Philips 221t1sb User Manual
Have a look at the manual Philips 221t1sb User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9 Remote control 1 26 23 16 14 13 12 11 10 17 15 181920 8 7 6 4 2 9 5 3 28 27 25 24 22 21 31323334 29 30 4 Controls Front and side controls a POWER: Switches the T V on or off. The T V is not powered off completely unless it is physically unplugged . b SOURCE: Selects connected devices. c MENU/OK : Displays the on-screen menu and confirms a selection in menus. d CH +/-: Switches to the nex t or previous channel. e VOL+/-: Increases or decreases volume. f Power indicator : Red LED: In standby mode or off. Green LED: Power on. 6 4 5 2 3 1 EN English
10
a (Standby-On)Switch the T V to standby if the T V
•
is on.
Switch the T V on if the T V is in
•
s t andby.
b 0 -9 ( Numeric buttons )
Select a channel or setting.
c PRE CH
Return to the previously viewed channel.
d TV
Press to choose T V mode.
e PC
Press to choose PC mode.
f
(Mute)
Switch the sound On or Off.
g CH Λ / V (Channel Λ / V )
Switch to the nex t or previous channel.
h ZOOM
Toggle among screen formats.
i SLEEP
Toggle to select the preset time to switch
the T V to standby mode automatically.
j
PICTURE
Toggle to select the Smar t Picture setting.
k OK
Confirm an entr y or selection and display
the channel grid, when watching T V.
l ▲ ▼ ◄ ► (Navigation buttons ) Navigate through the menus.
m INFO
Display or hide the information screen
about the selected channel.
n Colour buttons
Select tasks or options.
o SIZE
Toggle to change the font size in Teletex t
mode. (Full screen / Top half / Bottom
half )
p S U B PAG E Display the sub page when the Teletex t
information has more than one page.
q REVEAL
Reveal hidden information of Teletex t.
r HOLD
Toggle to stop the scrolling of pages to
stop the tex t decoder receiving data.
s FREEZE
Press to freeze the T V picture.
t AD (Audio Description) (For RF Digital
TV only)
UK only: Enables audio commentar y for
the visually handicapped.
u SOURCE
Select connected devices.
v EPG
Switch the Electronic Programme Guide
On or Off.
w VIDEO Press to switch to VIDEO YPbPr /
Composite /SCART mode.
x HDMI
Press to switch to HDMI mode.
y VOL +/-
Increase or decrease the volume.
z DUAL I-II
Toggle to select mono / stereo / dual I/
dual II from T V RF input.
{
SOUND
Toggle to select the Smar tsound Mode.
| MENU/EXIT Press to open or close the on-screen
menu.
} MIX Press to overlay the Teletex t page on the
T V picture.
~ TELETEXT
Press to open or close the Teletex t.
INDEX
11 English EN Press to display the index page of Te l e t e x t . € SUBTITLE In T V mode: Press to turn the • subtitle on or off. In Tex t mode: Press to open the • subtitle page. FAV Press to display the Favourite List. ‚ CH-LIST Press to display the Channel List.
12 Note If you cannot locate your remote control and •want to switch on the T V from standby, press CH +/- at the side of the T V. Switch channels Press • CH ^/v on the remote control or CH +/- on the side of the T V. Enter a channel number using the • Numeric buttons . Use the channel grid. • Note When you use a favourite list, you can only •select those channels in the list. 5 Start to use This section helps you perform basic TV operations. Switch your TV on/off or to standby To switch on If the standby indicator is off, press • POWER at the side of the T V. If the standby indicator is red, press • ( Standby-On ) on the remote control. To switch to standby Press • ( Standby-On ) on the remote control. The standby indicator switches to red. » To switch off Press • POWER at the side of the T V. The standby indicator switches off. » Tip Though your T V consumes ver y lit tle power •when in standby, energy continues to be consumed. When not in use for an ex tended period of time, disconnect the T V power cable from the power outlet. EN
13 Watch connected devices Note Switch on the device before selecting it as a •source on the T V. Use the source button 1 Press SOURCE . The source list appears. » 2 Press the SOURCE, ▲ or ▼ buttons to select a device. 3 Press OK to confirm your choice. The sTV switches to the selected » device.The TV switches to the selected » device. English EN Adjust TV volume To increase or decrease volume Press • VOL +/- on the remote control. Press • VOL +/- on the side of the T V. To mute or unmute sound Press • to mute the sound. Press • again to restore the sound.
14 Remote control Type: 201T1, 221T1, 231T1 RC • Batteries: 2 x A A A (LR03 type) • Power Mains power: 100 -240V, 50Hz • Off mode power: < 0.5W • Ambient temperature: 5 to 40 degrees • Celsius Supported TV mounts To mount the TV, purchase a Philips TV mount or a VESA-compatible TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 5.5 cm from the back of the TV. Warning • Follow all instructions provided with the T V mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper T V mounting that results in accident, injur y or damage. TV screen size (inches )Required pitch (mm) Required mounting bolts 20 100 x 1004 x M4 22 100 x 1004 x M4 23 100 x 1004 x M4 EN 6 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/suppor t. Supported display resolutions Computer formats Resolution - refresh rate: • 640 x 480 - 60Hz • 640 x 480 - 75Hz • 800 x 600 - 60Hz • 800 x 600 - 75Hz • 1024 x 768 - 60Hz • 1024 x 768 - 75Hz • 1280 x 1024 - 60Hz • 1440 x 900 - 60Hz • 1600 x 900 - 60Hz (the best for • 201T1) 1680 x 1050 - 60H z • 1920 x 1080 - 60Hz_ RB (the best • for 221T1 and 231T1) Video formats Resolution - refresh rate: • 480i - 60Hz • 480p - 60Hz • 576i - 50Hz • 576p - 50Hz • 720p - 50Hz, 60Hz • 1080i - 50Hz, 60Hz • 1080p - 50Hz, 60Hz • Tuner/Reception/ Transmission Antenna input: 75ohm coaxial (IEC75) • DVB: DVB Terrestrial, DVB -T MPEG4 • T V system: DVB COFDM 2K /8K; PAL I, • B/G, D/K; SECAM B/G, D/K , L /L’ Video playback: NTSC , SECAM, PAL • Tuner Bands: Hyperband, S-channel, • UHF, VHF
15
To adjust the country for
auto tuning
Press MENU + UP / DOWN button to
►
select T V.
Press OK + UP / DOWN button to
►
select Countr y.
Press LEF T / RIGHT button to select the
►
item.
Audio Carrier(Analog TV
only)
Select Mono / Stereo / Dual l / Dual ll ,for
►
preference
Note
if your preference is not the workable carrier,
•the default priority will be : Dual l > Dual ll
;Stereo > Mono.
Exit
Back
A u d i o C a r r i e r S t e r e o
C h a n n e l s
Exit Back
C o u n t r y U K
C h a n n e l s
7. TV/Channel settings
This chapter provides adjust the program
related settings and the audio language related
settings
Using TV signal as the input
source.
Press MENU button to display the menu.
►
Press UP / DOWN button to select the
►
T V item.
Press OK button enter the T V sub item.
►
Press MENU button to exit the sub item.
►
C o u n t r y U K
A u d i o C a r r i e r S t e r e o
C h a n n e l s
English
EN
16 Channel Scan Use this function to fi nd and store all available •channels automatically in both digital and analog mode. Press MENU + UP / DOWN button to ► select T V. Press OK + UP / DOWN button to ► select Channels. Press OK + UP / DOWN button to ► select Channel Scan. Press OK button to execute the Channel ► Scan. Channel Scan scan both the digital and »analog channels, fi rst scan digital channels and analog channels last. Channel Scan will erase all old stored »channels scanned by previous execution. Digital channel number will assign by »LCN (Logical Channel Number) if LCN is exist. Digital channel which no LCN or LCN »confl ict will assign from 80 0 to 899. Analog channels will assign from 901 »to 999, if have channel name, will assign from 901, others will assign by frequency, 2 7 % Exit Cancel S t a t u s : S c a n n i n g . A n a l o g C h a n n e l s : 0 D i g i t a l C h a n n e l s : 0 1st Audio and 2nd Audio (Digital TV only) The Audio function allows selection of a •preferred language. If audio data in a selected language is not •broadcast, the default language audio will be played. When the languages you selected as the primar y •for Audio Language are not suppor ted, you can select language in secondar y categor y. Press MENU + UP / DOWN button to ► select T V. Press OK + UP / DOWN button to ► select 1st Audio and 2nd Audio. Press LEF T / RIGHT button to select the ► item. Exit Back C o u n t r y U K 2 n d A u d i o E n g l i s h C h a n n e l s EN
17
Single RF Scan (Digital TV
only)
Single RF Scan lets you manually add a digital
•channel to your channel list.
Press MENU + UP / DOWN button to
►
select T V.
Press OK + UP / DOWN button to
►
select Channels.
Press OK + UP / DOWN button to
►
select Single RF Scan.
Press OK button to display the DT V or
►
T V channel info.
Press LEF T / RIGHT button to change
►
RF Channel.
Press OK button to scan.
►
Exit
Back
S c a n s i n g l e R F c h a n n e l . ( D i g i t a l
O n l y )
0 %
S i g n a l S t r e n g t h 0 S i g n a l Q u a l i t y P o o r
OK Enter
If can’t scan any digital channels, only
»analog channels, will assign analog
channel from 1.
Update Scan
To check if any new channel is available. Only
•new channels found will be stored, and original
channels won’t be over writ ten..
Press MENU + UP / DOWN button to
►
select T V.
Press OK + UP / DOWN button to
►
select Channels.
Press OK + UP / DOWN button to
►
select Update Scan.
Press OK button to execute the Update
►
Scan.
2 7 %
Exit Cancel
S t a t u s : S c a n n i n g .
A n a l o g C h a n n e l s : 0
D i g i t a l C h a n n e l s : 0
English
EN
18 Channel Skip This function enables you to skip the stored •channels. Press MENU + UP / DOWN button to ► select T V. Press OK + UP / DOWN button to ► select Channels. Press OK + UP / DOWN button to ► select Channel Skip. Press OK + UP / DOWN button to ► select the channel you want to skip. Press OK button to set. A checked icon ► is a skip one. A skip channel is skipped when using CH • ^ and CH v but ton to browse the channels. A skip channel can be watch by key-in the •program number or select by list. No signal analog channel is a default skip •program. Exit Back 2 A n a l o g - - - - - 3 A n a l o g - - - - - OK Set Exit Back 8 0 1 D i g i t a l M o n o s c o p e 8 0 2 D i g i t a l M o v i n g P i c t u . . . OK Set 8 0 3 D i g i t a l H 2 6 4 _ 1 2 8 0 4 D i g i t a l H 2 6 4 _ 2 8 0 5 D i g i t a l H 2 6 4 _ 4 8 0 6 D i g i t a l H 2 6 4 _ 8 8 0 7 D i g i t a l M P E G 2 9 0 1 A n a l o g A R D Analog Manual Scan (Analog TV only) Analog Manual Scan lets you manually add an •analog channel to your channel list. Press MENU + UP / DOWN button to ► select T V. Press OK + UP / DOWN button to ► select Channels. Press OK + UP / DOWN button to ► select Analog Manual Scan. Press OK button to display the AT V or ► T V channel info. Press UP / DOWN button to select an ► item. Press OK / RIGHT button to scan up or ► down. Exit Back S e a r c h f o r a n a l o g c h a n n e l s S c a n U p S c a n D o w n EN