Philips 221b3pc User Manual

19 The task tray has five entries:
‡Help - Access to User Manual f ile: Open 
User Manual f ile using the default browser 
window. 
‡Technical Support - displays the tech sup-
por t page. 
‡Check for Update - takes the user to PDI 
Landing and checks the user’s version 
against the most current available. 
‡About - Displays detailed reference infor-
mation: product version, release informa-
tion, and product name. 
‡Exit - Close Smar tControl Premium.
To run Smar tControl Premium again 
either...

20
Drag and Drop Windows
Once the par titions are configured and Align to 
par tition is selected a window can be dragged 
into the region and it will automatically align.  
When the window and mouse cursor are within 
the region, the region will become highlighted.
Note
If the outline of the region is not visible when 
dragging the window, “Show windows contents 
while dragging” is disabled.  To enable:
1. In Control Panel, click System.
2. Click Advanced system settings  (For Vista 
& Win7 OS, this is...

21
Note
If more than one display is attached, the user 
can select the targeted display to change the 
par tition.  The highlighted icon represents the 
current active par tition.
‡Identify Partition– Displays the outline 
grid on the desk top for the current par ti-
tion.
‡Align On/Align Off – Enables/disables the 
drag and drop auto align feature.
‡Exit – Closes Desk top Par tition and Dis-
play Tune.  To re-initialize, launch Display 
Tune from the star t menu or shor t cut on 
the desktop.
Left...

22
SmartDesktop Partition Definitions
Name Description Image
Full Desktop Applies all settings to the entire desktop.
Ver tical  Assesses the screen resolution and divides the display 
into two evenly sized ver tical regions.
For 90/270 maintain ver tical configuration.
Horizontal Assesses the screen resolution and divides the display 
into two evenly sized horizontal regions.
For 90/270 maintain horizontal configuration.
Ver tical Triple Assesses the screen resolution and divides the display 
into three...

23
Name Description Image
Horizontal Split Top Assesses the screen resolution and divides the display 
into two evenly sized horizontal regions, the top region 
is single, the bottom region is spilt into two evenly sized 
regions.
For 90 Par tition 1 on right side Ver tical Par tition 2&3 on 
left side Ver tical.
For 270 Par tition 1 on left side Ver tical Par tition 2&3 on 
right side Ver tical.
Horizontal Split 
BottomAssesses the screen resolution and divides the display into 
two evenly sized...

24
4. Power Sensor™
PowerSensor is a unique environmentally friendly technology from Philips which enables user to save 
up to 80% of power consumption.  In line with Philip’s Sense and Simplicity drive, this user friendly 
technology works for you right out of the box without any hardware or software installation, and 
without any user inter vention in the default mode.
How does it work?
v PowerSensor works on principle of transmission and reception of harmless “infrared” signals in 
order to detect...

25
Custom settings
If you prefer to be in a position outside the perimeters listed above, choose a higher strength signal 
for optimal detection efficiency: The higher the setting, the stronger the detection signal. For maximum 
PowerSensor efficiency and proper detection, please position yourself directly in front of your monitor.
v If you choose to position yourself more than 100 cm or 40 inches from the monitor use the 
maximum detection signal for distances up to 120cm or 47 inches. (setting 4)
v...

26
5. Technical Specifications
Picture/Display
Monitor panel type TFT-LCD
Backlight CCFL(221B3P) / LED(221B3LP) 
Panel size 21.5" W (54.6 cm)
Aspect ratio 16:9
Pixel Pitch0.248 x 0.248 mm
Brightness 300cd/m2 (CCFL), 250cd/m2 (LED)
Smar tContrast  500,000:1(CCFL), 20M:1 (LED)
Contrast ratio (typ.) 1000:1
Response time (typical)  5 ms
Optimum Resolution 1920x1080 @ 60Hz
Viewing angle 176° (H) / 170° (V) @ C/R > 5 
Picture Enhancement Smar tImage 
Display colors  16.7 M
Ver tical refresh rate 56Hz -76Hz...

27
Heat Dissipation* AC Input Voltage at 
100VAC +/-5VAC, 
50Hz +/-3HzAC Input Voltage at 
115VAC +/-5VAC, 
60Hz +/-3HzAC Input Voltage at 
230VAC +/-5VAC, 
50Hz +/-3Hz
Normal Operation 57.37 BTU/hr 56.89 BTU/hr 56.65 +BTU/hr
Sleep 0.34 BTU/hr 0.34 BTU/hr 0.34 BTU/hr
Off 0.34 BTU/hr 0.34 BTU/hr 0.34 BTU/hr
Power LED indicator On mode: White, Standby/Sleep mode: White (blinking)
Power Supply Build-in, 100-240VAC, 50/60Hz
Dimension
Product with stand (WxHxD)  507 x 400 x 220 mm 
Product without stand...

28
5.1 Resolution & Preset Modes
Maximum Resolution
1920 x 1080 at 60 Hz (analog input) 
1920 x 1080 at 60 Hz (digital input)
Recommended Resolution
1920 x 1080 at 60 Hz (digital input)
H. freq (kHz) Resolution V. freq (Hz)
31.47 720x400 70.09
31.47 640x480 59.94
35.00 640x480 66.67
37.86 640x480 72.81
37.50 640x480 75.00
37.88 800x600 60.32
46.88 800x600 75.00
48.36 1024x768 60.00
60.02 1024x768 75.03
63.89 1280x1024 60.02
79.98 1280x1024 75.03
55.94 1440x900 59.89
70.64 1440x900 74.98
65.29 1680x1050...