Philips 221t1sb1 User Manual

9

Note
If you cannot locate your remote control and  •want to switch on the T V from standby, press CH +/- at the side of the T V.
Switch channels
 
 
Press • CH ^/v on the remote control or 
CH +/- on the side of the T V.
Enter a channel number using the • 
Numeric buttons.
Use the channel grid.• 

Note
When you use a favourite list, you can only  •select those channels in the list.

4 
This section helps you perform basic TV 
operations.
Switch your TV on/off or to 
standby
 
 
To switch on
If the...

10
The TV switches to the selected  »
device.
Adjust TV volume
 
  
To increase or decrease volume
Press • VOL +/- on the remote control.
Press • VOL +/- on the side of the T V.
To mute or unmute sound
Press •  to mute the sound.
Press •  again to restore the sound.
Watch connected devices
Note
Switch on the device before selecting it as a  •source on the T V.
Use the source button
  
1 Press SOURCE.
The source list appears. »
2 Press the SOURCE,	▲	or	▼	buttons to 
select a device.
3 Press OK to confirm...

11
a PC IN (VGA and AUDIO IN)
Audio and video input from a computer.
  
b EXT 2 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
  
AUDIO
VG A
VG A
 
5  Connect devices
This section describes how to connect various devices with different connectors and supplements examples provided in the Quick 
Star t.
Note
Different types of connectors may be used to  •connect a device to your T V, depending on availability and your needs....

12
e AV OUT (VIDEO OUT and AUDIO 
OUT L/R)Audio and video output to analogue devices such as another T V or a recording 
device.
  
f SPDIF OUTDigital audio output to home theatres 
and other digital audio systems.
  
g  HDMIDigital audio and video input from high-definition digital devices such as Blu-ray 
players.
  
Connections via DVI or VGA require an 
additional audio cable.
AUDIOIN
c EXT 1 (SCART)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game...

13
c VIDEO
Composite video input from analogue 
devices such as VCRs.
  
d S E RV IC E
USB por t, for upgrade firmware purpose 
only.
  
Side connector
  
a COMMON INTERFACE
Slot for a Conditional Access Module 
(C AM).
  
b AUDIO L/R
Audio input from analogue devices 
connected to VIDEO.
  
1
2
3
4
English
EN
 

14
Remote control
Type: 201T1, 221T1, 231T1 RC• Batteries: 2 x A A A (LR03 type)• 
Power
Mains power: 100 -240V, 50Hz• Off mode power: < 0.5W• Ambient temperature: 5 to 40 degrees • Celsius
Supported TV mounts
To mount the TV, purchase a Philips TV mount or a VESA-compatible TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 5.5 cm from the back of the TV.
Warning
 •Follow all instructions provided with the T V mount. Koninklijke Philips Electronics N.V. bears...

15
TV channel issues
Previously installed channels do not appear in 
the channel list:
Check that the correct channel list is  •
selected.
No digital channels were found during the 
installation:
Check that the T V suppor ts DVB -T or  •
DVB -C in your countr y. See the listed 
countries on the back of the T V.
Picture issues
The TV is on, but there is no picture:
Check that the antenna is properly  •
connected to the T V.
Check that the correct device is selected  •
as the T V source.
There is sound but...

16
audio cable is connected to AUDIO L/R 
or AUDIO IN (mini-jack only).
Computer connection issues
The computer display on the TV is not stable:
Check that a suppor ted resolution and  •
refresh rate is selected on the computer.
Set the T V picture format to unscaled. •
Contact us
If you cannot resolve your problem, refer to 
the FAQs for this T V at w w w.philips.com/
suppor t. 
If the problem remains unresolved, contact 
Philips Consumer Care in your countr y as 
listed in this User Manual.
Warning
Do...

17
English
EN
 

18EN