Philips 234cl2sb User Manual

39
Taiwan
Company:	FETEC .CO	
Address:	3F,	No.6, 	Lane	205, 	Sec.	1,	Chang	Hsing	
Rd, 	Lu	Chu	Hs, 	Taoyuan, 	Taiwan	R.O.C	33800	
Consumer	Care: 	0800-231-099	
Tel:	(03)2120336	
Fax: 	(03)3129184	
E-mail: 	[email protected]	
Ser vice	hours: 	Mon.~Fri.	8:30am~7:00pm
Thailand	
Company:	Axis	Computer	System	Co., 	Ltd.
Address:	1421 	Soi 	Lardprao 	94, 	Srivara 	Town	
In 	Town 	Soi 	3 	Road, 	Wangthonglang, 	Bangkok	
10310	 Thailand
Tel:	(662)	934-5498
Fax: 	(662)	934-5499	
E-mail: 	[email protected]...

40
Your	Philips	F1rst	Choice	Warranty(USA)
Thank	you	for	purchasing	this	Philips	monitor.
All	Philips	monitors	are	designed	
and	manufactured	to	high	
standards	and	deliver	high-quality	
performance, 	ease	of	use	and	
ease	of	installation. 	Should	you	
encounter	any	difficulties	while	installing	or	using	
this	product,	please	contact	Philips	directly	to	
benefit	from	your	Philips	F1rst	Choice	 Warranty.	
This	two-year	ser vice	warranty	entitles	you	to	a	
swap	model	on-site	within	48	hours	of	your	call...

41
Where	CAN	I	GET	MORE	INFORMATION?
For	more	information,	contact	the	Philips	
Customer	Care	Center	by	calling	(877)	835-
1838	(U.S.A.	customers	only)	or	(919)	573-
7855.	
Before	Requesting	Service...
Please	check	your	owner's	manual	before	
requesting	ser vice. 	Adjustments	of	the	controls	
discussed	there	may	save	you	a	ser vice	call. 	
TO	GET	WARRANTY	SERVICE	IN	U.S.A., 	
PUERTO	RICO	OR	U.S.	VIRGIN	ISLANDS...
Contact	the	Philips	Customer	Care	Center	
phone	number	listed	below	for	product...

42
Your	International	Guarantee
Dear	Customer,
Thank	you	for	purchasing	this	Philips	product	
which	has	been	designed	and	manufactured	to	
the	highest	quality	standards.	
If,	unfor tunately, 	something	should	go	wrong	
with	this	product	Philips	guarantees	free	of	
charge	labor	and	replacement	par ts	irrespective	
of	the	countr y	where	it	is	repaired	during	a	
period	of 	12 	months 	from 	date 	of 	purchase. 	This	
international	Philips	guarantee	complements	the	
existing	national	guarantee	obligations	to...

43
7.	Troubleshooting	&	FAQs
7.1	Troubleshooting
This	page	deals	with	problems	that	can	be	
corrected	by	a	user.	If	the	problem	still	persists	
after	you	have	tried	these	solutions, 	contact	
Philips	customer	ser vice	representative.
	 Common	Problems
No	Picture	(Power	LED	not	lit)
•	Make	sure	the	power	 cord	is	plugged	 into	
the	power	 outlet	and	into	 the	back	 of	the	
monitor. 	
•	First,	ensure	 that	the	power	 button	 on	the	
front	 of	the	 monitor	 is	in	 the	 OFF	 position, 	
then	press	 it	to...

44
Horizontal	flicker	appears
•	Adjust	the	image	 using	the	“Auto” 	function	
in	 OSD	 Main	Controls. 	
•	Eliminate	 the	ver tical	 bars	using	 the	Phase/
Clock	 of	Setup	 in	OSD	 Main	Controls. 	It	 is	
valid	 only	in	VGA	 mode.
Image	appears	blurred, 	indistinct	or	too	dark
•	Adjust	the	contrast	 and	brightness	 on	
On-Screen	 Display.
An	"after-image", 	"burn-in"	or	"ghost	image"	
remains	after	the	power	has	been	turned	off.
•	Uninterrupted	display	of	still	 or	static	
images...

45
7.2	SmartControl	Premium	FAQs
Q1.	 I	change	the	monitor	on	a	PC	to	a	
different	one	and	the	SmartControl	
Premium	becomes	un-usable,		what	do	
I	do?
Ans.:	 Restar t	your	PC	and	see	if	
Smar tControl	Premium	can	work. 	
Otherwise,	you	will	need	to	remove	
and	re-install	Smar tControl	Premium	to	
ensure	proper	driver	is	installed.
Q2.	 The	SmartControl	Premium	functions	
worked	well	before, 	but	it	does	not	
work	anymore,	what	can	I	do?
Ans.:	 If	the	following	actions	were	executed, 	
the	monitor	driver...

46
7.3	General	FAQs
Q1:		 When 	I	 install 	my 	monitor 	what 	should	
I	do	if	the	screen	shows	'Cannot	
display	this	video	mode'?
Ans.:	 Recommended	resolution	for	Philips	
23": 	1920	x	1080	@60Hz.
•	Unplug	 all	cables, 	then	 connect	 your	PC	to	
the	 monitor	 that	you	used	 previously. 	
•	In	the	 Windows	 Star t	Menu, 	select	 Settings/
Control	 Panel.	In	 the	 Control	 Panel	
Window, 	select	 the	Display	 icon.	Inside	 the	
Display	 Control	 Panel,	select	 the	'Settings'	
tab....

47
1.	Color	Temperature; 	The	 six	settings	 are	
5000K,	6500K, 	7500K, 	8200K, 	9300K	 and	
11500K. 	With	 settings	 in	the	 5000K	 range	
the	panel	 appears	 ‘warm,'	with	a	red-white	
color	 tone,	while	 a	11500K	 temperature	
yields	‘cool,	blue-white	 toning."	
2.	sRGB;	this	 is	a	standard	 setting	for	ensuring	
correct	 exchange	 of	colors	 between	
different	 device	(e.g.	digital	 cameras, 	
monitors, 	printers, 	scanners, 	etc)	
3.	User	 Define; 	the	 user	 can	choose	 his/her	
preference...

2010	©	Koninklijke	Philips	Electronics	N.V.		All	rights	reserved.
Philips	and	the	Philips	Shield	Emblem	are	registered	trademarks	of	Koninklijke	Philips	Electronics	N.V. 	and	are	used	under	license	from	Koninklijke	Philips	Electronics	N.V.
Specifcations	are	subject	to	change	without	notice.
Version:	M2234CLE1T