Philips 26hfl3381d User Manual

							18EN 
 
 
 
 
 
 
 
 Listen to music
1 In the USB thumbnail browser view, 
select [Music] and press  to enter.
2 Press ¿GUIDE to switch between 3 Press  to select music or a music 
album.
4 Press OK to play the selected music.
Music settings
When listening to music, press (OPTIONS) 
to access one of the following music settings.[Start/Stop play][Repeat/Play once][Show info][TV speakers]
Disconnect a USB storage deviceCaution
Follow this procedure to avoid damage to your   USB storage device.
1 Press EXIT to exit the USB browser.
2disconnect the USB storage device.
 
 
 
 øѲ´§ ¿ª¿·´¿¾´» ±² ½±²­«³»® ®»³±¬» ½±²¬®±´÷ 
						

							19ENUpdate using OAD (On the Air 
software Download)
If Professional mode is [On], your TV automatically 
receives software updates in semi-standby mode 
without notice on screen. The TV restarts after the 
software update is complete.
Change TV preferences
1 Press MENU.
2 Press  to select [Setup] > 
[Installation] > [Preferences].
3 Press OK or to enter [Preferences].
[Location] Optimises TV settings for 
your location - home or shop.Note
If [Shop] mode is selected:
The   [Smart picture] setting will be switched 
to [Vivid] automatically to display the brightest 
backlight on screen.
E-sticker is applicable to display the TV selling   features on screen.
[Volume bar] Displays the volume bar 
when adjusting the volume.
[Channel info.] Displays information 
about the TV channel every time you 
switch channels. Select [Full] to view 
channel information or [Off] to turn off 
the channel information.
[EasyLink] Enables one-touch play and 
one-touch standby between EasyLink 
compliant devices.
[E-sticker] For shop mode only. Sets the 
location of the e-sticker.Access decoder channel
You can map channels provided through a 
decoder or descrambler to your TV channel 
selection. In this way, you can select these 
channels by using the RC of your TV. The 
decoder or a descrambler must be connected 
to EXT1 (SCART). 
Set decoder channel
Map channels from a decoder or descrambler
1 Press MENU.
2 Press  to select [Setup] > 
[Installation] > [Preferences] > 
[Decoder].
3 Press OK or  to enter [Decoder] menu 
.
4 Press  to select [Channel] and press 
OK or  to enter.
A list of analogue channels appears on    »
the screen.
5 Press  to select one channel to map 
to the decoder/descrambler channel and 
press OK6 Select [Status] and press OK or  to 
enter.
7 Press  to select [EXT 1] (SCART) 
the connector used by the decoder/
descrambler.
8 Press OK.
9 Press EXIT to exit. 
						

							20ENStart a TV DEMONote
Before starting DEMO, make sure to activate one 
of the following setting for TV DEMO to take effect:
1. [PBS settings] > [PBS mode] > [Off].
2. [PBS settings] > [Applications] > [Signage].
1 Press Red button (DEMO) on the 
remote control.
2 Press  to select a demo and press OK 
to view it.
3 Press Red button (DEMO) to exit.
Reset the TV to factory 
settings
You can restore the default picture and sound 
settings of your TV. Channel installation settings 
remain the same.
1 Press MENU.
2 Press  to select [Setup] > 
[Installation] > [Factory settings].
3 Press OK or  to enter the [Factory 
settings] menu.
A factory setting message appears.   »
4 Select [Reset] to start resetting.
5 Press EXIT to exit. 
						

							21EN6 Install channelsprompted to select a menu language and to 
install TV and digital radio channels (if available). 
This chapter provides instructions on how to Automatically install channels
This section describes how to search and store 
channels automatically.
Step 1 Select your menu language
1 Press MENU.
2 Press  to select [Setup] > 
[Installation] > [Language] > [Menu 
language].
3 Press OK or  to enter [Menu language].
4 Press  to select a language setting.
5 Press OK6 Press  to return to [Installation] menu.
Step 2 Select your country
Select your country for proper channel 
installation. 
1 Press MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Channel assistant].Ý´Ó»²« ´¿²¹«¿¹»±½µ
Ю·³¿®§ ­«¾¬·¬´» ·²
з½¬«®»
ͱ«²¼
Ú»¿¬«®»­
ײ­¬¿´´¿¬·±²
ͱº¬©¿®» «°¼¿¬»
Ü»½±¼»®
Ô¿²¹«¿¹»
ݸ¿²²»´ ·²­¬¿´´ò
Ю»º»®»²½»­
Ü»½±¼»®
Ý´±½µ
Ú¿½¬±®§ ­»¬¬·²¹­
Ó»²« ´¿²¹«¿¹»
Ю·³¿®§ ¿«¼·± ´¿²¹«¿¹»
Í»½±²¼¿®§ ¿«¼·± ´¿²¹«¿¹»
ó ó ó ó
ó ó ó ó
ó ó ó ó
ó ó ó ó
Ø»¿®·²¹ ·³°¿·®»¼
Ó»²« ´¿²¹«¿¹»Û²¹´·­¸
3 Press OK or  to enter the menu.
The country menu appears.   »
4 Press  to select your country.
5 Press OKThe channel installation guide appears    »
on the screen.
Step 3 Install channels
Install the available analogue and digital 
TV channels and digital radio channels 
automatically.
1 From the channel installation guide screen 
, select [Full installation] to automatically 
install all TV channels and digital radio 
channels.
  
2 Press OKThe TV starts to search and store all    »
the available channels. 
Ô¿²¹«¿¹»
ݸ¿²²»´ ·²­¬¿´´ò
Ю»º»®»²½»­
Ü»½±¼»®
Ý´±½µ
Ú¿½¬±®§ ­»¬¬·²¹­
Ó»²« ´¿²¹«¿¹»
ݸ¿²²»´ ¿­­·­¬¿²¬
Ô±½¿¬·±²
ݸ¿²²»´
ß«¬± ½´±½µ
ß½¬·±²
з½¬«®»
ͱ«²¼
Ú»¿¬«®»­
ײ­¬¿´´¿¬·±²
ͱº¬©¿®» «°¼¿¬»
Í»´»½¬ §±«® ½±«²¬®§ô ¬¸»² °®»­­ ÑÕÍ´±ª¿µ·¿Í´±ª»²·¿
Í°¿·²Í©»¼»²
Í©·¬¦»®´¿²¼
Ì«®µ»§
˵®¿·²»
ͬ¿®¬ ¿«¬±³¿¬·½ ·²­¬¿´´¿¬·±²ò̸·­ ¬¿µ»­ ¿ º»© ³·²«¬»­ò
Ú«´´ ·²­¬¿´´¿¬·±²
͵·° ·²­¬¿´´¿¬·±²
 
						

							22EN3 Press OK or  to enter [System] menu.
4 Press  to select your country or 
region.
5 Press OK6 Press  to return to [Channel install.] 
menu.
Step 2 Search and store new TV 
channels
1 Press MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
3 Press  to select [Search] and then OK 
or  to enter [Search].
4 Press  to manually enter the three-
digit frequency.
5 Press OK to begin search.
If a channel is unavailable at the    »
selected frequency, press OK to search 
for the next available channel.
67 Press  to select [Store new channel] 
to store the new channel under a new 
channel number.
8 Press OK or  to enter [Store new 
channel] and press OK.
9 Press  to return to the [Analogue: 
Manual] menu.ͱ«²¼
Ú»¿¬«®»­
Ю»º»®»²½»­Í¬¿®¬ «° ³»­­¿¹»
Ü·¹·¬¿´ Ì»­¬ ®»½»°¬òòò
з½¬«®»
ͱ«²¼
Ú»¿¬«®»­
ײ­¬¿´´¿¬·±²
ͱº¬©¿®» «°¼¿¬»
Ü»½±¼»®
Ô¿²¹«¿¹»
ݸ¿²²»´ ·²­¬¿´´ò
Ю»º»®»²½»­
Ü»½±¼»®
Ý´±½µ
Ú¿½¬±®§ ­»¬¬·²¹­
ݸ¿²²»´ ¿­­·­¬¿²¬
ͬ¿²¼¾§ «°¼¿¬»
ß²¿´±¹«»æ Ó¿²«¿´
ß²¿´±¹«»æ Ó¿²«¿´Í§­¬»³
 
3 When installation is complete, press OK 
to return to [Installation] menu.
Step 4 Update the channel list
You can choose to enable standby mode auto 
update of channels. If you enable this feature, 
the new channels stored in your TV will be 
updated every morning according to the 
channel information in the broadcast.
1
 Press MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Standby update].
3 Select [On] to enable the automatic 
update or select [Off] to disable it.
Manually install channels
This section describes how to search and store 
analogue TV channels manually.
Step 1 Select your systemNote
Skip this step if your system settings are   correct.
1 Press MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
ͧ­¬»³ ­»¿®½¸·²¹ò д»¿­» ©¿·¬ò
ͬ±°
Ü·¹·¬¿´ ½¸¿²²»´­ º±«²¼ß²¿´±¹«» ½¸¿²²»´­ º±«²¼éð
 
						

							23ENReorder channels
After you install channels, you can rearrange the 
order in which they appear.
1 When watching TV, press OK to display 
the channel grid .
2 Press (OPTIONS).
The channel options menu appears.   »
3 Press  to select [Reorder] and then 
OK to return to the channel grid.
4 Press  to select the channel you 
want to reorder and press OK.
The selected channel is highlighted.   »
5 Press  to move the highlighted 
channel to your preferred position and 
press OK.
6 Press (OPTIONS).
  »[Done reordering] appears on the 
screen.
7 Press OKTest digital reception
If using digital broadcasts, you can check the 
quality and signal strength of digital channels. 
This allows you to reposition and test your 
antenna or satellite dish.
1 Press MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Digital: test recept].
3 Press OK or  to enter the menu.
4 Press  to enter the frequency of 
the channel you want to test.
5 Press OKthen press OK[Search].
6 When complete, select [Store] to store 
the frequency.Note
If the signal quality and strength is poor,   reposition the antenna or satellite dish and 
retest.
If you still have problems with the reception   of your digital broadcast, contact a specialised 
installer.Step 3 Fine-tune analogue channels
1 Press MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
3 Press  to select [Fine-tune] and then 
OK or  to enter [Fine-tune].
4 Press  to adjust frequency.
5 Press OK when done.
6 Press  to select [Store current 
channel]under the current channel number.
7 Press OK or  to enter [Store curr. 
chan.] and press OK.
8 Press  to return to the [Channel install.] 
menu.
Rename channels
Channels can be renamed so that a name of 
your choice appears whenever the channel is 
selected.
1 When watching TV, press OK to display 
the channel grid .
2 Press  to select the channel you 
want to rename.
3 Press  (OPTIONS).
The channel options menu appears.   »
4 Press  to select [Rename channel].
A text input box appears.   »
5 Press  to select and change 
characters.
6 Select [Done]channels.Tip
Use   [Aa] to change upper-case letter to 
lower-case letter and vice versa.øѲ´§ ¿ª¿·´¿¾´» ±² ½±²­«³»® ®»³±¬» ½±²¬®±´÷øѲ´§ ¿ª¿·´¿¾´» ±² ½±²­«³»® ®»³±¬» ½±²¬®±´÷ 
						

							24EN7 Professional 
mode 
instruction
Introduction
Included in this TV is a special functional Hospitality or Signage applications. This feature 
is called Professional mode.
This section has been designed to help install 
and operate this TV in Professional mode. 
Before reading this section, please read section 
3 to 6 to set the basic functionality of this TV.This TV is specially designed to operate in 
Professional Mode. Professional Mode offers the Access to the [Consumer Menu] can be 
blocked.  This prevents users (e.g. guests) 
from deleting or changing channel settings 
and/or modifying picture and sound 
settings. This ensures that TVs are always 
set up correctly.
A switch-on volume and channel can be selected.  After switching on, the TV will and channel.
The maximum volume level of the TV can be limited in order to prevent disturbance 
to other guest.
Channels can be blanked (Video only).The TV local buttons VOLUME +/-, P/
CH+/- and SOURCE can be locked
Screen information can be suppressed. Professional Setup Remote 
control (2573 optional) 
						

							[Yes]  [STORE settings]
25ENa 
 
 (Enters Professional setup menu)
Selects SETUPPress M button to enter the Professional 
setup menu.Note
 SETUP mode should be selected for hotel 
installer.
Activating the Professional 
mode setup menu
1
 Switch on the TV and select a TV channel.
2
 Press the following buttons to access 
Professional mode setup menu:
[3, 1, 9, 7, 5, 3+t(MUTE)] on Guest 
remote control.
M button on Professional setup 
remote control. (When SETUP mode 
is selected on the Professional setup 
remote control.)
3select and change any of the settings.
4
 Select 
 > and select 
 to save the setting. Press MENU 
/ EXIT to exit Professional mode menu 
without saving.
5
 For Professional mode settings to take effect, 
you must restart the TV mains power.ÅÑÕÃ 
						

							26ENäп¹» ײ¬»²¼»¼ ´»º¬ ¾´¿²µ â 
						

							27 EN  Setup MenuProfessional mode options
This paragraph describes the functionality of each item in the Professional mode setup menu.Layer 1Layer 2Layer 3
BDS modeOff / On
Local Keyboard LockedOff / On
Remote Control LockedOff / On
OSD DisplayOff / On
Switch On Volume0 - 60
Maximum Volume0 - 60
Switch On ChannelList available channels
High Security ModeOff / On
Power OnOn / Standby
Welcome message Line 2Popop menu
Power onOn / Standby / Last status
Auto SCARTOff / On Display messageOff / On
Auto USB
Blank ChannelsList of available chanels to select fromYes / No (popup)
Smartloader to TVAction MenuAction Menu Welcome message Line 1Popop menu
Auto EasyLinkOff / On
Browse USBOff / On
Off / On