Philips 26pfl3405 User Manual

19
Update the TV software
Philips continuously tries to improve its 
products and we recommend that you update 
the TV software when updates are available. 
Check www.philips.com/suppor t for availability.
Check the current software version
1 Press  MENU. 
2 Press  to select [Software update] 
> [Current software inf ].
The TV displays the current software    »
information.
Download the software
1  On your PC , open a web browser and go 
to www.philips.com/support.
2  Download the latest sof tware...

20
4 Press  to select [Channel], then press 
 to enter.
5  Select one channel to map to the 
decoder / descrambler channel and press 
OK to confirm.
6 Select [Status], then press  to enter.
7 Select [EXT 1] (SCART), the connector 
used by the decoder / descrambler.
8 Press OK.
9 Press  MENU to exit.
Note
Select   •[None] if you do not want to map to 
the decoder / descrambler channel.
Reset the TV to factory 
settings
You can restore the default picture and sound 
settings of your TV. The channel...

21
5 Select [Start], then press OK to re-install 
channels. 
To stop searching, select  • [Stop] and 
press OK.
6 Press OK when installation is complete.
Manually install channels
This section describes how to search and store 
analogue TV channels manually.
Step 1 Select your system
Note
Skip this step if your system set tings are   •
correct.
1 Press  MENU.
2 Press  to select [Installation] > 
[Channel installation] > [Analogue: 
manual install].
The    »[Analogue: manual install] menu 
appears.
3...

22
Step 3 Fine-tune analogue channels
1 Press  MENU.
2 Press  to select [Installation] > 
[Channel installation] > [Analogue: 
manual install].
The    »[Analogue: manual install] menu 
appears.
3 Press  to select [Fine tune], then press 
 to enter.
4 Press  to adjust frequency.
5 Press OK to confirm.
6 Press  to select [Store current 
channel] to store channel number.
7 Press  to enter [Store current channel].
8 Select [Yes], then press OK to store 
current channel.
9 Press  MENU to exit.
Skip channels
1...

23
Rearrange channels
After you install channels, you can rearrange the 
order in which they appear.
1  When watching T V, press OK to display 
the channel grid.
2 Press  OPTIONS.
The channel options menu appears.   »
3 Press  to select [Reorder], then press 
OK.
4  Select the channel to rearrange, then 
press OK.
The selected channel is highlighted.   »
5 Press  to move the highlighted 
channel to the desired location, then 
press OK.
6 Press  OPTIONS.
  »[Done reordering] appears on the 
screen.
7...

24
a HDMI 1
Digital audio and video input from high-
definition digital devices such as Blu-ray 
players.
  
Connections via DVI or VGA require an 
additional audio cable (see ‘Connect a 
computer’ on page 27).
b  EXT 1 (RGB/CVBS)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
  
c  For use by service personnel only.
7 Connect devices
This section describes how to connect devices 
with different connectors. Examples are 
provided in the Quick Star...

25
f  PC IN (VGA and AUDIO) 
Audio and video input from a computer.
  
g SERV. U
For use by ser vice personnel only.
VGA
PC AUDIO IN/ PC IN(AUDIO)
VGA
d TV ANTENNA
Signal input from an antenna, cable or 
satellite.
  
e  EXT 2 (Y Pb Pr and AUDIO L/R) 
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
  
TV ANTENNA
English
EN
 

26
c AUDIO L/R
Audio input from analogue devices 
connected to VIDEO.
  
d VIDEO
Composite video input from analogue 
devices such as VCRs.
  
Side connectors
  
a  USB (Used for software upgrade only)
Data input from USB storage devices.
  
b 
Stereo audio output to headphones or 
earphones.
EN
 

27
• HDMI cable and HDMI-DVI adaptor
  
• VGA cable
  
DVI
PC AUDIO IN/ PC IN(AUDIO)
VGA
PC AUDIO IN/ PC IN(AUDIO)
VGA
Connect a computer
Before you connect a computer to the TV
Set the screen refresh rate on your  • 
computer to 60Hz.
Select a suppor ted screen resolution on  • 
your computer.
Connect a computer with one of the 
following connectors:
Note
Connections via DVI or VGA require an   •
additional audio cable.
• HDMI cable
  
• DVI - HDMI cable
  
DVI
PC AUDIO IN/ PC IN(AUDIO)
English
EN
 

28
Use a Kensington lock
There is a Kensington security slot at the back 
of the TV. Prevent theft by looping a Kensington 
lock between the slot and a permanent object, 
such as a heavy table.
  
Use Philips EasyLink
Your T V suppor ts Philips EasyLink, which 
uses the HDMI CEC (Consumer Electronics 
Control) protocol. EasyLink-compliant devices 
that are connected through HDMI connectors 
can be controlled by a single remote control. 
Note
The EasyLink-compliant device must be   •
switched on and...