Philips 222el2sb User Manual
Have a look at the manual Philips 222el2sb User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
19 Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Black Dot Defects Black dot def ects appear as pixels or sub pixels that are always dark or off. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern. These are the types of black dot defects: Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. BRIGHT DOT DEFECTS ACCEPTABLE LEVEL MODEL 222E2/222EL2 1 lit subpixel 3 2 adjacent lit subpix els 1 3 adjacent lit subpixels (one white pixel) 0 Distance between two bright dot defects* >15mm Total bright dot defects of all types 3 BLACK DOT DEFECTSACCEPTABLE LEVEL MODEL 222E2/222EL2 1 dark subpixel 5 or fewer 2 adjacent dar k subpixels 2 or fewer 3 adjacent dark subpixels 0 Distance between two black dot defects* >15mm Total black dot defects of all types 5 or fewer TOTAL DOT DEFECTSACCEPTABLE LEVEL MODEL 222E2/222EL2 Total bright or black dot defects of all types 5 or fewer Note 1 or 2 adjacent sub pix el defects = 1 dot defect This monitor is ISO9241-307 compliant.
20 4 Technical Specifications Picture/Display LCD panel type TFT-LCD Backlight CCFL (222E2), LED (222EL2) Panel size 21.5 W (54.6 cm) Aspect ratio 16:9 Pixel Pitch 0.248 x 0.248 mm Brightness 250 cd/m² Smar tContrast 500,000:1 (222E2); 20,000,000:1 (222EL2) Contrast ratio (typical) 1000:1 Response time (typical) 5 ms Optimum Resolution 1920 x 1080 @ 60Hz Viewing angle 176° (H) / 170° (V) @ C/R > 5 Picture Enhancement Smar tImage Lite Display colors 16.7 M Ver tical refresh rate 56Hz -76Hz Horizontal Frequency 30kHz - 80kHz sRGB YES Connectivity Signal input DVI-D (digital, HDCP), VGA (Analog) Input Signal Separate Sync, Sync on Green Convenience User Convenience OSD Languages English, French, German, Italian, Russian, Spanish, Simplified Chinese, Por tuguese, Turkish Other convenience VESA mount ( 100 x 100mm), Kensington lock Plug & Play Compatibility DDC/CI, sRGB, Windows 7/Vista/XP, Mac OSX, Linux Stand Tilt -5/+20
21 Power (222E2) On mode (typical) 40W Energy Consumption (EnergyStar 5.0 test method) AC Input Voltage at 100VAC +/-5VAC, 50Hz +/- 3HzAC Input Voltage at 115VAC +/-5VAC, 60Hz +/- 3Hz AC Input Voltage at 230VAC +/-5VAC, 50Hz +/ -3Hz Normal Operation (typical) 26.14W 25.93W 25.81W Sleep (typical) 0.5W 0.5W 0.5W Off 0.5W 0.5W 0.5W Heat Dissipation* AC Input Voltage at 100VAC +/-5VAC, 50Hz +/ -3Hz AC Input Voltage at 115VAC +/-5VAC, 60Hz +/ -3Hz AC Input Voltage at 230VAC +/-5VAC, 50Hz +/ -3Hz Normal Operation 89.215BTU 88.498BTU 88.089BTU Sleep (typical) 1.706BTU 1.706BTU 1.706BTU Off 1.706BTU 1.706BTU 1.706BTU Power (222EL2) On mode (typical) 19.7W Energy Consumption (EnergyStar 5.0 test method) AC Input Voltage at 100VAC +/-5VAC, 50Hz +/- 3HzAC Input Voltage at 115VAC +/-5VAC, 60Hz +/- 3Hz AC Input Voltage at 230VAC +/-5VAC, 50Hz +/ -3Hz Normal Operation (typical) 17.02W 18.46W 18.52W Sleep (typical) 0.5W 0.5W 0.5W Off 0.5W 0.5W 0.5W Heat Dissipation* AC Input Voltage at 100VAC +/-5VAC, 50Hz +/ -3Hz AC Input Voltage at 115VAC +/-5VAC, 60Hz +/ -3Hz AC Input Voltage at 230VAC +/-5VAC, 50Hz +/ -3Hz Normal Operation 58.089BTU 63.003BTU 63.208BTU Sleep (typical) 1.706BTU 1.706BTU 1.706BTU Off 1.706BTU 1.706BTU 1.706BTU Power LED indicator On mode: White, Standby/Sleep mode: White (blinking) Power Supply Build-in, 100-240VAC, 50/60Hz Dimension Product with stand (WxHxD) 528.8 x 406 x 195mm Product without stand (WxHxD) 528.8 x 336.3 x 49mm Box dimension (WxHxD) 570 x 465 x 155mm Weight Product with stand 4.25kg (222E2), 3.4kg (222EL2) Product without stand 3.95kg (222E2), 3.1kg (222EL2) Product with packaging 5.25kg (222E2), 4.4kg (222EL2)
22 Operating Condition Temperature range Storage: -20°C to 60°Coperation: 0°C to 40 °C Relative humidity 20% to 80% Altitude Non-operation: + 40,000 ft ( 12,192 m) operation: + 12,000 ft ( 3,658 m) MTBF 50,000 hrs (222E2), 30,000 hrs (222EL2) Environmental ROHS YES EPEAT Silver (www.epeat.net) Packaging 100% recyclable Compliance and standards Regulator y Approvals CE Mark, Energy Star 5.0, FCC Class B, SEMKO, TCO5.0, UL/cUL, ISO9241-307 Cabinet Color Black/Black Finish Glossy Note This data is subject to change without notice . Go to www.philips.com/suppor t to download the latest version of leaflet.
23 4.1 Resolution & Preset Modes 4.2 Automatic PowerSaving If you have VESA DPM compliance display card or software installed in y our PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will wake up automatically. The following table shows the power consumption and signaling of this automatic power saving feature: Maximum Resolution For 222E2/222EL2 1920 x 1080 at 60 Hz (analog input) 1920 x 1080 at 60 Hz (digital input) Recommended Resolution For 222E2/222EL2 1920 x 1080 at 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 640x480 59.94 37.88 800x600 60.32 48.36 1024x768 60.00 54.00 1152x864 60.00 44.77 1280x720 59.86 47.78 1280x768 59.87 49.70 1280x800 59.81 60.00 1280x960 60.00 63.89 1280x1024 60.02 47.71 1360x768 60.02 55.47 1440x900 59.90 55.94 1440x900 59.89 75.00 1600x1200 60.00 64.67 1680x1050 59.88 65.29 1680x1050 59.95 66.59 1920x1080 59.93 74.04 1920x1200 59.95 67.50 1920x1080 60.00 Power Management DefinitionVESA Mode Video H-sync V-sync Power Used LED color Active ON Yes Yes 222E2< 40W (typ.) 222EL2< 19.7W (typ.)White Sleep OFF No No < 0.5 W (typ.) White (Blinking) Switch Off OFF - - < 0.5 W (typ.) OFF Note This data is subject to change without notice . The following setup is used to measure power consumption on this monitor . Native resolution: 1920x1080. Contrast: 50% Brightness: 250 nits Color temperature: 6500k
24 5 Regulatory Information Lead-free Product Lead free display promotes environmentally sound recover y and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle. TCO Displays 5.0 Information Congratulations, Your display is designed for both you and the planet! This display carries the TCO Cer tified label. This ensures that the display is designed for minimal impact on the climate and natural environment, while offering all the performance expected from top of the line electronic products. TCO Cer tified is a third par ty verified program, where ever y product model is tested by an accredited independent test laborator y. TCO Cer tified represents one of the toughest cer tifications for displays worldwide. Some of the Usability features of the TCO Displays 5.0 requirements: Visual Ergonomics Good visual ergonomics in order to improve the working environment for the user and to reduce sight and strain problems. Impor tant parameters are: Light levels without color tint, Uniform color • and luminance, Wide color gamut Calibrated color temperature and gamma cur ve • Wide luminance level, Dark black levels, Low • motion blur Electrical Safety Product fulfills rigorous safety standards • Emissions Low alternating electric and magnetic fields • emissions Low acoustic noise emissions • Some of the Environmental features of the TCO • Displays 5.0 requirements: The brand owner demonstrates corporate • social responsibility and has a cer tified environmental management system (EMAS or ISO 14001) Ver y low energy consumption both in on- and • standby mode Restrictions on chlorinated and brominated • flame retardants, plasticizer and polymers Restrictions on heavy metals such as cadmium, • mercur y and lead (RoHS compliance) EPEAT (www.epeat.net) “The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process suppor ted by US EPA. EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes. EPEAT also provides a clear and consistent set of performance criteria for the design of products, and provides an oppor tunity for manufacturers to secure market recognition for effor ts to reduce the environmental impact of its products.”
25 Benefits of EPEAT Reduce use of primar y materials Reduce use of toxic materials Avoid the disposal of hazardous waste EPEAT’S requirement that all registered products meet ENERGY STAR’s energy efficiency specifications, means that these products will consume less energy throughout their life. CE Declaration of Conformity This product is in conformity with the following standards EN60950-1:2006 (Safety requirement of • Information Technology Equipment) EN55022:2006 (Radio Disturbance • requirement of Information Technology Equipment) EN55024:1998+A1:2001+A2:2003 (Immunity • requirement of Information Technology Equipment) EN61000-3-2:2006 (Limits for Harmonic • Current Emission) EN61000-3-3:1995+A1:2001+A2:2005 • (Limitation of Voltage Fluctuation and Flicker) following provisions of directives applicable 2006/95/EC (Low Voltage Directive) • 2004/108/EC (EMC Directive) • 2005/32/EC (EuP Directive, EC No. 1275/2008 • mplementing Directive for Standby and Off mode power consumption) and is produced by a manufacturing organization on ISO9000 level. The product also comply with the following standards ISO9241-307:2008 (Ergonomic requirement, • Analysis and compliance test methods for electronic visual displays) GS EK1-2000:2009 (GS mark requirement) • prEN50279:1998 (Low Frequency Electric and • Magnetic fields for Visual Display) MPR-II (MPR:1990:8/1990:10 Low Frequency • Electric and Magnetic fields) TCO Displays 5.0 (Requirement for • Environment Labeling of Ergonomics, Energy, Ecology and Emission, TCO: Swedish Confederation of Professional Employees) for TCO versions Energy Star Declaration (www.energystar.gov) This monitor is equipped with a function for saving energy which suppor ts the VESA Display Power Management (DPM) standard. This means that the monitor must be connected to a computer which suppor ts VESA DPM. Time settings are adjusted from the system unit by software. VESA State LED Indicator Power Consumption Normal operation ON (Active) White 222E2< 26 W (typ.) 222EL2< 17 W (typ.) Power Saving Alternative 2 One step Sleep (typ.) Switch Off White Blinking Off < 0.5 W (typ.) < 0.5 W (typ.) As an ENERGY STAR ® Par tner, we have determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. Note We recommend you switch off the monitor when it is not in use for a long time.
26 Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a par ticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tr y to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. • Increase the separation between the • equipment and receiver. Connect the equipment into an outlet on • a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ • TV technician for help. Changes or modifications not expressly approved by the par ty responsible for compliance could void the users authority to operate the equipment. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS. FCC Declaration of Conformity Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Par t 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
27 Commission Federale de la Communication (FCC Declaration) Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de lar ticle 15 Des règles de la FCC . Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre dune installation résidentielle. CET appareil produit, utilise et peut émettre des hyperfréquences qui, si lappareil nest pas installé et utilisé selon les consignes données, peuvent causer des interférences nuisibles aux communications radio. Cependant, rien ne peut garantir labsence dinterférences dans le cadre dune installation par ticulière. Si cet appareil est la cause dinterférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut être décelé en fermant léquipement, puis en le remettant en fonction, lutilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes: Réorienter ou déplacer lantenne de réception. • Augmenter la distance entre léquipement et • le récepteur. Brancher léquipement sur un autre circuit que • celui utilisé par le récepteur. Demander laide du marchand ou dun • technicien chevronné en radio/télévision. Toutes modifications nayant pas reçu lapprobation des ser vices compétents en matière de conformité est susceptible dinterdire à lutilisateur lusage du présent équipement. Nutiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. EN 55022 Compliance (Czech Republic Only)
28 Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three- prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the rooms electrical installation should have a reser ve shor t-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A). To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible. A protection mark B confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/E-06251. BSMI Notice (Taiwan Only) North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankier to VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ.