Philips 220x1sw User Manual

							3FHVMBUPSZ
*OGPSNBUJPO
ACHTUNG: BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß 
NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND. RETURN TO TOP OF THE PAGE
End-of-Life Disposal 
Your new monitor contains materials that can be recycled and reused. Spe\
cialized companies can 
recycle your product to increase the amount of reusable materials and to\
 minimize the amount to be 
disposed of. 
Please find out about the local regulations on how to dispose of your ol\
d monitor from your sales 
representative. 
(For customers in Canada and U.S.A.) 
This product may contain lead and/or mercury. Dispose of in accordance t\
o local-state and federal 
regulations. 
For additional information on recycling contact www.eia.org (Consumer Education Initiative) RETURN TO TOP OF THE PAGE
Information for UK only

 WARNING - THIS APPLIANCE MUST BE 
GROUNDING.
Important: 
This apparatus is supplied with an approved moulded 13A 
plug. To change a fuse in this type of plug proceed as 
follows: 
1. Remove fuse cover and fuse. 
2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or 
BSI approved type. 
3. Refit the fuse cover. 
If the fitted plug is not suitable for your socket outlets, it 
should be cut off and an appropriate 3-pin plug fitted in its 
place. 
If the mains plug contains a fuse, this should have a value 
of 5A. If a plug without a fuse is used, the fuse at the 
distribution board should not be greater than 5A. 
Note: The severed plug must be destroyed to avoid a 
possible shock hazard should it be inserted into a 13A 


GJMF%]-$%.POJUPS0&.1IJMJQT.QSPKFDU99&%POMJOFXBSSBOUZ:4PVSDF&/(-*4)9TBGFUZSFHTSFHVMB 
						

							3FHVMBUPSZ
*OGPSNBUJPO
socket elsewhere. 
How to connect a plug 
The wires in the mains lead are coloured in accordance 
with the following code: 
BLUE - NEUTRAL (N) 
BROWN - LIVE (L) 
GREEN & YELLOW - GROUND (G) 
1. The GREEN AND YELLOW wire must be connected to 
the terminal in the plug which is marked with the letter G 
or by the Ground symbol 
 or coloured GREEN or GREEN 
AND YELLOW. 
2. The BLUE wire must be connected to the terminal which 
is marked with the letter N or coloured BLACK. 
3. The BROWN wire must be connected to the terminal 
which marked with the letter L or coloured RED. 
Before replacing the plug cover, make certain that the cord 
grip is clamped over the sheath of the lead - not simply 
over the three wires. 




RETURN TO TOP OF THE PAGE

China RoHS
The Peoples Republic of China released a regulation called Management \
Methods for Controlling 
Pollution by Electronic Information Products or commonly referred to as\
 China RoHS. All products 
including CRT and LCD monitor which are produced and sold for China mark\
et have to meet China 
RoHS request.
GJMF%]-$%.POJUPS0&.1IJMJQT.QSPKFDU99&%POMJOFXBSSBOUZ:4PVSDF&/(-*4)9TBGFUZSFHTSFHVMB 
						

							3FHVMBUPSZ
*OGPSNBUJPO


RETURN TO TOP OF THE PAGE


Lead-free Product
GJMF%]-$%.POJUPS0&.1IJMJQT.QSPKFDU99&%POMJOFXBSSBOUZ:4PVSDF&/(-*4)9TBGFUZSFHTSFHVMB 
						

							3FHVMBUPSZ
*OGPSNBUJPO
Lead free display promotes environmentally sound recovery and disposal o\
f waste from 
electrical and electronic equipment. Toxic substances like Lead has been\
 eliminated and 
compliance with European community’s stringent RoHs directive mandating restrictions 
on hazardous substances in electrical and electronic equipment have been\
 adhered to in 
order to make Philips monitors safe to use throughout its life cycle. 
 


RETURN TO TOP OF THE PAGE

 
 

 


GJMF%]-$%.POJUPS0&.1IJMJQT.QSPKFDU99&%POMJOFXBSSBOUZ:4PVSDF&/(-*4)9TBGFUZSFHTSFHVMB 
						

							0UIFS
3FMBUFE
*OGPSNBUJPO






 

 






•  Safety and Troubleshooting

• FAQs

• Troubleshooting

• Regulatory Information

•Information  
for Users in the U.S

•Information  
for Users Outside the U.S





 


 


 
 

Other Related Information

Information for Users in the U. S.
For units set at 115 V : 
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT\
 three conductor cord 
a maximum of 15-feet long and a parallel blade, grounding type attachmen\
t plug rated 15 A, 125 V. 
For units set at 230 V: 
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT\
 three conductor cord 
a maximum of 15-feet long and a tandem blade, grounding type attachment \
plug rated 15 A, 250 V. 
Information for Users outside the U.S.
For units set at 230 V: 
Use a Cord Set consisting of a minimum 18 AWG cord and grounding type at\
tachment plug rated 
15 A, 250 V. The Cord Set should have the appropriate safety approvals f\
or the country in which 
the equipment will be installed and / or be marked HAR. 


RETURN TO TOP OF THE PAGE
 


 



 





 

 


GJMF%]-$%.POJUPS0&.1IJMJQT.QSPKFDU99&%67POMJOFXBSSBOUZ:4PVSDF&/(-*4)9TBGFUZTBG@PUIFSIUN
 
						

							CPVU
5IJT
.BOVBM






 

 





•  About This Guide

• Notational Descriptions





 


 


 



About This Manual
About This Guide
This electronic users guide is intended for anyone who uses the Philips\
 LCD Monitor. It 
describes the LCD monitors features, setup, operation and other importa\
nt information. Its 
contents are identical to the information in our printed version.
It includes the following sections:
µ




Safety and Troubleshooting Information provides tips and solutions for common problems 
as well as other related information you may need.


µ




About This Electronic Users Manual gives an overview of information inc\
luded, along with 
notation icon descriptions and other documentation for your reference.


µ




Product Information gives an overview of the monitors features as well as the technical 
specifications for this monitor.


µ




Installing Your Monitor describes the initial setup process and gives an overview of how to 
use the monitor. 
µ




On-Screen Display provides information on adjusting the settings on your monitor. 
µ




Customer Care and Warranty contains a list of worldwide Philips Consumer Information 
Centers along with help desk phone numbers and information on the warran\
ty applicable 
to your product.


µ




Glossary defines technical terms.

µ




Download and Print Option transfers this entire manual to your hard drive for easy 
reference.



RETURN TO TOP OF THE PAGE


Notational Descriptions
The following subsections describe notational conventions used in this d\
ocument. 
Notes, Cautions and Warnings


 



 



GJMF%]-$%.POJUPS0&.1IJMJQT.QSPKFDU99&%67POMJOFXBSSBOUZ:4PVSDF&/(-*4)9BCPVUBCPVUIUN
K
 
						

							CPVU
5IJT
.BOVBM
Throughout this guide, blocks of text may be accompanied by an icon and \
printed in bold or italic 
type. These blocks contain notes, cautions or warnings. They are used as\
 follows:
NOTE: This icon indicates important information and tips that help 
you make better use of your computer system.
CAUTION: This icon indicates information that tells you how to 
avoid either potential damage to hardware or loss of data.
WARNING: This icon indicates the potential for bodily harm and 
tells you how to avoid the problem.


Some warnings may appear in alternate formats and may not be accompanied\
 by an icon. In 
such cases, the specific presentation of the warning is mandated by the \
relevant regulatory 
authority.


RETURN TO TOP OF THE PAGE






 

 


GJMF%]-$%.POJUPS0&.1IJMJQT.QSPKFDU99&%67POMJOFXBSSBOUZ:4PVSDF&/(-*4)9BCPVUBCPVUIUN
K
 
						

							1SPEVDU
*OGPSNBUJPO






 

 




•Your LCD Monitor 
•  Smartimage
• SmartContrast
• SmartSaturate
• SmartSharpness 
• Technical Specifications
• Resolution & Preset Modes
• Philips Pixel Defect Policy
• Automatic Power Saving
• Physical Specification
• Pin Assignment
• Product Views
• Physical Function
• SmartControl II Product Information 
Your LCD monitor 
Congratulations on your purchase and welcome to Philips.
To fully benefit from the support that Philips offers, register 
your product at. www.philips.com/welcome





RETURN TO TOP OF THE PAGE

SmartImage
What is it? 
SmartImage provides presets that optimize display for different types of\
 content, dynamically adjusting brightness, 
contrast, color and sharpness in real time. Whether youre working with \
text applications, displaying images or watching 
a video, Philips SmartImage delivers great optimized LCD display perform\
ance.


Why do I need it? 
You want a LCD display that delivers optimized display all your favorite\
 types of content, SmartImage software 
dynamically adjust brightness, contrast, color and sharpness in real tim\
e to enhance your LCD viewing experience.
How does it work? 
SmartImage - software based on Philips award-winning LightFrame™ technology - analyzes the content displayed on 
your screen. Based on a scenario you select, SmartImage dynamically enha\
nces the contrast, color saturation 
and sharpness of images and video for ultimate display performance - all\
 in real time with the press on a single button.


How to enable SmartImage? 



GJMF%]-$%.POJUPS0&.1IJMJQT.QSPKFDU99&%67POMJOFXBSSBOUZ:4PVSDF&/(-*4)9QSPEVDUQSPEVDUIU 
						

							1SPEVDU
*OGPSNBUJPO

1.Press   to launch the SmartImage on screen display;
2. Keep press 
 to toggle between Office Work, Image Viewing, Entertainment, Economy, a\
nd Off; 
3. The SmartImage on screen display will remain on screen for 5 seconds or \
you can also press ”OK” to make 
confirmation. 
4. When SmartImage is enabled, the sRGB scheme is disabled automatically. T\
o use sRGB you need to 
disable SmartImage with the 
 button at the front bezel of your monitor.
Except using  key to scroll down, you can also press  buttons to choose and press “OK” to confirm selection 
and close the SmartImage OSD. There are five modes to be selected: Offic\
e Work, Image Viewing, Entertainment, 
Economy, and Off.
There are five modes to be selected: Office Work, Image Viewing, Enterta\
inment, Economy, and Off. 


GJMF%]-$%.POJUPS0&.1IJMJQT.QSPKFDU99&%67POMJOFXBSSBOUZ:4PVSDF&/(-*4)9QSPEVDUQSPEVDUIU 
						

							1SPEVDU
*OGPSNBUJPO





1.  Office Work: Enhances text and dampens brightness to increase readability and reduce\
 eye strain. This mode 
significantly enhances readability and productivity when youre working \
with spreadsheets, PDF files, scanned articles or 
other general office applications.
 
2.  
Image Viewing: This profile combines color saturation, dynamic contrast and sharpness \
enhancement to display 
photos and other images with outstanding clarity in vibrant colors - all\
 without artifacts and faded colors.
3.  Entertainment: Ramped up luminance, deepened color saturation, dynamic contrast and ra\
zor sharpness displays 
every details in darker areas of your videos without color washout in br\
ighter areas maintaining a dynamic natural values 
for the ultimate video display.
 
4.  
Economy: Under this profile, brightness, contrast are adjusted and backlighting f\
ine-tuned for just right display of 
everyday office applications and lower power consumption. 
5.  Off: No optimization by SmartImage.



RETURN TO TOP OF THE PAGE

SmartContrast
 
What is it? 
Unique technology that dynamically analyzes displayed content and automa\
tically optimizes a LCD monitors contrast 
ratio for maximum visual clarity and viewing enjoyment, stepping up back\
lighting for clearer, crisper and brighter images 
or dimming backlighting for clear display of images on dark backgrounds.\


Why do I need it? 
You want the very best visual clarity and viewing comfort for every type\
 of content. SmartContrast dynamically 
controls contrast and adjusts backlighting for clear, crisp, bright gami\
ng and video images or displays clear, readable text 
for office work. By reducing your monitors power consumption, you save \
on energy costs and extend the lifetime of 
your monitor.


GJMF%]-$%.POJUPS0&.1IJMJQT.QSPKFDU99&%67POMJOFXBSSBOUZ:4PVSDF&/(-*4)9QSPEVDUQSPEVDUIU