Philips 300wn5vb User Manual

							
Regulatory Information
connected to the terminal in the plug which is 
marked with the letter E or by the Earth symbol 
 or coloured GREEN or GREEN AND 
YELLOW. 
2. The BLUE wire must be connected to the 
terminal which is marked with the letter N or 
coloured BLACK. 
3. The BROWN wire must be connected to the 
terminal which marked with the letter L or 
coloured RED. 
Before replacing the plug cover, make certain 
that the cord grip is clamped over the sheath of 
the lead - not simply over the three wires. 
 
RETURN TO TOP OF THE PAGE 
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/REGS/REGULAT.\
HTM (11 of 11)2005-02-16 10:33:34 AM 
						

							
Other Related Information
Other Related Information
Safety and Troubleshooting • FAQs • Troubleshooting • Regulatory Information • Information 
for Users in the U. S. • Information for Users Outside the U.S 
Information for Users in the U. S.
For units set at 115 V : 
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT\
 three conductor cord 
a maximum of 15-feet long and a parallel blade, grounding type attachmen\
t plug rated 15 A, 125 V. 
For units set at 230 V: 
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT\
 three conductor cord 
a maximum of 15-feet long and a tandem blade, grounding type attachment \
plug rated 15 A, 250 V. 
Information for Users outside the U.S.
For units set at 230 V: 
Use a Cord Set consisting of a minimum 18 AWG cord and grounding type at\
tachment plug rated 
15 A, 250 V. The Cord Set should have the appropriate safety approvals f\
or the country in which 
the equipment will be installed and / or be marked HAR. 
 
RETURN TO TOP OF THE PAGE 
     
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/saf_other.htm\
2005-02-16 10:33:34 AM 
						

							
Philips Pixel Defect Policy
 
Philips Pixel Defect Policy
Product Features • Technical Specifications • Resolution and Preset Modes • Automatic 
Power Saving • Physical Specification • Pin Assignment • Product Views
Philips LCD Panel Pixel Defect Policy
Philips strives to deliver the highest quality products. We use some of \
the industrys most advanced 
manufacturing processes and practise stringent quality control. However,\
 pixel or sub pixel defects 
on the TFT LCD panels used in flat panel monitors are sometimes unavoida\
ble. No manufacturer 
can guarantee that all panels will be free from pixel defects, but Phili\
ps guarantees that any monitor 
with an unacceptable number of defects will be repaired or replaced unde\
r warranty. This notice 
explains the different types of pixel defects and defines acceptable def\
ect levels for each type. In 
order to qualify for repair or replacement under warranty, the number of\
 pixel defects on a TFT LCD 
panel must exceed these acceptable levels. For example, no more than 0.0\
004% of the sub pixels 
on a 15 XGA monitor may be defective. Furthermore, Philips sets even hi\
gher quality standards for 
certain types or combinations of pixel defects that are more noticeable \
than others. This policy is 
valid worldwide.
  
Pixels and Sub pixels
 
A pixel, or picture element, is composed of three sub pixels in the prim\
ary colors of red, green and 
blue. Many pixels together form an image. When all sub pixels of a pixel\
 are lit, the three colored 
subpixels together appear as a single white pixel. When all are dark, th\
e three colored sub pixels 
together appear as a single black pixel. Other combinations of lit and d\
ark sub pixels appear as 
single pixels of other colors.
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PIXEL.HTM (\
1 of 4)2005-02-16 10:33:41 AM 
						

							
Philips Pixel Defect Policy
 
Types of Pixel Defects 
Pixel and sub pixel defects appear on the screen in different ways. Ther\
e are two categories of pixel 
defects and several types of sub pixel defects within each category. 
Bright Dot Defects appear as pixels or sub pixels that are always lit or on. These are t\
he types of 
bright dot defects:
One lit red, green or blue 
sub pixelTwo adjacent lit sub pixels:
- Red + Blue = Purple
- Red + Green = Yellow
- Green + Blue = Cyan (Light Blue)
Three adjacent lit sub pixels 
(one white pixel)
Black Dot Defects appear as pixels or sub pixels that are always dark or off. These are \
the types of 
black dot defects:
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PIXEL.HTM (\
2 of 4)2005-02-16 10:33:41 AM 
						

							
Philips Pixel Defect Policy
One dark sub pixelTwo or three adjacent dark sub pixels
Proximity of Pixel Defects 
Because pixel and sub pixels defects of the same type that are near to o\
ne another may be more 
noticeable, Philips also specifies tolerances for the proximity of pixel\
 defects. 
 
Pixel Defect Tolerances
In order to qualify for repair or replacement due to pixel defects durin\
g the warranty period, a TFT 
LCD panel in a Philips flat panel monitor must have pixel or sub pixel d\
efects exceeding the 
tolerances listed in the following tables.
 
BRIGHT DOT DEFECTS ACCEPTABLE LEVEL
MODEL 300WN5
1 lit sub pixel 0
2 adjacent lit sub pixels 0
3 adjacent lit sub pixels (one white pixel) 0
Distance between two bright dot defects* N/A
Total bright dot defects of all types 0
Tiny bright dots less then 50% R/B, 30% G Max 4
* Bright Dot is defined as dots (sub-pixels) which appeared brightly i\
n the screen when the LCM 
displayed with whole pattern & Bright Dots brightess is defined over 50\
% of the brightness against 
around. (but, Green bright dot is over 30% of brightness against around\
)
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PIXEL.HTM (\
3 of 4)2005-02-16 10:33:41 AM 
						

							
Philips Pixel Defect Policy
* Here in Tiny Bright Dot is defined as for Red and Blue the bright ar\
ea should be no longer than 
1/2 sub-pixel and for green the bright area should be no larger than 1/3\
 sub-pixel.BLACK DOT DEFECTS ACCEPTABLE LEVEL
MODEL 300WN5
1 dark sub pixel 5 or fewer
2 adjacent dark sub 
pixels 1 or fewer
3 adjacent dark sub 
pixels 0
Distance between two 
black dot defects* 15 mm or more
Total black dot defects 
of all types 5 or fewer
 
TOTAL DOT DEFECTS
ACCEPTABLE LEVEL
MODEL 300WN5
Total bright or black dot 
defects of all types 5 or fewer
Note: 
* 1 or 2 adjacent sub pixel defects = 1 dot defect
All Philips monitors are ISO13406-2 Compliant
  
RETURN TO TOP OF THE PAGE
 
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PIXEL.HTM (\
4 of 4)2005-02-16 10:33:41 AM 
						

							
Connecting to Your PC, TV Antenna, DVD/VCR etc.
Connecting to Your PC, TV Antenna, DVD/VCR etc. 
Product Description • Accessory Pack • Connecting to Your PC, TV Antenna, DVD/VCR etc. • 
Getting Started • Optimizing Performance
Accessory Pack
Unpack all the parts. 
Power cableRemote control & batteries
   
DVI-D cable VGA signal cable
   
 
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm \
(1 of 13)2005-02-16 10:33:47 AM 
						

							
Connecting to Your PC, TV Antenna, DVD/VCR etc.
E-DFU pack 
 
Accessories below are available for TV model only. 
S-video cable Base 
   
 
2x 5W Detachable Speakers   
RETURN TO TOP OF THE PAGE 
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm \
(2 of 13)2005-02-16 10:33:47 AM 
						

							
Connecting to Your PC, TV Antenna, DVD/VCR etc.
Setting up and connecting your monitor/TV
CAUTION: Ensure that the power to the monitor/TV is switched off before the 
installation.
- Connecting the monitor/TV
l     Connect the cables to the rear of your monitor/TV according to the numbe\
rs:
TV model
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm \
(3 of 13)2005-02-16 10:33:47 AM 
						

							
Connecting to Your PC, TV Antenna, DVD/VCR etc.
 
 
 
Audio/Video model
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm \
(4 of 13)2005-02-16 10:33:47 AM