Philips 32hfl4351d User Manual

39
English
EN
HDMI cable and HDMI-DVI adaptor• 
 
VGA cable• 
 
Use a Conditional Access 
Module
A Conditional Access Module (CAM) is 
provided by digital TV ser vice operators to 
decode digital TV channels.
Note
If required, refer to documentation from your  •operator on how to inser t a smar t card into the Conditional Access Module.
DVI
LEFT / RIGHT
HDMI 1 / DV IAUDIO IN :
PC IN(AUDIO)Fo
r TV of size 26 inch and la rger
Fo
r TV of size 22 inch
VG A
VG A
PC IN(AUDIO)
For TV of size 22 inch only...

40EN
Use Philips EasyLink
Your TV suppor ts Philips EasyLink, which 
enables one-touch play and one-touch standby 
between EasyLink-compliant devices. 
Note
Compliant devices must be connected to your  •T V via HDMI.
Enable or disable EasyLink
Note
Do not enable Philips EasyLink if you do not  •intend to use it.
1 Press MENU.
2 Press  to select [Setup] > 
[Installation] > [Preferences] > 
[EasyLink].
3 Select [On] or [Of f ].
Use one-touch play
1 Af ter enabling EasyLink, press play on 
your device. 
The...

41
English
EN
9 Product 
information
Product information is subject to change without notice. For detailed product 
information, go to www.philips.com/suppor t.
Supported display resolutions
Computer formatsResolution • - refresh rate:
640 x 480 - 60Hz• 
800 x 600 - 60Hz• 
1024 x 768 - 60Hz• 
1280 x 720 - 60Hz• 
1280 x 768 - 60Hz• 
1280 x 1024 - 60 Hz• 
1360 x 768 - 60 Hz • 
1440 x 900 - 60Hz (For Full HD only)• 
1680 x 1050 - 60Hz (For Full HD only)• 
Via HDMI/DVI input• Video formatsResolution • -...

42EN
10 Troubleshooting
This section describes commonly encountered 
issues and accompanying solutions.
General TV issues
The TV does not switch on:
Disconnect the power cable from the  •
power outlet. Wait for one minute then 
reconnect it.
Check that the power cable is securely  •
connected.
The remote control is not working properly:
Check that the remote control   are  •
correctly inser ted according to the +/- 
orientation.
Replace the remote control batteries if  •
they are flat or weak.
Clean the...

43
English
EN
The	picture	does	not	fit	the	screen;	it	is	too	
big or too small:
Tr y using a different picture format. •
The picture position is incorrect:
Picture signals from some devices may  •
not fit the screen correctly. Check the 
signal output of the device.
Sound issues
There is a picture but sound quality is poor:
Note
If no audio signal is detected, the T V  •automatically mutes the audio output — this does not indicate malfunction.
Check that all cables are properly  •
connected.
Check that...

44EN
F
factory settings 20
H
HDMI
HDMI-CEC in 31
Troubleshooting 43
Hospitality 28
I
Installation
Automatic 21
Manual 22
K
Kensington lock 40
L
Language
Audio language 13
menu language 21
subtitle language 16
Troubleshooting 42
Lock
Kensing ton lock 40
Local KB lock 30
Low power standby 29
M
MENU
Main menu 10
Troubleshooting 42
Monitor out 31
Multimedia
Technical specifications 41
USB 17
Multi remote control 33
Music 18
O
One-touch play 40
One-touch standby 40
Index
A
ALARM 7, 32
Application
Hospitality...

45
English
EN
P
Photo
Slide show 17
USB 17
Picture format 12
Picture settings 10
POWER 8
Low power standby 29
Power on 29
Smar t power 29
Technical specifications 41
Professional mode
Activat 25
Options 26
PBS mode 28
Settings 28
R
Remote control
Professional Setup Remote control 24
RC lock 30
Technical specifications 41
Troubleshooting 42
S
Signage 28
Smart card 39
Smart settings 12
Software version 18
Sound settings 12
Subtitles
On analogue channels 15
On digital channels 16
Professional mode subtitle...

© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.