Philips 3 Cd Changer Manual

11
English
3139 115 21261
Preparations
BAntennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
AM Antenna
Fix the claw 
to the slot
¶Position the antenna as far as possible from a TV,
VCR or other radiation source.
FM Antenna
1
  
2
¶For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
terminal.
CSpeakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS...

12
English
3139 115 21261
Optional Connections
The optional equipment and connecting cords
are not supplied.  Refer to the operating
instructions of the connected equipment for
details.
Line Out Connection
Connect this output to any analog audio
equipment for playback or recording (CD
recorder, tape recorder or amplifier for example).
Use a cinch cable to connect the LINE OUT
terminals to the analog audio in terminals of the
equipment.
Connecting other equipment to your
system
Connect the audio left and...

13
English
3139 115 21261
Controls (main system’s illustration on page 3)
Controls on the system and
remote control
1
ECO POWER
– to switch the system on or to Eco Power
Standby mode.
2STANDBY ON y
– to switch the system on or to Standby mode.
3DISPLAY SCREEN
– to view the current status of the system.
4DISC TRAY
5DISC CHANGE
– to change disc(s).
6DISC 1 / DISC 2 / DISC 3 (CD DIRECT)
– to select a disc tray for playback.
7OPEN•CLOSE
– to open or close the disc tray.
8INTERACTIVE VU  METER
– to show the...

14
English
3139 115 21261
Controls
*
≤
¡
0
9
)
§
º
ª
•
)
9
™
≥
@
6
∞
#
$
@
DEMOªSTOP/CLEARªÇ
for CD ................. to stop playback or to clear a
program.
for TUNER ........ to stop programming.
.................................(on the system only) to delete the
preset radio station.
for TAPE .............. to stop playback or recording.
................................. to reset tape counter number.
for DEMO .........(on the system only) to activate/
deactivate the demonstration.
for CLOCK .......(on...

15
English
3139 115 21261
Basic Functions
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Plug and Play
Plug and Play allows you to store all available
radio stations automatically.
If Plug and Play has not been installed
1When you turn on the system, "AUTO
INSTALL - PRESS PLAY" will be displayed.
2Press PLAYÉ on the system to star t
installation.
➜"INSTALL" will be displayed and followed by
"TUNER" and then "AUTO".
➜
PROG will star t...

16
English
3139 115 21261
Switching the system on
In Standby/Demonstration mode

Press STANDBY ON.
➜The system will switch to the last selected
source.

Press CD, TUNER, TAPE, AUX (or CD 123,
TUNER, TAPE 1/2 or AUX/CDR on the
remote control).
➜The system will switch to the selected source.

Press any one of the DISC DIRECT PLAY
buttons.
➜The system will switch to CD mode.
In Eco Power Standby mode

Press ECO POWER.
➜The system will switch to last selected source.

Press CD 123, TUNER, TAPE 1/2 or AUX/...

17
English
3139 115 21261
Sound Navigation
For optimal sound listening, select only one
of the following navigation sound controls
at a time : wOOx, DSC or VAC .
wOOx
There are three wOOx settings to enhance the
bass response.
1Press wOOx ON•OFF to
switch ON (enhanced) or OFF
(normal) the wOOx sound
effect.

When wOOx is switched on;
➜
WO OX and the last selected
wOOx level will appear on the display.

When wOOx is switched off;
➜The display will show "WOOX NORM" and
WO OX will disappear from the...

18
English
3139 115 21261
CD Operation
FW- MINI HIFI SYSTEM
DISC
CHANGEOPEN•
CLOSE
D C3CHANGER
ECO POWER
CD 1•2•3
FM •AM
CDR / DVD
TAPE 1•2
PROGDUBBING REC CLOCK•
TIMERAUTO
REPLAY
STANDBY- ON
3 DISC DIRECT PLAYDISC 3
CD SYNCHRO RECORDINGCD / CD-
R/CD-
RW COMPATIBLE
MUSIC LEVELINTERACTIVE VU METERVOLUMEVOLUME
PREVPRESETNEXTDEMO
STOP/
CLEARPLAY•
PAUSESEARCH•TUNING
DISC 2DISC 1
CDTUNER
TAPE AUX
DISPLAY
ON•OFF LEVELWO OX
SOUNDNAVIGATION - JOG
SOURCE
WOOX
DYNAMIC
AMPLIFICATION
CONTROL
SURROUNDVAC
DSC...

19
English
3139 115 21261
CD Operation
Disc Playback
a disc is loaded in the disc tray
the current selected disc tray is empty
the current selected disc tray is loaded 
or playing
To playback all discs on the disc tray

Press PLAYÉ.
➜All the available discs will playback once, then
stop.
➜During playback, the selected disc tray, track
number and elapsed playing time of the current
track will appear on the display.
To playback one disc only

Press the DISC DIRECT PLAY button : DISC 1,
DISC 2 or DISC 3....

20
English
3139 115 21261 To review the program

Stop playback and press í or ë repeatedly.

To exit review mode, press Ç.
To erase the entire program

Press Ç once when playback is stopped or
twice during playback.
➜"PROGRAM CLEARED" will be displayed.
➜
PROG will disappear from the display.
Note:
–The program will be erased when the system is
disconnected from the power supply or when the
disc tray is opened.
Repeat
The current track, a disc, all available discs or all
programmed tracks can be...