Philips 26pfl3405h User Manual

							39
Product specification
Design and specifications are subject to change 
without notice.
  
19PFL3405H
Without T V stand • 
Dimension ( WxHxD): 455 x 303.7 x  • 
56 (mm)
Weight: 3.16 kg • 
With T V stand • 
Dimension ( WxHxD): 455 x 328.7 x  • 
13 7. 9  (m m)
Weight: 3.32 kg • 
22PFL3405H / 22PFL3415H
Without T V stand • 
Dimension (WxHxD): 526.02 x  • 
343. 5 x 55.79 (mm)
Weight: 4.0 kg • 
With T V stand • 
Dimension (WxHxD): 526.02 x  • 
369.5 x 148.96 (mm)
Weight: 4.2 kg • 
26PFL3405H 
Without T V stand • 
Dimension ( WxHxD): 637.4 x 410.8  • 
x 63 (mm)
Weight: 5.21 kg • 
With T V stand • 
Dimension (WxHxD): 637.41 x  • 
447.25 x 170 (mm)
Weight: 5.5 kg • 
Supported TV  mounts
To mount the TV, purchase a Philips TV mount. 
To prevent damage to cables and connectors, 
be sure to leave a clearance of at least 2.2 
inches or 5.5cm from the back of the TV.
Warning
Follow all instructions provided with the T V   •
mount. Koninklijke Philips Electronics N.V. 
bears no responsibility for improper TV 
mounting that results in accident, injury or 
damage.
TV screen 
size (inches)Required 
pitch (mm)Required 
mounting bolts 
(≤ 10mm)
19 75 x 75 4 x M4
22 75 x 75 4 x M4
26 75 x 75 4 x M4
English
EN
 
						

							40
TV channel issues
Previously installed channels do not appear in 
the channel list:
Check that the correct channel list is    •
selected.
No digital channels were found during the 
installation:
Check that the TV suppor ts DVB-T,    •
DVB -T Lite or DVB -C in your countr y. 
Some channels are not automatically installed 
on my TV:
During installation, make sure that    •
you select the countr y where you are 
installing the T V (see ‘Step 2 Select your 
countr y’ on page 27).
Picture issues
The TV is on, but there is no picture:
Check that the antenna is properly    •
connected to the T V.s
Check that the correct device is selected    •
as the T V source.
There is sound but no picture:
Check that the picture settings are    •
correctly set.
There is poor TV reception from an antenna 
connection:
Check that the antenna is properly    •
connected to the T V.
Loudspeakers, unear thed audio devices,    •
neon lights, high buildings and other large 
objects can influence reception quality. 
If possible, tr y to improve the reception 
quality by changing the antenna direction 
or moving devices away from the T V.
If reception on only one channel is poor,    •
fine tune this channel.
There is poor picture quality from connected 
devices:
Check that the devices are connected    •
properly.
Check that the picture settings are    •
correctly set. 
9 Troubleshooting
This section describes commonly encountered 
issues and accompanying solutions.
General TV  issues
The TV does not switch on:
Disconnect the power cable from the    •
power outlet. Wait for one minute then 
reconnect it.
Check that the power cable is securely    •
connected.
The remote control is not working properly:
Check that the remote control batteries    •
are correctly inser ted according to the 
+/- orientation.
Replace the remote control batteries if    •
they are flat or weak.
Clean the remote control and T V sensor    •
lens.
The standby light on the TV blinks red:
Disconnect the power cable from the    •
power outlet. Wait until the T V cools 
down before reconnecting the power 
cable. If the blinking reoccurs, contact 
Philips Consumer Care. 
You forgot the code to unlock the TV lock 
feature
Enter ‘8888’.   •
The TV menu is in the wrong language.
Change the T V menu to your preferred    •
language.
When turning the TV on / off / to standby, you 
hear a creaking sound from the TV chassis:
No action is required. The creaking sound    •
is normal expansion and contraction of 
the T V as it cools down and warms up. 
This does not impact per formance.
EN
 
						

							41
HDMI connection issues
There are problems with HDMI devices:
Note that HDCP (High-bandwidth Digital    •
Content Protection) suppor t can delay 
the time taken for a T V to display content 
from a HDMI device. 
If the T V does not recognise the HDMI    •
device and no picture is displayed, tr y 
switching the source from one device to 
another and back again.
If there are intermittent sound    •
disruptions, check that output settings 
from the HDMI device are correct.
If you use an HDMI-to-DVI adapter    •
or HDMI-to-DVI cable, check that an 
additional audio cable is connected to 
AUDIO (mini-jack only).
Computer connection issues
The computer display on the TV is not stable:
Check that your PC uses the suppor ted    •
resolution and refresh rate.
Set the TV picture format to unscaled.   •
Contact us
If you cannot resolve your problem, refer to the 
FAQs for this product at w w w.philips.com/suppor t. 
If the problem remains unresolved, contact Philips 
Consumer Care in your countr y as listed in the 
Addendum.
Warning
Do not at tempt to repair the product yourself.   •
This may cause severe injur y, irreparable 
damage to your product or void your 
warranty.
Note
Make a note of your T V model and serial   •
number before you contact Philips. These 
numbers are printed on the back of the T V 
and on the packaging.
The TV did not save your picture settings:
Check that the TV location is set to the  • 
home setting. This mode offers you the 
flexibility to change and save settings.
The picture does not fit the screen; it is too 
big or too small:
Tr y using a different picture format.   •
The picture position is incorrect:
Picture signals from some devices may    •
not fit the screen correctly. Check the 
signal output of the device.
Cannot remove ‘e-sticker’ banner displayed on 
the TV.
To remove the logos and images, set the    •
location of your T V to home.
1. Press 
 MENU.
2. Select [Setup] > [Installation] > 
[Preferences] > [Location].
3. Select [Home] and press OK. 
Sound issues
There is a picture but sound quality is poor:
Note
If no audio signal is detected, the T V   •
automatically switches the audio output off 
— this does not indicate malfunction.
Check that all cables are properly    •
connected.
Check that the volume is not set to 0.   •
Check that the sound is not muted.   •
There is a picture but the sound quality is 
poor:
Check that the sound settings are    •
correctly set.
There is a picture but sound comes from one 
speaker only:
Verify that sound balance is set to the    •
centre.
English
EN
 
						

							42
Conditional Access Module 35
connect 
antenna 31
PC 41, 34
connectors 
HDMI 41, 31
over view 31
USB 22
content ratings 20
country 27
D
decoder 25
default settings 26
demo 26
devices 10
devices 
add to home menu  11
connect 31
remove 11
rename 11
watch 10
digital channel 
subtitles 21
test reception  30
digital radio 23, 27
digital services 
CAM 35
teletex t 10, 15
disconnect USB 23
display 
resolution 38
dispose 5
E
EasyLink 
disable 36
enable 36
one-touch play  36
one-touch standby  36
system audio control  37
end of life 5
environmental care 5
e-sticker 25
10 Index
A
analogue 
fine-tune 28
antenna 31
B
batteries 38, 5
bracket for wall mount 39
C
CAM 35
care 5
channel decoder 25
channel grid 9
channels 
favourites list  16
fine-tune 28
grid 9
install 
automatic 27
manual 28
list 16
lock 20
rename 29
reorder / rearrange  29
switch 9
test reception (digital channels)  30
troubleshooting 40
tune 28
update 16
child lock 
lock channels  20
lock connected devices  20
PIN code  20
ratings lock  20
clock 
display 18
set 18
common interface 35
computer 
connect 41, 34
display resolution  38
EN
 
						

							43
M
menu 
language 27
main menu  11
teletex t 15
universal access  15
MHEG teletext 10
MPEG artifact reduction 12
multimedia 38
music 
digital radio  23
USB 23
with slideshow  23
mute TV speakers 37
O
OAD 24
on timer 19, 19
one-touch play 36
one-touch standby 36
P
parental rating 20
PC 
connect 34, 41
resolution 38
picture format 
change 13
troubleshooting 40
picture settings 12
PIN code 20
pixel plus link 25
power 38
power consumption 38
preferences 25
product specifications 38
F
factory settings 26
favourites list 
add to list  16
create list  16
view list  16
fine-tune channels 28
H
HDMI  41, 31, 32
hearing impaired 15
home mode 25
I
install channels 
automatic 27
manual 28
K
Kensington lock 37
L
language 
menu 27
subtitle 21
troubleshoot 40
list 
favourites list  16
location 
countr y 27
home or shop  25
lock 
Kensing ton lock  37
lock channels  20
lock connected devices  20
PIN code  20
ratings lock  20
EN
English
 
						

							44
T
Table of Pages 16
technical specifications 38
teletext 
features 15
menu 15
subpages 15
Table of Pages  16
use 10
timer 
on timer  19
sleep timer  19
standby 19
transmission 38, 40
transporting 4
troubleshooting 40
TV lock 
lock channels  20
lock connected devices  20
PIN code  20
ratings lock  20
TV overview 7
U
universal access menu 15
USB 
disconnect USB  23
listen to music  23
update sof tware  24
view photos  22
V
video format 
technical specifications  38
volume 
adjust 10
automatic levelling  14
delta 14
mute 10, 37
W
wall mount 4
R
radio 23
rearrange channels 29
reception 30, 40
recycle 5
register product 7
remote control 
batteries 38, 5
over view 7
technical specifications  38
rename channels 29
reorder channels 29
resolution 38
restore default 26
S
safety 4
screen care 5
settings 
picture  12
sound 14, 12
settings assistant 12
shop mode 25
slideshow 
view 22
with music  23
smart card 35
smart picture 12
smart settings 12 , 14
smart sound 14
software 
over the air download  24
update 24
version 24
sound settings  14
specifications 38
standby 9
subpages in teletext 15
subtitles 
language 21
on analogue channel  21
on digital channel  21
switch 
channels 9
on and off  9
source 10
EN
 
						

							45 EN
 
						

							46EN
 
						

							© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.