Philips 220c1sb User Manual
Here you can view all the pages of manual Philips 220c1sb User Manual. The Philips manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
4NBSU$POUSPM
User can enter PIN between 4 and 9 digits numbers only.After entering PIN, Accept button takes user to the pop-up dialog box on\
the following page.Minimum minutes set to 5. Slider set to 5 by default.Does not require the display be attached to a different host to go into \
theft mode.
Once a PIN is entered and accepted, the following dialog box appears:
µClick on No button takes user to the following screen....](http://img.usermanuals.tech/thumb/59/52355/w300_philips_220c1sb-user-manual-50.png "Page 51
4NBSU$POUSPM
User can enter PIN between 4 and 9 digits numbers only.After entering PIN, Accept button takes user to the pop-up dialog box on\
the following page.Minimum minutes set to 5. Slider set to 5 by default.Does not require the display be attached to a different host to go into \
theft mode.
Once a PIN is entered and accepted, the following dialog box appears:
µClick on No button takes user to the following screen....")
4NBSU$POUSPM User can enter PIN between 4 and 9 digits numbers only.After entering PIN, Accept button takes user to the pop-up dialog box on\ the following page.Minimum minutes set to 5. Slider set to 5 by default.Does not require the display be attached to a different host to go into \ theft mode. Once a PIN is entered and accepted, the following dialog box appears: µClick on No button takes user to the following screen....
Page 52
![Page 52
4NBSU$POUSPM
µClick on Yes button takes user to secure web site landing page.
After creating PIN, the Theft Deterrence pane will indicate Theft Deterr\
ence Enabled and provide PIN Options button:
Theft Deterrence Enabled is displayed.Disable Theft Mode opens pane screen on next page.PIN Options button only available after user creates PIN, button opens s\
ecure PIN web site.
Disable Theft button opens the following pane:
After entering PIN, Accept button disables PIN.Cancel...](http://img.usermanuals.tech/thumb/59/52355/w300_philips_220c1sb-user-manual-51.png "Page 52
4NBSU$POUSPM
µClick on Yes button takes user to secure web site landing page.
After creating PIN, the Theft Deterrence pane will indicate Theft Deterr\
ence Enabled and provide PIN Options button:
Theft Deterrence Enabled is displayed.Disable Theft Mode opens pane screen on next page.PIN Options button only available after user creates PIN, button opens s\
ecure PIN web site.
Disable Theft button opens the following pane:
After entering PIN, Accept button disables PIN.Cancel...")
4NBSU$POUSPM µClick on Yes button takes user to secure web site landing page. After creating PIN, the Theft Deterrence pane will indicate Theft Deterr\ ence Enabled and provide PIN Options button: Theft Deterrence Enabled is displayed.Disable Theft Mode opens pane screen on next page.PIN Options button only available after user creates PIN, button opens s\ ecure PIN web site. Disable Theft button opens the following pane: After entering PIN, Accept button disables PIN.Cancel...
Page 53
![Page 53
4NBSU$POUSPM
Options>Preferences - Will only be active when selecting Preferences fro\
m the drop-down Options menu. On a
non-supported display capable of DDC/CI, only the Help and Options tabs \
are available.
Displays current preference settings.A checked box enables the feature. The check box is a toggle.Enable Context Menu on desktop is checked (On) by default. Enable Cont\
ext menu displays SmartControl II selections for
Select Preset and Tune Display in the desktop right-click context...](http://img.usermanuals.tech/thumb/59/52355/w300_philips_220c1sb-user-manual-52.png "Page 53
4NBSU$POUSPM
Options>Preferences - Will only be active when selecting Preferences fro\
m the drop-down Options menu. On a
non-supported display capable of DDC/CI, only the Help and Options tabs \
are available.
Displays current preference settings.A checked box enables the feature. The check box is a toggle.Enable Context Menu on desktop is checked (On) by default. Enable Cont\
ext menu displays SmartControl II selections for
Select Preset and Tune Display in the desktop right-click context...")
4NBSU$POUSPM Options>Preferences - Will only be active when selecting Preferences fro\ m the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs \ are available. Displays current preference settings.A checked box enables the feature. The check box is a toggle.Enable Context Menu on desktop is checked (On) by default. Enable Cont\ ext menu displays SmartControl II selections for Select Preset and Tune Display in the desktop right-click context...
Page 54
![Page 54
4NBSU$POUSPM
Display the Source instruction pane and current input source setting.On single input displays, this pane will not be visible.
Options>Audio - Will only be active when selecting Volume from the drop-\
down Options menu.
On a non-supported display capable of DDC/CI, only the Help and Options \
tabs are available.
Option>Auto Pivot
GJMF&]-$%.POJUPS0&.1IJMJQT.QSPKFDU$$&%7$%$POUFOUTMDENBOVBM&/(-*4)$QSPEVDU4.3](http://img.usermanuals.tech/thumb/59/52355/w300_philips_220c1sb-user-manual-53.png "Page 54
4NBSU$POUSPM
Display the Source instruction pane and current input source setting.On single input displays, this pane will not be visible.
Options>Audio - Will only be active when selecting Volume from the drop-\
down Options menu.
On a non-supported display capable of DDC/CI, only the Help and Options \
tabs are available.
Option>Auto Pivot
GJMF&]-$%.POJUPS0&.1IJMJQT.QSPKFDU$$&%7$%$POUFOUTMDENBOVBM&/(-*4)$QSPEVDU4.3")
4NBSU$POUSPM Display the Source instruction pane and current input source setting.On single input displays, this pane will not be visible. Options>Audio - Will only be active when selecting Volume from the drop-\ down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options \ tabs are available. Option>Auto Pivot GJMF&]-$%.POJUPS0&.1IJMJQT.QSPKFDU$$&%7$%$POUFOUTMDENBOVBM&/(-*4)$QSPEVDU4.3
Page 55
![Page 55
4NBSU$POUSPM
Help>User Manual - Will only be active when selecting User Manual from t\
he drop-down Help menu. On a
non-supported display capable of DDC/CI, only the Help and Options tabs \
are available.
Help>Version - Will only be active when selecting Version from the drop-\
down Help menu. On a non-
supported display capable of DDC/CI, only the Help and Options tabs are \
available....](http://img.usermanuals.tech/thumb/59/52355/w300_philips_220c1sb-user-manual-54.png "Page 55
4NBSU$POUSPM
Help>User Manual - Will only be active when selecting User Manual from t\
he drop-down Help menu. On a
non-supported display capable of DDC/CI, only the Help and Options tabs \
are available.
Help>Version - Will only be active when selecting Version from the drop-\
down Help menu. On a non-
supported display capable of DDC/CI, only the Help and Options tabs are \
available....")
4NBSU$POUSPM Help>User Manual - Will only be active when selecting User Manual from t\ he drop-down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs \ are available. Help>Version - Will only be active when selecting Version from the drop-\ down Help menu. On a non- supported display capable of DDC/CI, only the Help and Options tabs are \ available....
Page 56
![Page 56
4NBSU$POUSPM
Context Sensitive menu
The Context Sensitive menu is Enabled by default. If Enable Context Menu\
has been checked in the
Options>Preferences pane, then the menu will be visible.
The Context Menu has four entries:
SmartControll II - When selected the About Screen is displayed.Select Preset - Provides a hierarchical menu of saved presets for immedi\
ate use. A check mark shows the currently selected
preset. Facoty Preset can also be called from the drop down menu.
Tune Display -...](http://img.usermanuals.tech/thumb/59/52355/w300_philips_220c1sb-user-manual-55.png "Page 56
4NBSU$POUSPM
Context Sensitive menu
The Context Sensitive menu is Enabled by default. If Enable Context Menu\
has been checked in the
Options>Preferences pane, then the menu will be visible.
The Context Menu has four entries:
SmartControll II - When selected the About Screen is displayed.Select Preset - Provides a hierarchical menu of saved presets for immedi\
ate use. A check mark shows the currently selected
preset. Facoty Preset can also be called from the drop down menu.
Tune Display -...")
4NBSU$POUSPM Context Sensitive menu The Context Sensitive menu is Enabled by default. If Enable Context Menu\ has been checked in the Options>Preferences pane, then the menu will be visible. The Context Menu has four entries: SmartControll II - When selected the About Screen is displayed.Select Preset - Provides a hierarchical menu of saved presets for immedi\ ate use. A check mark shows the currently selected preset. Facoty Preset can also be called from the drop down menu. Tune Display -...
Page 57
![Page 57
4NBSU$POUSPM
The task tray menu can be displayed by right-clicking on the SmartContro\
l II icon from the task tray. Left Click will launch
the application.
The task tray has five entries:
Help - Access to User Manual file: opnes User Manual file using the defa\
ult browser window.Technical Support - displays the tech support page.Check for Update - takes the user to PDI Landing and checks the users v\
ersion against the most current available.About - Displays detailed reference...](http://img.usermanuals.tech/thumb/59/52355/w300_philips_220c1sb-user-manual-56.png "Page 57
4NBSU$POUSPM
The task tray menu can be displayed by right-clicking on the SmartContro\
l II icon from the task tray. Left Click will launch
the application.
The task tray has five entries:
Help - Access to User Manual file: opnes User Manual file using the defa\
ult browser window.Technical Support - displays the tech support page.Check for Update - takes the user to PDI Landing and checks the users v\
ersion against the most current available.About - Displays detailed reference...")
4NBSU$POUSPM The task tray menu can be displayed by right-clicking on the SmartContro\ l II icon from the task tray. Left Click will launch the application. The task tray has five entries: Help - Access to User Manual file: opnes User Manual file using the defa\ ult browser window.Technical Support - displays the tech support page.Check for Update - takes the user to PDI Landing and checks the users v\ ersion against the most current available.About - Displays detailed reference...
Page 58
![Page 58
4NBSU$POUSPM
Q1. I change the monitor on a PC to a different one and the SmartControl bec\
omes un-usable, what do I do?
A. Restart your PC and see if SmartControl can work. Otherwise, you will ne\
ed to remove and re-install SmartControl
to ensure proper driver is installed.
Q2. The SmartControl functions well at the beginning, but it is not workable\
, what can I do?
A. If the following actions were executed, the monitor driver may need to \
be re-installed.
µChange video graphic adapter to...](http://img.usermanuals.tech/thumb/59/52355/w300_philips_220c1sb-user-manual-57.png "Page 58
4NBSU$POUSPM
Q1. I change the monitor on a PC to a different one and the SmartControl bec\
omes un-usable, what do I do?
A. Restart your PC and see if SmartControl can work. Otherwise, you will ne\
ed to remove and re-install SmartControl
to ensure proper driver is installed.
Q2. The SmartControl functions well at the beginning, but it is not workable\
, what can I do?
A. If the following actions were executed, the monitor driver may need to \
be re-installed.
µChange video graphic adapter to...")
4NBSU$POUSPM Q1. I change the monitor on a PC to a different one and the SmartControl bec\ omes un-usable, what do I do? A. Restart your PC and see if SmartControl can work. Otherwise, you will ne\ ed to remove and re-install SmartControl to ensure proper driver is installed. Q2. The SmartControl functions well at the beginning, but it is not workable\ , what can I do? A. If the following actions were executed, the monitor driver may need to \ be re-installed. µChange video graphic adapter to...
Page 59
![Page 59
4NBSU$POUSPM
RETURN TO TOP OF THE PAGE
GJMF&]-$%.POJUPS0&.1IJMJQT.QSPKFDU$$&%7$%$POUFOUTMDENBOVBM&/(-*4)$QSPEVDU4.3](http://img.usermanuals.tech/thumb/59/52355/w300_philips_220c1sb-user-manual-58.png "Page 59
4NBSU$POUSPM
RETURN TO TOP OF THE PAGE
GJMF&]-$%.POJUPS0&.1IJMJQT.QSPKFDU$$&%7$%$POUFOUTMDENBOVBM&/(-*4)$QSPEVDU4.3")
4NBSU$POUSPM RETURN TO TOP OF THE PAGE GJMF&]-$%.POJUPS0&.1IJMJQT.QSPKFDU$$&%7$%$POUFOUTMDENBOVBM&/(-*4)$QSPEVDU4.3
Page 60
![Page 60
*OTUBMMJOH:PVS-$%.POJUPS
• Front View Produt Description
• Connecting to Your PC
• The Base
• Getting Started
• Optimizing Performance
Installing Your LCD Monitor
Front View Product Description
1To switch monitors power On and Off
2
To access the OSD menu
3
To adjust the OSD menu
4
Change to 4:3 display
5
InputTo change the signal input source
6
Automatically adjust the horizontal position, vertical position, phase a\
nd
clock settings / Return to previous OSD level
7
To...](http://img.usermanuals.tech/thumb/59/52355/w300_philips_220c1sb-user-manual-59.png "Page 60
*OTUBMMJOH:PVS-$%.POJUPS
• Front View Produt Description
• Connecting to Your PC
• The Base
• Getting Started
• Optimizing Performance
Installing Your LCD Monitor
Front View Product Description
1To switch monitors power On and Off
2
To access the OSD menu
3
To adjust the OSD menu
4
Change to 4:3 display
5
InputTo change the signal input source
6
Automatically adjust the horizontal position, vertical position, phase a\
nd
clock settings / Return to previous OSD level
7
To...")
*OTUBMMJOH:PVS-$%.POJUPS • Front View Produt Description • Connecting to Your PC • The Base • Getting Started • Optimizing Performance Installing Your LCD Monitor Front View Product Description 1To switch monitors power On and Off 2 To access the OSD menu 3 To adjust the OSD menu 4 Change to 4:3 display 5 InputTo change the signal input source 6 Automatically adjust the horizontal position, vertical position, phase a\ nd clock settings / Return to previous OSD level 7 To...