Philips 32pf9551 User Manual

EN
41
Note: you can not record signals from equipment connected to the YPbPrinput.
Connect two VCRs or VCR and DVD recorder
With eurocables
1. Connect the aerial cables 1,2and 3as
shown.
2. Connect your VCRs or DVD-recorder to
EXT1and 2with the eurocables 4and 5.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 29, and link it to 
EXT1or 2.
With aerial cables only
1. Connect the aerial cables 1,2and 3 as
shown.
2. Tune in your recorder’s testsignal and...

EN
42
Connect a DVD player, Cable box or game console
Note: in case of any problems, see Annex 5:
Issues referring to connected peripherals with a
HDMI connector, p. 56.
With a HDMI connector
HDMI is the leading new standard for Digital video
and audio interconnection.
1. Connect your equipment with the 
HDMI
connector.
2. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 29, and link it to 
HDMI 1or 2.
Tip: if necessary, you can adjust the picture position to...

EN
43
Connect a DVD player, a satellite receiver or Cable box 
With Component Video Connectors
1. Connect the three separate component video
cables 1to the YPbPr jacks on the DVD
player and to the Y,Pband Prjacks of 
EXT3
on the TV.
2. Connect the audio cable 2to the digital out
of the equipment and to the 
DIGITAL
AUDIO IN
connector of the TV.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 29. Also select Digital audio inin the same
Connections menu and...

EN
44
Connect a PC
PC equipped with a VGA connector:
1. Use a VGA to RGB H/V cable 1to connect
to the 
RGB H/Vconnectors of your TV.
2. Connect the audio cable 2to the 
AUDIO R
(right) and L(left) inputs of the TV.
3. Select the equipment you have connected in
the Installation, Select your connections, p. 29.
PC equipped with a DVI connector:
1. Use a DVI to HDMI cable to connect to one of
the 
HDMIconnector of your TV 1.
2. Connect the audio cable 2to the 
DIGITAL
AUDIO IN
connector of the TV.
3. Select...

EN
45
Connect a Home Cinema amplifier
Digital Home Cinema amplifier

EN
46 46
Select connected equipment
Before operating your connected equipment you have to make
a selection in the Installation, Select your connections menu,
p. 29.
1. Press the 
MENU/BROWSEkey.
2. Select TV menuand press the cursor right.
3. Select Installation.
4. Press the cursor right.
5. Select Connections.
6. Press the cursor right.
7. Select the input to which the peripheral equipment is
connected.
8. Press the cursor right again to enter the list of types of
peripherals connected to the selected...

Most of the audio and video equipment from our range of
products can be operated with the remote control of your TV.
Press one of the keys after you pressed one of the mode keys
(
DV D,STB,VCR,AUX) according to the equipment you want to
operate with this remote control.
See Use of the Remote control, p. 5-6.
Bto switch to standby 
®for record,
Òfor rewind (
VCR,CD);
search down (
DV D)
‡for stop,
πfor play, for pause
†for fast forward (
VCR,CD);
search up (
DV D)
ito display information
MENU/BROWSEto...

48
EN
Symptom Possible cause/Remedy
No picture

Annex 1:To set the remote control to work a Philips DVD or DVD/R
49
EN
Your TV remote control gives you the opportunity to control
your Philips DVD or DVD/R.
1. Press the 
DV Dmode key for 4 seconds until the LED lights
up constantly
2. Enter the code 500 with the digit keys for a Philips DVD
player.
Enter the code 542 with the digit keys for a Philips DVD
recorder.
>All mode LEDs will blink fast for 3 seconds as a
confirmation you entered the correct code.
If you entered a wrong code all mode LEDs will...

Introduction
Philips offers software upgrade capability for your TV using
portable memory. After you have completed a software
upgrade, your TV will typically perform better.
What improvements are made depends on the upgrade
software you are using as well as the software your TV
contained before the upgrade.
You can execute the software upgrade procedure yourself.
Be aware that the content of this document is addressing
technical or software skilled users.
To prepare a portable memory for software...