Philips 227e3lhsu User Manual

9
2. Setting up the monitor
  Remove the base
1.  You may use a flathead screwdriver to stick 
into two release hols on the hinge cover, 
and gently pr y the hinge cover to have it 
removed.
2.  Remove 4 screws and then remove the 
base from the monitor.  
 

10
3. Image Optimization
3.  The Smar tImage Lite on screen display 
will remain on screen for 5 seconds or 
you can also press 
OK button to make 
confirmation.
4.  When Smar tImage Lite is enabled, the 
sRGB scheme is disabled automatically. To 
use sRGB you need to disable Smar tImage 
Lite with the 
 button at the front bezel 
of your monitor.
Except using 
 key to scroll down, you can 
also press 
  buttons to choose and press 
OK button
 to confirm selection and close the 
Smar tImage Lite OSD....

11
3. Image Optimization
 Follow the instruction and complete the 
installation.
 You can launch after installation is 
completed.
 If you want to launch later, you can either 
click the shor tcut on desktop or toolbar.
First launch -Wizard
 The first time after installation of 
Smar tControl Lite, it will automatically go 
to Wizard for first time launch.
 The wizard will guide you through 
adjustment your monitor performance step 
by step.
 You can go to Plug-in menu to launch 
wizard later...

12
3. Image Optimization
 Start with Standard pane:
Adjust menu:
 Adjust Menu allow you to adjust Brightness, 
Contrast, Focus, Position and Resolution. 
 You can follow the instruction and do the 
adjustment. 
 Cancel prompts user if you want to cancel 
installation. 
 

13
3. Image Optimization
Color menu: 
 Color Menu allow you to adjust RGB, 
Black Level, White Point, Color Calibration, 
and Smar tImage Lite (Please refer to 
Smar tImage Lite section). 
 You can follow the instruction and do the 
adjustment. 
 Refer to below table for sub-menu item 
base on your input. 
 Example for Color Calibration: 
1.  "Show Me" star ts color calibration tutorial.
2.  Star t - star ts the 6-step color calibration 
sequence.
3.  Quick View loads the before/after...

14
3. Image Optimization
First color Calibration Screen: 
 Previous button is disabled until the second 
color screen. 
 Next goes to the succeeding target 
(6-targets). 
 Final next goes File>Presets pane. 
 Cancel closes the UI and returns to the 
plug in page.
SmartImage Lite 
Allows user to change setting for better display 
setting based on content.
When Enter tainment is set, Smar tContrast and 
Smar tResponse are enabled.
Options>Preferences - Will only be active 
when selecting...

15
3. Image Optimization
menu. On a non-suppor ted display capable of 
DDC/CI, only the Help and Options tabs are 
available. All other Smar tControl Lite tabs are 
not available.
 Display the Source instruction pane and 
current input source setting. 
 On single input displays, this pane will not 
be visible.
Options>Audio - Will only be active when 
selecting Audio from the drop-down Options 
menu.
On a non-suppor ted display capable of DDC/
CI, only the Help and Options tabs are available....

16
3. Image Optimization
Context Sensitive menu
The Context Sensitive menu is Enabled by 
default. If Enable Context Menu has been 
checked in the Options>Preferences pane, then 
the menu will be visible.
The Context Menu has four entries:
 Smar tControl Lite - When selected the 
About Screen is displayed.
 Select Preset - Provides a hierarchical 
menu of saved presets for immediate use. 
A check mark shows the currently selected 
preset. Factor y Preset can also be called 
from the drop down menu....

17
4. P o w e rSensor
4. PowerSensor™
(Available for model 227E3LPH only)
PowerSensor is a unique environmentally friendly technology from Philips which enables user to save 
up to 80% of power consumption. In line with Philip’s Sense and Simplicity Promise, this user friendly 
technology works for you right out of the box without any hardware or software installation, and 
without any user inter vention in the default mode.
  How does it work?
 PowerSensor works on principle of transmission and...

18
4. P o w e rSensor
Power Sensor            3
  How to adjust settings
If PowerSensor is not operating correctly inside or outside the default range, here’s how to f ine-tune 
detection: 
 Press the PowerSensor hot key. 
 You will find the default position ‘3’ on the adjustment bar.
 Adjust the PowerSensor detection adjustment to Setting 4 and press OK.
 Test the new setup to see if PowerSensor properly detects you in your current position.
 Note
A manually selected PowerSensor mode will remain...