Philips 22pfl5604 User Manual

							9
Adjust TV  volume
 
 
To increase or decrease volume
Press  • 
 +/-.
Press  • VOLUME +/- on the side of the T V.
To mute or unmute sound
Press  • 
 to mute the sound.
Press  • 
 again to restore the sound.
Use teletext
  
1 Press MHEG/TELETEXT.
The main index page appears.   »
2  Select a page as follows:
Press the  • Numeric buttons to enter 
a page number
Press  • P +/- or 
 to view the nex t 
or previous page
Press the  • Colour buttons to select a 
colour coded item
Press  • 
 BACK to return to a 
previously viewed page
3 Press MHEG/TELETEXT to exit teletext.
 
1 Press OK.
The channel grid appears.   »
2 Press  to browse the channel grid 
and preview a channel.
The channel content is displayed after    »
a lapse of approximately two seconds.
3  When you find a channel of your choice, 
press OK to watch.
The selected channel appears.   »
Watch connected devices
Note
Switch on the device before selecting it as a   •source on the T V.
Use the source button
 
1 Press  SOURCE.
The source list appears.   »
2 Press the Navigation buttons to select a 
device.
3 Press OK to confirm your choice.
The TV switches to the selected    »
device.
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							10
Remove devices from the 
home menu
If a device is no longer connected to the TV, 
remove it from the home menu.
1 Press  (Home).
2 Press  to select a device to remove.
3 Press  OPTIONS.
The    »[Remove device] list appears.
4 Press OK and select [Remove] to remove 
the device.
The selected device is removed from    »
the home menu.
Change picture and sound 
settings
Change picture and sound settings to suit your 
preferences. You can apply pre-defined settings 
or change settings manually.
Use settings assistant
Use the settings assistant to guide you through 
the best picture and sound settings.
1 Press  (Home).
2 Press  to select [Setup] > [Picture] 
> [Settings assistant].
3 Press OK.
The    »[Settings assistant] menu appears. 
Follow the on-screen instructions to 
choose your preferred picture settings.
Use smart picture
Use smar t picture to apply pre-defined 
picture settings.
1 Press  PICTURE.
The    »[Smart picture] menu appears.
2 Press  to select one of the following 
smar t picture settings.
5  Use more of 
your product
Access TV  menus
Menus help you to install channels, change 
picture and sound settings and access other 
features.
1 Press  (Home).
The menu screen appears.   »
  
2 Press the  to select and navigate 
through one of the following menus.
• [Watch TV]Switches back to the 
aerial source if another source is 
selected.
• [Setup]Accesses menus that allow 
you to change picture, sound and 
other TV settings.
• [Add new device]Adds new devices 
to the home menu.
3 Press OK to confirm your choice.
4 Press  (Home)to exit.
Tip
After selecting   •[Add new device], follow the 
on-screen instructions to select the correct 
device and connector.
Add new deviceSetup
Watch TV
EN
Downloaded From TУ-Manual.com Manuals 
						

							11
• [Dynamic contrast]Automatically 
enhances contrast in an image. A 
[Medium] set ting is recommended.
• [Dynamic backlight]Adjusts the 
brightness of the T V backlight to 
match lighting conditions.
• [Colour enhancement]Makes 
colours more vivid and improves the 
resolution of details in bright colours. 
You can switch this feature on or off.
• [Light sensor]Dynamically adjusts picture 
settings to match lighting conditions.
• [PC mode]Adjusts the picture when a PC 
is connected to the T V via HDMI or DVI.
• [Picture format]Changes the picture 
format.
• [Horizontal shift]Adjusts the picture 
horizontally for PC-VGA or YPbPr ( 
EXT2 or EXT3).
• [Vertical shift]Adjusts the picture 
ver tically for PC-VGA or YPbPr ( EX T2 
or EXT3).
Change picture format
1 Press  FORMAT.
A picture format bar appears.   »
2 Press  to select a picture format.
The selected picture format is    »
activated.
3 Press OK to confirm your choice.
Summary of picture formats
The following picture settings can be 
configured.
Note
Depending on the format of the picture   •source, some picture set tings are not available.
• [Personal]Lists customised personal 
picture settings.
• [Vivid]Maximises picture settings.
• [Standard]Adjusts picture settings 
to suit most environments and types 
of video.
• [Movie]Applies picture settings 
ideally suited for movie viewing.
• [Game]Applies picture settings 
maximised for fast-moving games.
• [Energy saving]Applies low-energy 
picture settings.
3 Press OK to confirm your choice.
The selected smar t picture setting is    »
applied.
Manually adjust picture settings
1 Press  (Home).
2 Press  to select [Setup] > 
[Picture].
The    »[Picture] menu appears.
3 Press  to select one of the 
following picture settings.
• [Smart picture]Accesses pre-defined 
smar t picture settings.
• [Contrast]Adjusts the intensity of bright 
areas, keeping dark areas unchanged.
• [Brightness]Adjusts the intensity and 
details of dark areas.
• [Colour]Adjusts colour saturation.
• [Hue]Compensates colour variations in 
NTSC encoded transmissions.
• [Sharpness]Adjusts the level of sharpness 
in image details.
• [Noise reduction]Filters and reduces 
noise in an image.
• [Tint]Adjusts the colour balance in an 
image. 
• [Custom tint]Make a customised tint 
setting.
• [Pixel Plus HD]Digitally adjusts picture 
quality to optimal contrast, colour and 
sharpness.
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							12
Use smart sound
Use smar t sound to apply pre-defined sound 
settings.
1 Press  SOUND.
The    »[Smart sound] menu appears.
2 Press  to select one of the following 
smar t sound settings.
• [Standard]Adjusts sound settings to 
suit most environments and types of 
audio.
• [News]Applies sound settings ideally 
suited for spoken audio, such as the 
news.
• [Movie]Applies sound settings ideally 
suited for movies.
• [Personal]Applies the settings that 
were customised in the sound menu.
3 Press OK to confirm your choice.
The selected smar t sound setting is    »
applied.
Adjust sound settings
1 Press  (Home).
2 Press  to select [Setup] > [Sound].
The    »[Sound] menu appears.
3 Press  to select one of the 
following sound settings.
• [Smart sound]Accesses pre-defined 
smar t sound settings.
• [Bass]Adjusts the bass level.
• [Treble]Adjusts the treble level.
• [Volume]Adjusts the volume.
• [Balance]Adjusts the balance of the 
right and lef t speakers to best suit 
your listening position.
• [Dual I-II]Selects between audio 
languages if dual sound is broadcast.
• [Mono/Stereo]Selects between 
mono or stereo if stereo is 
broadcast.
• [TV speakers]Turns T V speakers 
on or off. Setting T V speakers 
to automatic mode turns off the 
 
[Auto format](Not for 
HDMI, YPbPr - EX T2/
EX T3 or PC mode.) 
Enlarges the picture 
automatically to best fit 
the screen. The subtitles 
remain visible.
 
[Super zoom](Not for HD 
and PC mode.) Removes 
the black bars on the side 
of 4:3 broadcasts. There is 
minimal distor tion.
 
[4:3]Shows the classic 4:3 
format.
 
[Subtitle zoom]Displays 
4:3 pictures over the full 
area of the screen, with 
sub-titles visible. Par t of 
the top of the picture is 
clipped off.
 
[Movie exp.14:9](Not for 
HD and PC mode.) Scales 
4:3 format to 14:9.
 
[Movie exp.16:9](Not for 
HD and PC mode.) Scales 
4:3 format to 16:9.
 
[Wide screen]Stretches 
the classic 4:3 format to 
16 : 9.
 
[Unscaled]Available in 
selected models with 
PC resolution under 
1024 x 768, only. Allows 
maximum sharpness. 
Some distor tion may 
be present due to the 
broadcaster’s systems. 
Set your PC resolution to 
wide screen mode for best 
results.
EN
Downloaded From TУ-Manual.com Manuals 
						

							13
• [Language]Switches to a different 
language group to display a language 
correctly when that language uses a 
different character set.
4 Press OK to confirm your choice.
5 Press MHEG/TELETEXT to exit the 
teletex t options menu.
Select teletext subpages
A teletex t page can hold several subpages. 
Subpages are displayed on a bar nex t to the 
main page number.
1 Press MHEG/TELETEXT .
The teletext screen appears.   »
2  Select a teletex t page with subpages.
3 Press  to enter a subpage.
The subpage appears.   »
4 Press  to switch between subpages.
Select T.O.P. teletext broadcasts
Table Of Pages ( T.O.P.) teletex t broadcasts 
allow you to jump from one subject to 
another without using page numbers. T.O.P. 
teletex t is not broadcast on all T V channels.
1 Press MHEG/TELETEXT.
The teletext screen appears.   »
2 Press  INFO.
The T.O.P. over view appears.   »
3 Press  to select a subject.
4 Press OK to view the page.
Create and use lists of 
favourite channels
You can create lists of your preferred TV 
channels and radio stations so that you can find 
those channels easily.
speakers when content from an 
EasyLink-compliant home theatre 
system is detected.
• [Surround]Enables spatial sound.
• [Headphone volume]Adjusts 
headphone volume.
• [Auto volume]Automatically 
reduces sudden volume changes, for 
example, when switching channels. 
When enabled, this produces a more 
consistent audio volume.
• [Delta volume]Levels out volume 
differences between channels or 
connected devices. Switch to the 
connected device before you change 
the delta volume.
Use advanced teletext 
features
Access the teletext options menu
Most of the advanced teletex t features are 
accessed via the teletex t options menu.
1 Press MHEG/TELETEXT.
The teletext screen appears.   »
2 Press  OPTIONS.
The teletext options menu appears.   »
3 Press  to select one of the following 
options.
• [Freeze Page]Freezes the current 
page.
• [Dual/Full screen]Enables and 
disables dual screen teletext, which 
splits the current channel or source 
to the lef t of the screen, with 
teletex t on the right.
• [Reveal]Hides or reveals hidden 
information on a page, such as 
solutions to riddles or puzzles.
• [Cycle subpage]Cycles through 
subpages automatically if subpages 
are available.
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							14
The channel options menu appears.   »
4 Press  to select [Mark as favourite].
5 Press OK.
The favourite lists appear.   »
6 Press  to select a favourite list to add 
the channel to.
7 Press OK.
The channel is added to the favourite    »
list.
Tip
When watching T V, press   • OPTIONS 
> [Mark as favourite] to save the current 
channel into a favourite list.
Remove a channel from a favourite 
list
Note
Select the favourite list to edit, before   •removing a channel.
1  When watching T V, press OK to display 
the channel grid.
2 Press  OPTIONS.
The channel options menu appears.   »
3 Press OK to enter [Show favourite ch.].
4 Press  to select a favourite list and 
press OK to confirm the choice.
5 Press  to choose the channel that 
you wish to remove from the list.
6 Press  OPTIONS.
7 Press  to select [Unmark as fav.].
8 Press OK.
The channel is removed from the    »
favourite list.
Tip
You can create and store up to four favourite   •lists on your T V.
Select a favourite list
1  When watching T V, press OK to display 
the channel grid.
2 Press  OPTIONS.
The channel options menu appears.   »
3 Press OK to select [Show favourite ch.].
The favourite lists appear.   »
4 Press  to select a favourite list.
5 Press OK. 
Only channels in the favourite list    »
appear in the channel grid.
View all channels
You can exit a favourite list, and view all 
installed channels.
1  When watching T V, press OK to display 
the channel grid.
2 Press  OPTIONS.
The channel options menu appears.   »
3 Select [Show favourite ch.] > [All] .
4 Press OK. 
All channels display in the channel grid.   »
Note
All favourite channels are marked by an   •asterisk in the channel grid.
Add a channel to a favourite list
1  When watching T V, switch to the channel 
you want to add to a favourite list (see 
‘Switch channels’ on page 8).
2 Press  to select a channel to add to 
a favourite list.
3 Press  OPTIONS.
EN
Downloaded From TУ-Manual.com Manuals 
						

							15
8 Press  to select [Programme no.] 
and set the channel.
9 Press OK to confirm.
10 Press  (Home) to exit.
Tip
Select   •[On timer] > [Activate] > [Of f ] to 
disable [On timer]. 
When 
  •[On timer] is [Of f ], only [Activate] can 
be selected. 
Set the T V clock before activating 
  •[On 
timer]feature.
Use TV  lock
You can prevent your children from watching 
cer tain programs or cer tain channels by locking 
the TV  controls. 
Set or change the TV lock code
1 Press  (Home).
2 Press  to select [Setup] > 
[Features] > [Set code].
3 Press  to enter the code setup.
4  Enter your code using the Numeric 
buttons.
5  Re-enter the same code in the new 
dialogue box for confirmation.
If the code is set successfully, the    »
dialogue box will disappear. However, if 
the code cannot be set, a new dialogue 
box will prompt you to re-enter the 
code.
6  If you want to change the code, select 
[Setup] > [Features] > [Change code].
7  Enter your current code using the 
Numeric buttons. 
If the code is validated, a new dialogue    »
box will prompt you to enter your 
new code.
Use timers
You can set timers to switch the TV on or 
switch to standby at a specified time.
Automatically switch the TV to 
standby (sleeptimer)
Sleeptimer switches the T V to standby af ter a 
pre-defined period of time.
Tip
You can always switch off your T V earlier or   •reset the sleeptimer during the countdown.
1 Press  (Home).
2 Press  to select [Setup] > 
[Features] > [Sleeptimer].
The    »[Sleeptimer] menu appears.
3 Press  to set the sleep time. 
The sleeptimer can be up to 180    »
minutes in steps of five minutes. If 
set to zero minutes, the sleeptimer is 
switched off.
4 Press OK to activate the sleeptimer.
The TV switches to standby after the    »
pre-defined period of time.
Automatically switch the TV on (on 
timer)
You can switch the T V to a specified channel 
at a specified time, from standby.
1 Press  (Home).
2 Press  to select [Setup] > 
[Features] > [On timer].
3 Press  to enter the [On timer] menu.
4 Press  to select [Activate] and set a 
frequency - [Daily], [Once], or [Of f ].
5 Press OK to confirm.
6 Press  to select [Time] and set the 
star ting time.
7 Press [Done] to confirm.
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							16
5  For each selection, press OK to lock or 
unlock the channel.
Note
Restar t the T V for the change to take effect.  •
Use the TV clock
You can display a clock on the TV screen.
Set the TV clock
1 Press  (Home).
2 Select [Setup] > [Features] > [Clock]
The    »[Clock] menu appears.
3 Press  or Numeric buttons to 
enter time.
4 Press [Done] to confirm.
5 Press  (Home)to exit.
Use Scenea
Scenea transforms your TV into a personalised 
photo frame. With Scenea enabled, you can 
display a single picture or a slideshow of 
pictures on your TV — perfect for par ties or 
other social gatherings.
Note
Use Eco mode to save energy when the   •Scenea wallpaper or a slideshow is displayed 
on your T V (see ‘Use Eco mode with Scenea 
wallpaper’ on page 17).
Scenea wallpaper is not available in shop 
  •mode 
(see ‘Change T V preferences’ on page 19) or 
MHEG mode (UK only).
Display a single picture with Scenea
1  While watching T V, press SCENEA.
The default Scenea picture is displayed    »
on your TV.
8  Enter the new code using the Numeric 
buttons.
A message appears prompting you    »
to enter the new code again for 
confirmation.
Tip
If you forget your code, enter ‘8888’ to   •override any existing codes.
Lock or unlock the TV
Locking the T V prevents your child from 
accessing all channels and connected devices.
1 Press  (Home).
2 Press  to select [Setup] > 
[Features] > [TV lock].
3 Press  to enter the [TV lock].
A screen appears prompting you to    »
enter a code.
4  Enter your code using Numeric buttons.
5 Press  to select [Lock] or [Unlock].
6 Press OK.
All channels and connected devices are    »
locked or unlocked.
7 Press  (Home) to exit.
Note
If you select   •[Lock], you have to enter your 
code ever y time you turn on your T V.
Lock or unlock one or more channels
1  When watching T V, press OK to display 
the channel grid.
2 Press  to select a channel to lock or 
unlock.
3 Press  OPTIONS.
4 Press  to select [Lock channel] or 
[Unlock channel] .
EN
Downloaded From TУ-Manual.com Manuals 
						

							17
3  Press any key except  (Standby-On) 
or 
 PICTURE to return to normal T V 
viewing.
Use sleeptimer with Scenea wallpaper
By default, your TV displays the Scenea picture 
or slideshow for 120 minutes before entering 
standby mode. If sleeptimer is enabled, the 
Scenea picture or slideshow is displayed for 
the duration of the sleeptimer (see ‘Use 
timers’ on page 15).
Use Eco mode with Scenea wallpaper
Using Eco mode with Scenea saves energy by 
lowering the T V brightness when a Scenea 
picture or a slideshow is displayed.
1  While a Scenea picture or slideshow is 
displayed, press 
 PICTURE.
The    »[Eco mode] menu appears.
2 Press  to select [On].
3 Press OK.
Eco mode with Scenea is enabled.   »
Watch TV in dual view
You can use the Dual View feature to display 
the TV channels and the input from a device 
with VGA or DVI connector (such as a 
computer or a satellite box) simultaneously on 
your TV.
1 Press  (Home).
2 Press  to select [Setup] > 
[Features] > [Dual View].
3 Press OK to activate [Dual View].
The main screen displays the input    »
source from DVI or VGA.
The auxiliar y screen displays the last    »
viewed TV  channel.
4 Press  (Home) to exit dual view.
2  Press any key except (Standby-On) 
or 
 PICTURE to return to normal T V 
viewing.
Personalize the Scenea picture
1  While the T V is on, connect the USB 
storage device containing your pictures 
( JPEG format only) to the USB connector 
at the side of your T V.
The home menu appears. If the home    »
menu does not appear, press 
 
(Home).
2 Select [Browse USB], then press OK.
The USB content browser appears.   »
3 Press  to navigate to the picture of 
your choice.
4 Press SCENEA.
Your picture is stored as the default    »
Scenea picture in your TV.
5  Disconnect the USB storage device. The 
device can be disconnected safely while 
the T V is on.
6  Follow the instructions to display your 
personalised Scenea picture (see ‘Display 
a single picture with Scenea’ on page 16).
Note
If the T V is reset to factor y set tings, your   •personalised Scenea picture is removed 
from the T V. Repeat these instructions to 
personalise the Scenea picture again.
Display a slideshow of pictures with 
Scenea
1  While the T V is on, connect the USB 
storage device containing your pictures 
( JPEG format only) to the USB connector 
at the side of your T V.
The home menu appears.   »
2 Press SCENEA.
All pictures in your USB storage device    »
are displayed in a slideshow, star ting 
from the default Scenea picture stored 
in your TV.
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							18
View photos
1  In the USB content browser, select 
[Picture] and press 
 to enter.
2 Press  GUIDE to switch between 
thumbnail and file browsing views.
3 Press  to select a photo or a photo 
album.
4 Press OK to view the selected photo in 
full screen mode.
Tip
When in full screen mode, press   • to move 
between photos. 
View a slide show of your photos
1  When a full screen image of a photo is 
displayed, press OK or 
.
A slide show begins from the selected    »
image.
2 Press:
• OK or 
 to pause the slide show.
The   »
 icon appears.
Press  • 
 or  to move between 
images.
Press  • BACK or 
 to stop the slide 
show. 
Change slide show settings
1  When viewing a slide show, press  
OPTIONS.
The slide show options menu appears.   »
2 Press  to select one of the following.
• [Start/Stop slide.]Star ts or stops a 
slide show.
• [Slideshow trans.]Sets the transition 
from one picture to the nex t.
• [Slideshow freq.]Sets the amount of 
time that a picture is shown.
• [Rotate image]Rotates a picture.
Note
  •[Dual View] is available only when the T V is 
connected to a device, such as a PC, via VGA 
or DVI connection.
When in Dual view mode, press 
  • +/- to 
adjust volume in the main screen and press P 
+/- or Numeric buttons to switch between 
the TV channels in the auxiliary screen.
View photos and play music 
from a USB storage device
Caution
Philips is not responsible if the USB storage   •device is not suppor ted nor is it responsible 
for damage or loss of data from the device.
Your TV is fitted with a USB connector that 
enables you to view photos or listen to music 
stored on a USB storage device.
1  Turn on the T V.
2  Connect the USB device to the USB por t 
on the side of your T V.
The home menu appears.   »
  
3 Press  to select [Browse USB].
4 Press OK to confirm.
The USB thumbnail browser appears.   »
Tip
Press   • GUIDE to switch between thumbnail 
and file browsing views.
Add new device
SetupWatch TVBrowse USB
EN
Downloaded From TУ-Manual.com Manuals