problem persists, please refer to your PC user manual on possible software upgrades to your graphics card. Please note that this is not a defect of the TV set.
Downloaded From TV-Manual.com Manual~
18
Connect peripheral equipment
CAUTION :This is Class 1 apparatus.It must be connected to aMAINS socket out with aprotective earthingconnection.
Plasma TV
To wall socket
ANTENNA : 75 Ω
Connectors at bottom of TV connection
To wall socket
3 Press the AV key on the remote control
to display Source list. Select HDMI (ï key) and confirm selection by the Æ/ key.
Source
TV Æ EXT1 ÆEXT2 / SVHS2 ÆEXT3 / SVHS3 ÆEXT 4 ÆHDMI Æ
Connect your Cable or Satellite set-top box
Connectors of device is for reference only. Your device’s connectors may be labeled differently.
1 Do connections as shown in diagram.
2 After connecting all cables or devices,
switch on your TV and the device.
EXT 4
EXT 2 /SVHS2EXT 1DVI(AUDIO IN)
HDMI
AUDIO R LINPr Pb YL
R
EXT 4
EXT 2 /SVHS2EXT 1DVI(AUDIO IN)
HDMI
AUDIO R LINPr Pb YL
R
To wall socket
Set-Top Box
ANTENNA / CABLE
TO TV
Powercord Powercord Antenna Plasma LCD Cable
OR OR
EXT 4
EXT 2 /SVHS2EXT 1DVI(AUDIO IN)
HDMI
AUDIO R LINPr Pb YL
R
ANTENNA / CABLE
TO TV
To wall socket
OR
AC inLCDTV
To wall socket
1 Do connections as shown in diagram.
2 After connecting all cables or devices,
switch on your TV and the device.
Connect power and antenna / cable
Downloaded From TV-Manual.com Manual~
19
Connect your DVD Recorder / Player
Connect peripheral equipment
Source
TV Æ EXT1 ÆEXT2 / SVHS2 ÆEXT3 / SVHS3 ÆEXT 4 ÆHDMI Æ
Source
TV Æ EXT1 ÆEXT2 / SVHS2 ÆEXT3 / SVHS3 ÆEXT 4 ÆHDMI Æ
OR
Connectors of device is for reference only. Your device’s connectors may be labeled differently. For more information on connection to DVD Recorder/Player, refer to device’s instruction manual.
3 Press the AV key on the remote control
to display Source list. Select HDMI or EXT 1 (ï key) and confirm selection by the Æ/ key.
1 Do connections as shown in diagram. 2 After connecting all cables or devices, switch on your TV and the device.
EXT 4
EXT 2 /SVHS2EXT 1DVI(AUDIO IN)
HDMI
AUDIO R LINPr Pb YL
R
DVD / DVD-R
Do this connectionfor DVD Recording
Connectors at bottom of TV
ANTENNA/CABLE
TO TV
To wall socket
TO TV
OR
1 Do connections as shown in diagram.
2 After connecting all cables or devices,
switch on your TV and the device.
3 Press the AV key on the remote control
to display Source list. Select EXT 4 (ï key) and confirm selection by the Æ/
key.
Source
TV Æ EXT1 ÆEXT2 / SVHS2 ÆAV / SVHS3 ÆEXT 4 ÆHDMI Æ
Do this connectionfor DVD Recording
Pr/R/V Pb/B/U Y/GOUT
IN
AV
EXT 4
EXT 2 /SVHS2EXT 1DVI(AUDIO IN)
HDMI
AUDIO R LINPr Pb YL
R
To wall socket
To TV
DVD / DVD-R
Connectors at bottom of TV
Do this connectionfor DVD Recording
20
EXT 4
EXT 2 /SVHS2EXT 1DVI(AUDIO IN)
HDMI
AUDIO R LINPr Pb YL
R
Connect peripheral equipment
Connect your VCR
3 Press the AV key on the remote control
to display Source list. Select EXT 1 or EXT 2 / SVHS2 (ï key) and confirm selection by the Æ/ key.
1 Do connections as shown in diagram. 2 After connecting all cables or devices, switch on your TV and the device.
ANTENNA/CABLE
TO TV
To wall socketConnectors at bottom of TV
VCR
Connectors of device is for reference only. Your device’s connectors may be labeled differently. Important : In order to connect yourDecoder box, please use EXT 1 scart only.
OR
1 Do connections as shown in diagram. 2 After connecting all cables or devices, switch on your TV and the device.
To TV
AntennaCable
Connectors at bottom of TV
Side connectors of TV
VCR
To TV
To wall socket
Source
TV Æ EXT1 ÆEXT2 / SVHS2 ÆEXT3 / SVHS3 ÆEXT 4 ÆHDMI Æ
3 Press the AV key on the remote control
to display Source list. Select EXT3/SVHS3 (ï key) and confirm selection by the Æ/ key.
EXT 4
EXT 2 /SVHS2EXT 1DVI(AUDIO IN)
HDMI
AUDIO R LINPr Pb YL
R
VIDEO L AUDIO R
S-VIDEO
VIDEO IN
AUDIO IN
R
L
21
Connect peripheral equipment
Connectors of device is for reference only. Your device’s connectors may be labeled differently.
Connect your PC (Personal Computer)
3 Press the AV key on the remote control
to display Source list. Select HDMI (ï key) and confirm selection by the Æ/ key.
1 Do connections as shown in diagram.
2 After connecting all cables or devices, switch on your TV and the device.
NOTE : PC connection is only available via HDMI / DVI connector. VGA connection is not supported.
Source
TV Æ EXT1 ÆEXT2 / SVHS2 ÆEXT3 / SVHS3 ÆEXT 4 ÆHDMI Æ
EXT 4
EXT 2 /SVHS2EXT 1DVI(AUDIO IN)
HDMI
AUDIO R LINPr Pb YL
R
Audio Out
Connectors of PC
Connectors at bottom of TV
Connect your Game Console /Camera
1 Do connections as shown in diagram. 2 After connecting all cables or devices, switch on your TV and the device.
Connectors of deviceConnectors of device
Connect your Headphone
For your own personal listening pleasure,
connect the phono jack to the headphone
connector of the TV. There will be no sound
from the TV’s speakers.
Side connectors of TV
3 Press the AV key on the remote control
to display Source list. Select EXT3/SVHS3 (ï key) and confirm selection by the Æ/ key.
OR
S-VIDEO
VIDEO IN
AUDIO IN
R
L
S-VIDEO
VIDEO
AUDIO R
L
S-VIDEO
VIDEO IN
AUDIO IN
R
L
S-VIDEO
VIDEO IN
AUDIO IN
R
L
S-VIDEO
VIDEO
AUDIO R
L
Use left (white) audio only for mono soundUse left (white) audio only for mono sound
Side connectors of TV
22
Troubleshooting Tips
Below is a list of symptoms you may encounter with your TV. Before you call for service, make these simple checks.
Symptom Possible Causes What you should do
No display on screen • Faulty power supply • Check whether power cord is properly connected • TV’s Power not turned into the mains socket and to your TV. If there is still no power, on disconnect plug. Wait for 60 seconds and re-insert plug. Switch on TV again. • Press the key on the remote control.
Poor reception • Faulty antenna connection • Check antenna connection at rear of TV.(snowish picture and • Weak transmission • Try manually adjusting your picture (refer to page 9).noise) • Wrong TV system • Have you chosen the right TV system? (refer to page 9).
No picture • Faulty aerial and cable • Check whether euroconnector cables or aerial sockets are properly connected. • Wrong source selected • Check whether the source is correctly select ed. Press key to enter Source list and select the correct source.
No sound on • Wrong TV system • Check whether the correct TV system is selectedcertain channels (refer to page 9). No sound • Zero volume level • Try increasing volume. • Sound muted • Check that the mute ( ) mode is not on. If mute mode is on, press the key to deactivate mute mode. • Aim remote control directly at sensor on front of TV. • Headphone is connected • Disconnect headphone connection.
Sound interference • Electrical appliances • Try switching off any electrical appliances, for interference example, hairdryer, vacuum cleaner that are in use.
Unable to understand • Wrong language selected • Press the key to exit menu from screen. Press the language on accidently the key to enter main menu. Use the ï key screen to operate set to select the fourth item on the main menu. Use Æ / key to enter into the next menu level and the Í Æ key to select correct language.
TV not responding • Wrong placement of • Check the placement of the batteries.to remote control batteries • Flat batteries • Try changing the batteries.
Occasional appearance • Characteristic of liquid • This symptom is not a problem. The liquid crystalof red, blue, green crystal panel panel is built with very high precision technology and black spots on giving you the fine picture details. Occasionally, a few screen non-active pixels may appear on the screen as a fixed point of red, blue, green or black. Note that this does not affect the performance of the set.
Intermittent or • * HDCP (see glossary) • Noise is displayed if the connected digital equipment’s flickering picture on authentication failed (DVD player or Set-Top box) *HDCP authentication in HD mode failed. Check user manual for the digital equipment you are connecting. • Use a standard HDMI to DVI cable.
No sound or picture but • Set on standby mode • Press the key on the remote control.front panel red light is on
23
Troubleshooting Tips
Glossary
DVI (Digital Visual Interface) : A digital interface standard created by the Digital Display Working Group (DDWG) to convert analog signals into digital signals to
accommodate both analog and digital monitors.
RGB signals : These are the three video signals, Red Green Blue, which make up the picture. Using these signals improves picture quality.
S-VHS signals : These are 2 separate Y/C video signals from the S-VHS and Hi-8 recording standards. The luminance signals Y (black and white) and chrominance signals C (colour) are recorded separately on the tape. This provides better picture quality than with standard video (VHS and 8 mm) where the Y/C signals are combined to provide only one video signal.
NICAM sound : Process by which digital sound can be transmitted.
16:9 : Refers to the ratio between the length and height of the screen. Wide screen televisions have a ratio of 16/9, conventional screen TV sets have a ratio of 4/3.
HDMI (High-Definition Multimedia Interface) : Provides an uncompressed, all digital audio/video interface between the TV and any HDMI-equipped audio/video component, such as set-top box, DVD player and A/V receiver. HDMI supports enhanced or high-definition video plus two-channel digital audio.
System : Television pictures are not broadcast in the same way in all countries. There are different standards: BG, DK, I, and LL’. The System setting (page 8) is used to select these different standards. This is not to be confused with PAL or SECAM colour coding. PAL is used in most countries in Europe, SECAM in France, Russia and most African countries. The United States and Japan use a different system called NTSC.
HDCP (High-bandwidth Digital-Content Protection): HDCP encrypts the transmission of digital content between the video source or transmitter such as a computer, DVD player or set-top box and the digital display or receiver such as a monitor, television or projector.
Symptom Possible Causes What you should do
Cannot access Install • In AV, EXTERNAL or • Press AV key and select TV mode. You can now menu HD mode access the Install menu by using the Menu key.
PC modes do not • Wrong connections • Check whether connections are correct. (see work “Using your TV as PC Monitor” on page 16). • Wrong source selected. • Check whether the source is correctly selected. Press button to enter Source list and select the correct source. • Wrong display resolution • Check whether you have configured the computer on a compatible display resolution (see “Using your TV as PC Monitor” on page 16). • Wrong setting of PC • Check graphic card setting of PC. graphic card
S-Video colour • Wrong detection of • Check whether power cord is properly connectedbecomes faint signal • Press the P + key on the remote control to do a channel up and then press the P – key to do a channel down.
Black bar on top • PC refresh rate too high • Change PC refresh rate to 60 Hz.and bottom of screen in PC mode
24
Specifications
Reference table of Countries available for selection
Abbreviation Country Abbreviation Country Abbreviation Country
A Austria GR Greece H Hungary
B Belgium I Italy HR Croatia
CH Switzerland IRL Ireland PL Poland
D Germany L Luxembourg RO Romania
DK Denmark N Norway RUS Russia
E Spain NL Netherlands SK Slovakia
F France P Portugal SLO Slovenia
FI Finland S Sweden TR Turkey
GB England CZ Czech Republic - - - Others
26PFL3321S 32PFL3321S
Panel screen size 66 cm (26”) 80 cm (32”)
Audio output 2 x 5 W 2 x 15 W
TV System PAL, SECAM
Video playback NTSC, PAL, SECAM
Sound System Mono, Nicam Stereo, Virtual Dolby Surround
Power consumption 110 W 120 W
Standby power consumption < 1 W < 1 W
Set dimensions (with stand)
Width 80.5 cm 92.4 cm
Depth 22.2 cm 22.2 cm
Height 47.7 cm 55 cm
Nett Weight (with stand) 13.3 kg 19 kg
Specification and information are subject to change without notice.
© 2006 Koninklijke Philips N.V. All rights reserved Document order number: