Philips 221t1sb User Manual

19
Channel Edit
To edit a channel number and name of a  
•channel.
 Press MENU + UP / DOWN button to 
 
►
select T V.
 Press OK + UP / DOWN button to 
 
►
select Channels.
 Press OK + UP / DOWN button to 
 
►
select Channel Edit.
 Press OK + UP / DOWN button to 
 
►
select the channel.
 Press OK button to display the change 
 
►
dialog.
Exit BackOKSet
2                                   A n a l o g                         -   -   -   -   -
3                                   A n a l o g...

20
 Press MENU + UP / DOWN button to 
 
►
select T V.
 Press OK + UP / DOWN button to 
 
►
select Channels.
 Press OK + UP / DOWN button to 
 
►
select Analog Ch Fine Tune.
 Press OK + UP / DOWN button to 
 
►
select the channel you want to fi ne tune.
 Press OK button to the Fine Tune 
 
►
dialogue.
 Press LEF T / RIGHT to fi ne tune the 
 
►
frequency.
Press OK button to save.
 
►
 Appendix
Alphabet and numeric numbers mapping table 
on the Remote control
 To edit a channel number and name of a channel...

21
on MHEG 5 application – normally it displays 
nothing. Teletext is compliant with MHEG5 
behavior, it will not show “No Teletext” when 
countr y is U.K. 
To display Teletext.Press the TELETEXT 
button.
To change the Teletext 
page. Press the UP / DOWN 
button.
To change the Teletext 
subpage. Press the SUBPAGE, and 
number button.
To stop the automatic 
page change. Press the HOLD button.
To return to the 
Teletext index page. Press the INDEX button.
To reveal the Teletext 
information.  Press the...

22
 
Press MENU button to display the menu.
 
►
 
Press UP / DOWN button to select the 
 
►
Parental item.
  Press OK button enter the Parental sub 
 
►
item.
  Press number 0 -9 button to key-in the 
 
►
correct password to select the sub item.
( The default password is 0000.)
  Press MENU button to exit the sub item.
 
►
Channel Block
 Blocks any channels that you do not want to  
•watch or that you do not want your children to 
watch
  Default value is non-block .
 
• 
Channel with a lock icon   is a...

23
 Input Block
 
To lock an input source. 
•Default value is non-block . 
•
Input source with a lock icon  
•   is a blocked 
input source.
A blocked input source can be un-locked 
 
•temporarily af ter key-in the correct password.
  Press the OK button to display the 
 
►
password dialog.
  Press the 0 -9 buttons to key-in the 
 
►
correct password.
 
All input source and locked channels will  
•temporarily un-lock 
  Af ter powering off and on the T V set, the un- 
•locked input source will be locked...

24
9.  Pixel policy
Philips strives to deliver the highest quality 
products. We use some of the industr y's 
most advanced manufacturing processes and 
practice stringent quality control. However, pixel 
or sub pixel defects on the TFT LCD panels 
used in flat panel monitors are sometimes 
unavoidable. No manufacturer can guarantee 
that all panels will be free from pixel defects, 
but Philips guarantees that any monitor with 
an unacceptable number of defects will be 
repaired or replaced under...

25
Note
A red or blue bright dot must be more than 50 
percent brighter than neighboring dots while 
a green bright dot is 30 percent brighter than 
neighboring dots.
Black Dot Defects Black dot defects appear as 
pixels or sub pixels that are always dark or 'off'. 
That is, a dark dot is a sub-pixel that stands 
out on the screen when the monitor displays a 
light pattern. These are the types of black dot 
defects:
Proximity of Pixel Defects 
Because pixel and sub pixels defects of the 
same...

26
   BRIGHT DOT DEFECTSACCEPTABLE LEVEL
  MODEL  201T1/221T1/231T1 plus
   1 lit subpixel 3
   2 adjacent lit subpixels 1
   3 adjacent lit subpixels (one white pixel) 0
  Distance between two bright dot defects* >15mm
   Total bright dot defects of all types 3
   BLACK DOT DEFECTSACCEPTABLE LEVEL
  MODEL  201T1/221T1/231T1 plus
   1 dark subpixel 5 or fewer
   2 adjacent dark subpixels 2 or fewer
   3 adjacent dark subpixels 0
  Distance between two black dot defects* >15mm
   Total black dot defects...

27
TV channel issues
Previously installed channels do not appear in 
the channel list:Check that the correct channel list is 
 
•
selected.
No digital channels were found during the 
installation: Check that the T V suppor ts DVB -T or 
 
•
DVB -C in your countr y. See the listed 
countries on the back of the T V.
Picture issues
The TV is on, but there is no picture:Check that the antenna is properly 
 
•
connected to the T V.
Check that the correct device is selected 
 
•
as the T V source.
There is...

28
The	picture	does	not	fit	the	screen;	it	is	too	
big or too small: Tr y using a different picture format.
 
•
The picture position is incorrect:
Picture signals from some devices may 
 
•
not fit the screen correctly. Check the 
signal output of the device.
Sound issues
There is a picture but no sound from the TV:
Note
If no audio signal is detected, the T V  
•automatically switches the audio output off — 
this does not indicate malfunction.
Check that all cables are properly 
 
•
connected.
Check...