Home > Philips > Monitor > Philips 230c1hsb User Manual

Philips 230c1hsb User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Philips 230c1hsb User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    FAQs (Frequently Asked Questions)
    XGA monitor has 1024x3 (R, G, B) x 768 pixels and a higher resolution \
    may not be 
    available without additional software processing. The panel is designed \
    to optimize 
    the display for a 65MHz dot clock, one of the standards for XGA displays\
    . Since the 
    vertical/horizontal frequency for this dot clock is 60Hz/48kHz, the opti\
    mum frequency 
    for this monitor is 60Hz.
     
    Q: What kind of wide-angle technology is available? How does it work?
    A: The TFT LCD panel is an element that controls/displays the inlet of a b\
    acklight 
    using the dual-refraction of a liquid crystal. Using the property that t\
    he projection of 
    inlet light refracts toward the major axis of the liquid element, it con\
    trols the direction 
    of inlet light and displays it. Since the refraction ratio of inlet ligh\
    t on liquid crystal 
    varies with the inlet angle of the light, the viewing angle of a TFT is \
    much narrower 
    than that of a CDT. Usually, the viewing angle refers to the point where\
     the contrast 
    ration is 10. Many ways to widen the viewing angle are currently being d\
    eveloped and 
    the most common approach is to use a wide viewing angle film, which wide\
    ns the 
    viewing angle by varying the refraction ratio. IPS (In Plane Switching)\
     or MVA (Multi 
    Vertical Aligned) is also used to give a wider viewing angle. 
    Q: Why is there no flicker on an LCD Monitor?
    A: Technically speaking, LCDs do flicker, but the cause of the phenomenon \
    is 
    different from that of a CRT monitor -- and it has no impact of the ease\
     of viewing. 
    Flickering in an LCD monitor relates to usually undetectable luminance c\
    aused by the 
    difference between positive and negative voltage. On the other hand, CRT\
     flickering 
    that can irritate the human eye occurs when the on/off action of the flu\
    orescent object 
    becomes visible. Since the reaction speed of liquid crystal in an LCD pa\
    nel is much 
    slower, this troublesome form of flickering is not present in an LCD dis\
    play.
     
    Q: Why is an LCD monitor virtually low of Electro Magnetic Interference?
    A: Unlike a CRT, an LCD monitor does not have key parts that generate Elec\
    tro 
    Magnetic Interference, especially magnetic fields. Also, since an LCD di\
    splay utilizes 
    relatively low power, its power supply is extremely quiet.
     
     
    RETURN TO TOP OF THE PAGE
    file:///D|/songaiyu/PHILIPS/PHILIPS%20230C1-081205%20Fian/lcd/manual/ENG\
    LISH/PRODUCT/safety/saf_faq.htm (7 of 9)2008/12/18 N
    SH 10:33:50 
    						
    							
    FAQs (Frequently Asked Questions)
    Ergonomics, Ecology and Safety Standards
    Q:
     What is the CE mark?
    A: The CE (Conformité Européenne) mark is required to be displayed\
     on all regulated 
    products offered for sale on the European market. This CE mark means t\
    hat a 
    product complies with the relevant European Directive. A European Direct\
    ive is a 
    European Law that relates to health, safety, environment and consumer \
    protection, 
    much the same as the U.S. National Electrical Code and UL Standards.
     
    Q: Does the LCD monitor conform to general safety standards?
    A: Yes. Philips LCD monitors conform to the guidelines of MPR-II and TCO 9\
    9/03 
    standards for the control of radiation, electromagnetic waves, energy re\
    duction, 
    electrical safety in the work environment and recyclability. The specifi\
    cation page 
    provides detailed data on safety standards.
     
    Q:
     After I change new PC, I found this information on screen, how can I do\
    ?
     
    A:
     Because you activate Theft Deterrence function in SmartControl II. Plea\
    se contact 
    IT manager or Philips Service Center.
     
    More information is provided in the Regulatory Information section.
    RETURN TO TOP OF THE PAGE
    file:///D|/songaiyu/PHILIPS/PHILIPS%20230C1-081205%20Fian/lcd/manual/ENG\
    LISH/PRODUCT/safety/saf_faq.htm (8 of 9)2008/12/18 N
    SH 10:33:50 
    						
    							
    FAQs (Frequently Asked Questions)
            
    file:///D|/songaiyu/PHILIPS/PHILIPS%20230C1-081205%20Fian/lcd/manual/ENG\
    LISH/PRODUCT/safety/saf_faq.htm (9 of 9)2008/12/18 N
    SH 10:33:50 
    						
    							
    Regulatory Information
        
            
     
     
    •
    TCO06 Information
     •
    Recycling Information for Customers
     •Waste Electrical and Electronic 
    Equipment-WEEE
     •
    CE Declaration of Conformity
     •Energy Star Declaration
     
    •Federal Communications 
    Commission (FCC) Notice (U.S. 
    Only)
     •
    FCC Declaration of Conformity
     •Commission Federale de la 
    Communication (FCC Declaration)
     •EN 55022 Compliance (Czech 
    Republic Only)
     •
    Polish Center for Testing and 
    Certification Notice
     
     
    •North Europe (Nordic Countries) 
    Information
     •BSMI Notice (Taiwan Only)
    • Ergonomie Hinweis (nur 
    Deutschland)
     .
    Philips End-of-Life Disposal
     •
    Information for UK only
     •China RoHS
     •Safety Information 
     •Troubleshooting
     •Other Related Information
     •
    Frequently Asked Questions (FAQs)
     
    Regulatory Information
    Model ID: 230C1
    Model No: MWC1230F
    TCO06 Information
    Congratulations! 
    The product you have just purchased carries the TCO’06 Media Displays\
     label. This 
    means that your display is designed and manufactured according to some o\
    f the 
    strictest performance and environmental criteria in the world. The manuf\
    acturer of 
    this display has selected it to be certified to TCO’06 Media Displays\
     as a sign of 
    usability, high performance and reduced impact on the natural environmen\
    t.
    Products certified to TCO´06 Media Displays are specifically designed\
     for high quality reproduction of moving 
    images. Features such as luminance, color rendition and response time ar\
    e important when watching TV or 
    working with media, graphics, web design and other applications that dem\
    and outstanding moving images. *
     
    Other features of TCO’06 Media Displays:
    Ergonomics
     
    l     Good visual ergonomics and image quality in order to reduce vision and s\
    train problems. Criteria for 
    luminance, contrast, resolution, reflectance, color rendition and respon\
    se time.
     
    Energy
    l     Energy saving mode – beneficial both for the user and the environment\
     l     Electrical safety
    Emissions
    l     Low electromagnetic fields surrounding the display
    Ecology
    l     Product is designed for recycling. Manufacturer must have a certified en\
    vironmental management 
    system such as EMAS or ISO 14 001 
    l     Restrictions on 
    m     Chlorinated and brominated flame retardants and polymers. m     Hazardous heavy metals such as cadmium, mercury, hexavalent chromium and\
     lead. 
    All TCO labelled products are verified and certified by TCO Development,\
     an independent third party labelling 
    file:///D|/songaiyu/PHILIPS/PHILIPS%20230C1-081205%20Fian/lcd/manual/ENG\
    LISH/PRODUCT/safety/regs/regulat.htm (1 of 12)2008/12/18 N
    SH 10:34:20 
    						
    							
    Regulatory Information
    organization. For over 20 years, TCO Development has been at the forefro\
    nt of moving the design of IT 
    equipment in a more user-friendly direction. Our criteria are developed \
    in collaboration with an international 
    group of researchers, experts, users and manufacturers. Since the progra\
    m’s inception, TCO labelled products 
    have grown in popularity and are now requested by users and IT-manufactu\
    rers all over the world.Full specifications and lists of certified products can be found on our \
    homepage –  www.tcodevelopment.com 
    * For a display used primarily for conventional work tasks such as word \
    processing, we recommend a display  certified to our office display series TCO’03 Displays or later versi\
    on.   
      
    RETURN TO TOP OF THE PAGE
    Recycling Information for Customers
    Philips establishes technically and economically viable objectives to op\
    timize the environmental performance of 
    the organizations product, service and activities.
    From the planning, design and production stages, Philips emphasizes the \
    important of making products that 
    can easily be recycled. At Philips, end-of-life management primarily ent\
    ails participation in national take-back 
    initiatives and recycling programs whenever possible, preferably in coop\
    eration with competitors.
    There is currently a system of recycling up and running in the European \
    countries, such as The Netherlands, 
    Belgium, Norway, Sweden and Denmark.
    In U.S.A., Philips Consumer Electronics North America has contributed fu\
    nds for the Electronic Industries 
    Alliance (EIA) Electronics Recycling Project and state recycling initi\
    atives for end-of-life electronics products 
    from household sources. In addition, the Northeast Recycling Council (N\
    ERC) - a multi-state non-profit 
    organization focused on promoting recycling market development - plans t\
    o implement a recycling program.
    In Asia Pacific, Taiwan, the products can be taken back by Environment P\
    rotection Administration (EPA) to 
    follow the IT product recycling management process, detail can be found \
    in web site www.epa.gov.tw
    The monitor contains parts that could cause damage to the nature environ\
    ment. Therefore, it is vital that the monitor is 
    recycled at the end of its life cycle. 
    For help and service, please contact Consumers Information Center or F1rst Choice Contact Information 
    Center in each country or the following team of Environmental specialist can h\
    elp. 
    Mrs. Argent Chan,  Environment Manager 
    Philips Consumer Lifestyle 
    E-mail: [email protected] 
    Tel: +886 (0) 3 222 6795
    Mr. Maarten ten Houten - Senior Environmental Consultant 
    Philips Consumer Electronics 
    E-mail: [email protected] 
    Tel: +31 (0) 40 27 33402
    file:///D|/songaiyu/PHILIPS/PHILIPS%20230C1-081205%20Fian/lcd/manual/ENG\
    LISH/PRODUCT/safety/regs/regulat.htm (2 of 12)2008/12/18 N
    SH 10:34:20 
    						
    							
    Regulatory Information
    Mr. Delmer F. Teglas 
    Philips Consumer Electronics North America 
    E-mail: [email protected] 
    Tel: +1 865 521 4322
     
    RETURN TO TOP OF THE PAGE
    Waste Electrical and Electronic Equipment-WEEE
    Attention users in European Union private households
     This marking on the product or on its packaging illustrates that, under\
     European Directive 
    2002/96/EG governing used electrical and electronic appliances, this pro\
    duct may not be disposed of with 
    normal household waste. You are responsible for disposal of this equipme\
    nt through a designated waste 
    electrical and electronic equipment collection. To determine the locatio\
    ns for dropping off such waste electrical 
    and electronic, contact your local government office, the waste disposal\
     organization that serves your 
    household or the store at which you purchased the product.
    Attention users in United States:
    Like all LCD products, this set contains a lamp with Mercury. Please dis\
    pose of according to all Local, State 
    and Federal laws. For the disposal or recycling information, contact www.mygreenelectronics.com or www.eiae.
    org. 
    RETURN TO TOP OF THE PAGE
    CE Declaration of Conformity
    Philips Consumer Electronics declare under our responsibility that the p\
    roduct is in conformity with the following 
    standards  
    - EN60950-1:2001 (Safety requirement of Information Technology Equipmen\
    t)  
    - EN55022:1998 (Radio Disturbance requirement of Information Technology\
     Equipment)  
    - EN55024:1998 (Immunity requirement of Information Technology Equipmen\
    t)  
    - EN61000-3-2:2000 (Limits for Harmonic Current Emission)  
    - EN61000-3-3:1995 (Limitation of Voltage Fluctuation and Flicker) 
    following provisions of directives applicable 
    - 73/23/EEC (Low Voltage Directive)  
    - 89/336/EEC (EMC Directive)  
    - 93/68/EEC (Amendment of EMC and Low Voltage Directive)  
    and is produced by a manufacturing organization on ISO9000 level. 
    file:///D|/songaiyu/PHILIPS/PHILIPS%20230C1-081205%20Fian/lcd/manual/ENG\
    LISH/PRODUCT/safety/regs/regulat.htm (3 of 12)2008/12/18 N
    SH 10:34:20 
    						
    							
    Regulatory Information
    The product also comply with the following standards  
    - ISO9241-3, ISO9241-7, ISO9241-8 (Ergonomic requirement for CRT Monito\
    r)  
    - ISO13406-2 (Ergonomic requirement for Flat Panel Display)  
    - GS EK1-2000 (GS specification)  
    - prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual\
     Display)  
    - MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields\
    )  
    - TCO99, TCO03 (Requirement for Environment Labelling of Ergonomics, \
    Energy, Ecology and Emission, 
    TCO: Swedish Confederation of Professional Employees) for TCO versions \
     RETURN TO TOP OF THE PAGE
     
    Energy Star Declaration
    This monitor is equipped with a function for saving energy which support\
    s the VESA Display 
    Power Management (DPM)
      standard. This means that the monitor must be connected to a 
    computer which supports VESA DPM. Time settings are adjusted from the sy\
    stem unit by 
    software.
     VESA State LED Indicator Power Consumption
    Normal operation ON (Active) Blue < 50W (typ.)
    Power Saving
    Alternative 2
    One step Sleep
    Blinking Bule LED  < 0.5 W
    Switch Off Blue LED off  < 0.5 W
    As an ENERGY STAR® Partner, PHILIPS has determined that this product meets 
    the 
    ENERGY STAR® guidelines for energy efficiency.
    We recommend you switch off the monitor when it is not in use for a long\
     time.
     
     
    RETURN TO TOP OF THE PAGE
    Federal Communications Commission (FCC) Notice (U.S. Only)
    file:///D|/songaiyu/PHILIPS/PHILIPS%20230C1-081205%20Fian/lcd/manual/ENG\
    LISH/PRODUCT/safety/regs/regulat.htm (4 of 12)2008/12/18 N
    SH 10:34:20 
    						
    							
    Regulatory Information
    This equipment has been tested and found to comply with the limits for a\
     Class B digital 
    device, pursuant to Part 15 of the FCC Rules. These limits are designed \
    to provide 
    reasonable protection against harmful interference in a residential inst\
    allation. This 
    equipment generates, uses and can radiate radio frequency energy and, if\
     not installed and 
    used in accordance with the instructions, may cause harmful interference\
     to radio 
    communications. However, there is no guarantee that interference will no\
    t occur in a 
    particular installation. If this equipment does cause harmful interferen\
    ce to radio or 
    television reception, which can be determined by turning the equipment o\
    ff and on, the user 
    is encouraged to try to correct the interference by one or more of the f\
    ollowing measures:
     
    l     Reorient or relocate the receiving antenna. l     Increase the separation between the equipment and receiver. l     Connect the equipment into an outlet on a circuit different from that to\
     which the receiver is connected. l     Consult the dealer or an experienced radio/TV technician for help. 
    Changes or modifications not expressly approved by the party responsible\
     for compliance 
    could void the users authority to operate the equipment. 
    Use only RF shielded cable that was supplied with the monitor when conne\
    cting this monitor to a computer 
    device. 
    To prevent damage which may result in fire or shock hazard, do not expos\
    e this appliance to rain or excessive 
    moisture. 
    THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN IN\
    TERFERENCE-
    CAUSING EQUIPMENT REGULATIONS.  RETURN TO TOP OF THE PAGE
     
    FCC Declaration of Conformity
    Trade Name: Philips 
    Responsible Party:  Philips Consumer Electronics North America  
    P.O. Box 671539  
    Marietta , GA 30006-0026  
    1-888-PHILIPS (744-5477) 
    Declaration of Conformity for Products Marked with FCC Logo,  
    United States Only 
     
    file:///D|/songaiyu/PHILIPS/PHILIPS%20230C1-081205%20Fian/lcd/manual/ENG\
    LISH/PRODUCT/safety/regs/regulat.htm (5 of 12)2008/12/18 N
    SH 10:34:20 
    						
    							
    Regulatory Information
     
    This device complies with Part 15 of the FCC Rules. Operation is subject\
     to the following two conditions: (1) this device may not 
    cause harmful interference, and (2) this device must accept any interf\
    erence received, including interference that may cause 
    undesired operation. 
     
    RETURN TO TOP OF THE PAGE
    Commission Federale de la Communication (FCC Declaration)
    Cet équipement a été testé et déclaré conforme auxlimi\
    tes des appareils numériques de 
    class B,aux termes de larticle 15 Des règles de la FCC. Ces limites \
    sont conçues de façon 
    à fourir une protection raisonnable contre les interférences nuisi\
    bles dans le cadre dune 
    installation résidentielle. CET appareil produit, utilise et peut é\
    mettre des hyperfréquences 
    qui, si lappareil nest pas installé et utilisé selon les consign\
    es données, peuvent causer 
    des interférences nuisibles aux communications radio. Cependant, rien\
     ne peut garantir 
    labsence dinterférences dans le cadre dune installation particuliè\
    re. Si cet appareil est la 
    cause dinterférences nuisibles pour la réception des signaux de r\
    adio ou de télévision, ce 
    qui peut être décelé en fermant léquipement, puis en le rem\
    ettant en fonction, lutilisateur 
    pourrait essayer de corriger la situation en prenant les mesures suivant\
    es:
     
    l     Réorienter ou déplacer lantenne de réception. l     Augmenter la distance entre léquipement et le récepteur. l     Brancher léquipement sur un autre circuit que celui utilisé par l\
    e récepteur. l     Demander laide du marchand ou dun technicien chevronné en radio/té\
    lévision. 
    Toutes modifications nayant pas reçu lapprobation des services comp\
    étents en matière de 
    conformité est susceptible dinterdire à lutilisateur lusage du \
    présent équipement.
    Nutiliser que des câbles RF armés pour les connections avec des o\
    rdinateurs ou périphériques. 
    CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU R\
    EGLEMENT 
    SUR LE MATERIEL BROUILLEUR DU CANADA.  RETURN TO TOP OF THE PAGE
    EN 55022 Compliance (Czech Republic Only)
        
    file:///D|/songaiyu/PHILIPS/PHILIPS%20230C1-081205%20Fian/lcd/manual/ENG\
    LISH/PRODUCT/safety/regs/regulat.htm (6 of 12)2008/12/18 N
    SH 10:34:20 
    						
    							
    Regulatory Information
    RETURN TO TOP OF THE PAGE
    Polish Center for Testing and Certification Notice
    The equipment should draw power from a socket with an attached protectio\
    n circuit (a three-prong socket). All 
    equipment that works together (computer, monitor, printer, and so on) \
    should have the same power supply 
    source.
    The phasing conductor of the rooms electrical installation should have \
    a reserve short-circuit protection device 
    in the form of a fuse with a nominal value no larger than 16 amperes (A\
    ).
    To completely switch off the equipment, the power supply cable must be r\
    emoved from the power supply 
    socket, which should be located near the equipment and easily accessible\
    .
    A protection mark B confirms that the equipment is in compliance with \
    the protection usage requirements of 
    standards PN-93/T-42107 and PN-89/E-06251.
    RETURN TO TOP OF THE PAGE
       
    file:///D|/songaiyu/PHILIPS/PHILIPS%20230C1-081205%20Fian/lcd/manual/ENG\
    LISH/PRODUCT/safety/regs/regulat.htm (7 of 12)2008/12/18 N
    SH 10:34:20 
    						
    All Philips manuals Comments (0)

    Related Manuals for Philips 230c1hsb User Manual