Philips 247e3lsu User Manual

9
2.3 Remove Base Stand
	Remove the Base Stand
Before	you	star t	disassembling	the	monitor	
base,	please	follow	the	instructions	below	to	
avoid	any	possible	damage	or	injur y.
1.	Place	the	monitor	face	down	on	a	smooth	
surface,	taking	care	to	avoid	scratching	or	
damaging	the	screen.
2.	Detach	the	base	stand	away	from	the	base	
column	by:	
(1)		Use	your	fingers	to	loosen	the	screw	
located	at	the	bottom	of	the	base.
(2)		Gently	move	up-and-down	to	release	
the	latch	that	locks	the	base	and	pull	
the...

10
3.	The	Smar tImage	Lite	on	screen	display	
will	remain	on	screen	for	5	seconds	or	
you	can	also	press	OK	button	to	make	
confirmation.
4.	
When	Smar tImage	Lite	is	enabled,	the	
sRGB	scheme	is	disabled	automatically.	To	
use	sRGB	you	need	to	disable	Smar tImage	
Lite	with	the		button	at	the	front	bezel	
of	your	monitor.
Except	using		key	to	scroll	down,	you	can	
also	press			buttons	to	choose	and	press	
OK	button	to	confirm	selection	and	close	the	
Smar tImage	Lite	OSD.
There	are	three	mode s	to	be...

11
	Installation
•	
Follow	the	instruction	and	complete	the	
installation.
•	
You	can	launch	after	installation	is	
completed.
•	
If	you	want	to	launch	later,	you	can	either	
click	the	shor tcut	on	desktop	or	toolbar.
First launch -Wizard
•	
The	first	time	after	installation	of	
Smar tControl	Lite,	it	will	automatically	go	
to	Wizard	for	first	time	launch.
•	The	wizard	will	guide	you	through	
adjustment	your	monitor	performance	step	
by	step.
•	You	can	go	to	Plug-in	menu	to	launch	
wizard	later	on	as...

12
	Start with Standard pane:
Adjust menu:
•	
Adjust	Menu	allow	you	to	adjust	Brightness,	
Contrast,	Focus,	Position	and	Resolution.	
•	You	can	follow	the	instruction	and	do	the	
adjustment.	
•	Cancel	prompts	user	if	you	want	to	cancel	
installation.	

3.	Image	Optimization  

13
Color menu: 
•	Color	Menu	allow	you	to	adjust	RGB,	
Black	Level,	White	Point,	Color	Calibration,	
and	Smar tImage	Lite	(Please	refer	to	
Smar tImage	Lite	section).	
•	You	can	follow	the	instruction	and	do	the	
adjustment.	
•	Refer	to	below	table	for	sub-menu	item	
base	on	your	input.	
•	Example	for	Color	Calibration:	
1.	"Show	Me"	star ts	color	calibration	tutorial.
2.	Star t	-	star ts	the	6-step	color	calibration	
sequence.
3.	
Quick	View	loads	the	before/after	images.
4.	To	return	to	Color...

14
First color Calibration Screen: 
•	Previous	button	is	disabled	until	the	second	
color	screen.	
•	Next	goes	to	the	succeeding	target	
(6-targets).	
•	Final	next	goes	File>Presets	pane.	
•	Cancel	closes	the	UI	and	returns	to	the	
plug	in	page.
SmartImage Lite	
Allows	user	to	change	setting	for	better	display	
setting	based	on	content.
When	Enter tainment	is	set,	Smar tContrast	and	
Smar tResponse	are	enabled.
Options>Preferences	-	Will	only	be	active	
when	selecting	Preferences	from	the	drop-
down...

15
menu.	On	a	non-suppor ted	display	capable	of	
DDC/CI,	only	the	Help	and	Options	tabs	are	
available.	All	other	Smar tControl	Lite	tabs	are	
not	available.
•	Display	the	Source	instruction	pane	and	
current	input	source	setting.	
•	On	single	input	displays,	this	pane	will	not	
be	visible.
Options>Audio	-	Will	only	be	active	when	
selecting	Audio	from	the	drop-down	Options	
menu.
On	a	non-suppor ted	display	capable	of	DDC/
CI,	only	the	Help	and	Options	tabs	are	available.	
Help>User Manual	-	Will	only...

16
Context Sensitive menu
The	Context	Sensitive	menu	is	Enabled	by	
default.	If	Enable	Context	Menu	has	been	
checked	in	the	Options>Preferences	pane,	then	
the	menu	will	be	visible.
The Context Menu has four entries:
•	
Smar tControl	Lite	-	When	selected	the	
About	Screen	is	displayed.
•	Select	Preset	-	Provides	a	hierarchical	
menu	of	saved	presets	for	immediate	use.	
A	check	mark	shows	the	currently	selected	
preset.	Factor y	Preset	can	also	be	called	
from	the	drop	down	menu.
•	Tune	Display	-	Opens...

17
4. PowerSensor™
(Available for model 247E3LPH only)
PowerSensor	is	a	unique	environmentally	friendly	technology	from	Philips	which	enables	user	to	save	
up	to	80%	of	power	consumption.	In	line	with	Philip’s	Sense	and	Simplicity	Promise,	this	user	friendly	
technology	works	for	you	right	out	of	the	box	without	any	hardware	or	software	installation,	and	
without	any	user	inter vention	in	the	default	mode.
 How does it work?
•	PowerSensor	works	on	principle	of	transmission	and	reception	of	harmless...

18
•	You	can	return	to	the	default	mode	at	any	time	(Setting	3).
Hot keySensor distance
Power Sensor      \
      3
 How to adjust settings
If	PowerSensor	is	not	operating	corr ectly	insi de	or	outs ide	the	defa ult	rang e,	here ’s	how	to	f ine -tune	
detection:	
•	Press	the	PowerSensor	hot	key.	
•	You	will	find	the	default	position	‘3’	on	the	adjustment	bar.
•	Adjust	the	PowerSensor	detection	adjustment	to	Setting	4	and	press	OK.
•	Test	the	new	setup	to	see	if	PowerSensor	properly	detects	you	in	your...