Philips 32pfl3321s User Manual

26PFL3321S
32PFL3321S
www.philips.com/support
EN        USER MANUAL 
 

4
1
2
3
 

Stationary images on the TV screen
A characteristic of LCD and Plasma Panels is that 
displaying the same image for a long time can 
cause a permanent after-image to remain on the 
screen. This is called phosphor burn in. Normal 
use of the TV should involve the showing of 
pictures that contain constantly moving and 
changing images that fill the screen.
Examples of stationary images (this is not an all 
inclusive list, you may encounter others in your 
viewing).
• TV and DVD menus: listings of DVD...

1
Thank you for purchasing this television set.This handbook has been designed to help you install and operate your TV set.
We strongly recommend that you read it thoroughly.
Introduction
Table of Contents
Recycling
The packaging of this product is intended to be recycled. Apply to the local authorities
for correct disposal.
Disposal of your old product
Your product is designed and manufactured with highly quality material and components, 
which can be recycled and reused. When this crossed-out wheeled...

2

X
X
Safety information
Avoid placing your TV set under direct sunlight 
or heat. 
To prevent fire or shock hazard, do not expose your TV to rain or moisture.
Take care not to connect too many equipment to the same mains socket as it may cause overloading resulting in fire or electric shock.
Pull the power lead by the plug. Do not pull on the power lead. Do not use a poor fitting mains socket. Insert the plug fully into the mains. If it is loose, it may cause arching and result in fire.
No naked flame...

3

2
3    Using the Remote Control
 
 
 Pull out the plastic insulation sheet from the    
  battery to enable the remote control to  operate.
   
 Switching on the TV set
•  To switch on the TV set, press the POWER   
  button. A green indicator comes on and the    
  screen lights up.
•  If the TV set remains in standby mode (red    
 indicator), press the PROGRAM – / + key on 
  the keyboard or the P – / + key on the
 remote control.
4
1
Preparation / Getting started
Positioning the TV set
Place your...

4

Television keys and connectors
–
–
.1
3
4
2
67
8910
EXT 4
EXT 2 /SVHS2EXT 1DVI(AUDIO IN)
HDMI
AUDIO  R     LINPr      Pb       YL
R
AUDIO    INR
L
VIDEO    IN
S-VIDEO
11
EXT3/SVHS3
5
AC in ~
Downloaded From TV-Manual.com Manual~ 

5

Television keys and connectors
 1   POWER . : to switch the TV on and off.  
       
2   VOLUME –/+: to adjust sound level.
 
3  MENU : to access or close menus. 
 The PROGRAM /CHANNEL –/+ keys can 
  be used to select a menu item and the    
 VOLUME –/+ keys to enter into the selected  
  menu item and make adjustments.
4  PROGRAM / CHANNEL –/+ : to select
   programmes.
   
5  POWER socket : Insert the mains plug into 
  a wall socket.
6  DVI Audio Input : for connecting a HD 
  (high definition)...

6

Remote Control keys
 1  Standby  
 To set the TV to standby mode. To switch the   TV set on again, press  ,  to  ,
 P – / + or AV key.
 2 No function.  
 3 DVD / AUX  (see page 7).
 4 Surround Sound   To activate / deactivate the surround sound     effect. In stereo, this gives the impression that      the speakers are further apart. For models      equipped with Virtual Dolby Surround, you can       experience Dolby Surround Pro Logic sound      effects.
 5 Telextext keys (see page 15).  
 6 AV...